From: Zhu Yanjun <yanjun.zhu@linux.dev>
To: "Gustavo A. R. Silva" <gustavo@embeddedor.com>,
zyjzyj2000@gmail.com, jgg@ziepe.ca, leon@kernel.org,
linux-rdma@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Subject: Re: [PATCH v3 1/1] RDMA/rxe: Avoid -Wflex-array-member-not-at-end warnings
Date: Mon, 22 Dec 2025 21:10:11 -0800 [thread overview]
Message-ID: <4a8e3365-cb74-4531-99dc-9d2911045d4b@linux.dev> (raw)
In-Reply-To: <ea716013-0149-40fa-b781-b0968980b7bd@embeddedor.com>
在 2025/12/22 21:03, Gustavo A. R. Silva 写道:
>
>
> On 12/23/25 13:41, Zhu Yanjun wrote:
>> From: "Gustavo A. R. Silva" <gustavoars@kernel.org>
>>
>> -Wflex-array-member-not-at-end was introduced in GCC-14, and we are
>> getting ready to enable it, globally.
>>
>> Use the new TRAILING_OVERLAP() helper to fix the following warning:
>>
>> 21 drivers/infiniband/sw/rxe/rxe_verbs.h:271:33: warning: structure
>> containing a flexible array member is not at the end of another
>> structure [-Wflex-array-member-not-at-end]
>>
>> This helper creates a union between a flexible-array member (FAM) and a
>> set of MEMBERS that would otherwise follow it.
>>
>> This overlays the trailing MEMBER struct ib_sge sge[RXE_MAX_SGE]; onto
>> the FAM struct rxe_recv_wqe::dma.sge, while keeping the FAM and the
>> start of MEMBER aligned.
>>
>> The static_assert() ensures this alignment remains, and it's
>> intentionally placed inmediately after the related structure --no
>> blank line in between.
>>
>> Lastly, move the conflicting declaration struct rxe_resp_info resp;
>> to the end of the corresponding structure.
>>
>> Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
>> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
>> ---
>> V2->V3: Replace struct ib_sge with struct rxe_sge
>
> What are you doing?
Because struct rxe_sge differs from struct ib_sge, I aligned it to use
the same structure.
Yanjun.Zhu
>
> You're making a mess of this whole thing. Please, don't make changes
> to my patches on your own.
>
> -Gustavo
>
>> ---
>> drivers/infiniband/sw/rxe/rxe_verbs.h | 18 +++++++++++-------
>> 1 file changed, 11 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.h
>> b/drivers/infiniband/sw/rxe/rxe_verbs.h
>> index fd48075810dd..3ffd7be8e7b1 100644
>> --- a/drivers/infiniband/sw/rxe/rxe_verbs.h
>> +++ b/drivers/infiniband/sw/rxe/rxe_verbs.h
>> @@ -219,12 +219,6 @@ struct rxe_resp_info {
>> u32 rkey;
>> u32 length;
>> - /* SRQ only */
>> - struct {
>> - struct rxe_recv_wqe wqe;
>> - struct ib_sge sge[RXE_MAX_SGE];
>> - } srq_wqe;
>> -
>> /* Responder resources. It's a circular list where the oldest
>> * resource is dropped first.
>> */
>> @@ -232,7 +226,15 @@ struct rxe_resp_info {
>> unsigned int res_head;
>> unsigned int res_tail;
>> struct resp_res *res;
>> +
>> + /* SRQ only */
>> + /* Must be last as it ends in a flexible-array member. */
>> + TRAILING_OVERLAP(struct rxe_recv_wqe, wqe, dma.sge,
>> + struct rxe_sge sge[RXE_MAX_SGE];
>> + ) srq_wqe;
>> };
>> +static_assert(offsetof(struct rxe_resp_info, srq_wqe.wqe.dma.sge) ==
>> + offsetof(struct rxe_resp_info, srq_wqe.sge));
>> struct rxe_qp {
>> struct ib_qp ibqp;
>> @@ -269,7 +271,6 @@ struct rxe_qp {
>> struct rxe_req_info req;
>> struct rxe_comp_info comp;
>> - struct rxe_resp_info resp;
>> atomic_t ssn;
>> atomic_t skb_out;
>> @@ -289,6 +290,9 @@ struct rxe_qp {
>> spinlock_t state_lock; /* guard requester and completer */
>> struct execute_work cleanup_work;
>> +
>> + /* Must be last as it ends in a flexible-array member. */
>> + struct rxe_resp_info resp;
>> };
>> enum {
>
--
Best Regards,
Yanjun.Zhu
next prev parent reply other threads:[~2025-12-23 5:10 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-23 4:41 [PATCH v3 1/1] RDMA/rxe: Avoid -Wflex-array-member-not-at-end warnings Zhu Yanjun
2025-12-23 5:03 ` Gustavo A. R. Silva
2025-12-23 5:10 ` Zhu Yanjun [this message]
2025-12-23 5:18 ` Gustavo A. R. Silva
2025-12-23 5:26 ` Zhu Yanjun
2025-12-23 5:34 ` Gustavo A. R. Silva
2025-12-23 5:44 ` Zhu Yanjun
2025-12-23 5:54 ` Gustavo A. R. Silva
2025-12-23 6:46 ` Zhu Yanjun
2025-12-23 9:28 ` Gustavo A. R. Silva
2025-12-23 16:02 ` Zhu Yanjun
2025-12-23 14:20 ` Leon Romanovsky
2025-12-23 16:13 ` Zhu Yanjun
2025-12-23 9:34 ` Gustavo A. R. Silva
2025-12-23 16:38 ` Greg Sword
2025-12-23 16:59 ` Gustavo A. R. Silva
2025-12-23 17:19 ` Greg Sword
2025-12-23 17:26 ` Gustavo A. R. Silva
2025-12-24 6:51 ` Leon Romanovsky
2025-12-24 8:32 ` Gustavo A. R. Silva
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4a8e3365-cb74-4531-99dc-9d2911045d4b@linux.dev \
--to=yanjun.zhu@linux.dev \
--cc=gustavo@embeddedor.com \
--cc=gustavoars@kernel.org \
--cc=jgg@ziepe.ca \
--cc=leon@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=zyjzyj2000@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.