[PATCH net-next 3/3] net: phy: realtek: switch from paged to MMD ops in rtl822x functions

[Heiner Kallweit <hkallweit1@gmail.com>]

The MDIO bus provided by r8169 for the internal PHY's now supports
c45 ops for the MDIO_MMD_VEND2 device. So we can switch to standard
MMD ops here.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/net/phy/realtek/realtek_main.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/net/phy/realtek/realtek_main.c b/drivers/net/phy/realtek/realtek_main.c
index 2e2c5353c..34be1d752 100644
--- a/drivers/net/phy/realtek/realtek_main.c
+++ b/drivers/net/phy/realtek/realtek_main.c
@@ -901,7 +901,7 @@ static int rtl822x_get_features(struct phy_device *phydev)
 {
 	int val;
 
-	val = phy_read_paged(phydev, 0xa61, 0x13);
+	val = phy_read_mmd(phydev, MDIO_MMD_VEND2, 0xa616);
 	if (val < 0)
 		return val;
 
@@ -922,10 +922,9 @@ static int rtl822x_config_aneg(struct phy_device *phydev)
 	if (phydev->autoneg == AUTONEG_ENABLE) {
 		u16 adv = linkmode_adv_to_mii_10gbt_adv_t(phydev->advertising);
 
-		ret = phy_modify_paged_changed(phydev, 0xa5d, 0x12,
-					       MDIO_AN_10GBT_CTRL_ADV2_5G |
-					       MDIO_AN_10GBT_CTRL_ADV5G,
-					       adv);
+		ret = phy_modify_mmd_changed(phydev, MDIO_MMD_VEND2, 0xa5d4,
+					     MDIO_AN_10GBT_CTRL_ADV2_5G |
+					     MDIO_AN_10GBT_CTRL_ADV5G, adv);
 		if (ret < 0)
 			return ret;
 	}
@@ -969,7 +968,7 @@ static int rtl822x_read_status(struct phy_device *phydev)
 	    !phydev->autoneg_complete)
 		return 0;
 
-	lpadv = phy_read_paged(phydev, 0xa5d, 0x13);
+	lpadv = phy_read_mmd(phydev, MDIO_MMD_VEND2, 0xa5d6);
 	if (lpadv < 0)
 		return lpadv;
 
-- 
2.48.1