From: jeff.xie@linux.dev
To: "Masami Hiramatsu" <mhiramat@kernel.org>
Cc: rostedt@goodmis.org, mathieu.desnoyers@efficios.com,
linux-trace-kernel@vger.kernel.org, linux-kernel@vger.kernel.org,
xiehuan09@gmail.com
Subject: Re: [PATCH v2] ftrace: Get the true parent ip for function tracer
Date: Mon, 09 Sep 2024 16:21:33 +0000 [thread overview]
Message-ID: <4aeb59e2ea195542458b069be4afb5e2c53c8b55@linux.dev> (raw)
In-Reply-To: <20240910001326.87f27e6b312f1d956cf352a2@kernel.org>
September 9, 2024 at 11:13 PM, "Masami Hiramatsu" <mhiramat@kernel.org> wrote:
Hi Masami,
>
> On Thu, 22 Aug 2024 07:30:21 +0800
>
> Jeff Xie <jeff.xie@linux.dev> wrote:
>
> >
> > Currently, when using both function tracer and function graph simultaneously,
> >
> > it is found that function tracer sometimes captures a fake parent ip(return_to_handler)
> >
> > instead of the true parent ip.
> >
> >
> >
> > This issue is easy to reproduce. Below are my reproduction steps:
> >
> >
> >
> > jeff-labs:~/bin # ./trace-net.sh
> >
> >
> >
> > jeff-labs:~/bin # cat /sys/kernel/debug/tracing/instances/foo/trace | grep return_to_handler
> >
> > trace-net.sh-405 [001] ...2. 31.859501: avc_has_perm+0x4/0x190 <-return_to_handler+0x0/0x40
> >
> > trace-net.sh-405 [001] ...2. 31.859503: simple_setattr+0x4/0x70 <-return_to_handler+0x0/0x40
> >
> > trace-net.sh-405 [001] ...2. 31.859503: truncate_pagecache+0x4/0x60 <-return_to_handler+0x0/0x40
> >
> > trace-net.sh-405 [001] ...2. 31.859505: unmap_mapping_range+0x4/0x140 <-return_to_handler+0x0/0x40
> >
> > trace-net.sh-405 [001] ...3. 31.859508: _raw_spin_unlock+0x4/0x30 <-return_to_handler+0x0/0x40
> >
> > [...]
> >
>
> Can you also add
Was there more you intended to say after this?
>
> >
> > The following is my simple trace script:
> >
> >
> >
> > <snip>
> >
> > jeff-labs:~/bin # cat ./trace-net.sh
> >
> > TRACE_PATH="/sys/kernel/debug/tracing"
> >
> >
> >
> > set_events() {
> >
> > echo 1 > $1/events/net/enable
> >
> > echo 1 > $1/events/tcp/enable
> >
> > echo 1 > $1/events/sock/enable
> >
> > echo 1 > $1/events/napi/enable
> >
> > echo 1 > $1/events/fib/enable
> >
> > echo 1 > $1/events/neigh/enable
> >
> > }
> >
> >
> >
> > set_events ${TRACE_PATH}
> >
> > echo 1 > ${TRACE_PATH}/options/sym-offset
> >
> > echo 1 > ${TRACE_PATH}/options/funcgraph-tail
> >
> > echo 1 > ${TRACE_PATH}/options/funcgraph-proc
> >
> > echo 1 > ${TRACE_PATH}/options/funcgraph-abstime
> >
> >
> >
> > echo 'tcp_orphan*' > ${TRACE_PATH}/set_ftrace_notrace
> >
> > echo function_graph > ${TRACE_PATH}/current_tracer
> >
> >
> >
> > INSTANCE_FOO=${TRACE_PATH}/instances/foo
> >
> > if [ ! -e $INSTANCE_FOO ]; then
> >
> > mkdir ${INSTANCE_FOO}
> >
> > fi
> >
> > set_events ${INSTANCE_FOO}
> >
> > echo 1 > ${INSTANCE_FOO}/options/sym-offset
> >
> > echo 'tcp_orphan*' > ${INSTANCE_FOO}/set_ftrace_notrace
> >
> > echo function > ${INSTANCE_FOO}/current_tracer
> >
> >
> >
> > echo 1 > ${TRACE_PATH}/tracing_on
> >
> > echo 1 > ${INSTANCE_FOO}/tracing_on
> >
> >
> >
> > echo > ${TRACE_PATH}/trace
> >
> > echo > ${INSTANCE_FOO}/trace
> >
> > </snip>
> >
> >
> >
> > Signed-off-by: Jeff Xie <jeff.xie@linux.dev>
> >
> > ---
> >
> > v2:
> >
> > - Adding __always_inline to function_get_true_parent_ip suggested by Steve
> >
> >
> >
> > kernel/trace/trace_functions.c | 18 ++++++++++++++++++
> >
> > 1 file changed, 18 insertions(+)
> >
> >
> >
> > diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c
> >
> > index 3b0cea37e029..d989e927c898 100644
> >
> > --- a/kernel/trace/trace_functions.c
> >
> > +++ b/kernel/trace/trace_functions.c
> >
> > @@ -176,6 +176,19 @@ static void function_trace_start(struct trace_array *tr)
> >
> > tracing_reset_online_cpus(&tr->array_buffer);
> >
> > }
> >
> >
> >
> > +static __always_inline unsigned long
> >
> > +function_get_true_parent_ip(unsigned long parent_ip, struct ftrace_regs *fregs)
> >
> > +{
> >
> > + unsigned long true_parent_ip;
> >
> > + int idx = 0;
> >
> > +
> >
> > + true_parent_ip = parent_ip;
> >
> > + if (unlikely(parent_ip == (unsigned long)&return_to_handler))
> >
> > + true_parent_ip = ftrace_graph_ret_addr(current, &idx, parent_ip,
> >
> > + (unsigned long *)fregs->regs.sp);
> >
> > + return true_parent_ip;
> >
> > +}
> >
>
> Can this work without CONFIG_FUNCTION_GRAPH_TRACER? Maybe it cause a build error
>
> because return_to_handler is not defined.
>
> Could you check it?
I believed I had checked it before, but I actually found a build error. I will fix it. ;-)
>
> Thank you,
>
> >
> > +
> >
> > static void
> >
> > function_trace_call(unsigned long ip, unsigned long parent_ip,
> >
> > struct ftrace_ops *op, struct ftrace_regs *fregs)
> >
> > @@ -193,6 +206,8 @@ function_trace_call(unsigned long ip, unsigned long parent_ip,
> >
> > if (bit < 0)
> >
> > return;
> >
> >
> >
> > + parent_ip = function_get_true_parent_ip(parent_ip, fregs);
> >
> > +
> >
> > trace_ctx = tracing_gen_ctx();
> >
> >
> >
> > cpu = smp_processor_id();
> >
> > @@ -241,6 +256,7 @@ function_stack_trace_call(unsigned long ip, unsigned long parent_ip,
> >
> > * recursive protection is performed.
> >
> > */
> >
> > local_irq_save(flags);
> >
> > + parent_ip = function_get_true_parent_ip(parent_ip, fregs);
> >
> > cpu = raw_smp_processor_id();
> >
> > data = per_cpu_ptr(tr->array_buffer.data, cpu);
> >
> > disabled = atomic_inc_return(&data->disabled);
> >
> > @@ -309,6 +325,7 @@ function_no_repeats_trace_call(unsigned long ip, unsigned long parent_ip,
> >
> > if (bit < 0)
> >
> > return;
> >
> >
> >
> > + parent_ip = function_get_true_parent_ip(parent_ip, fregs);
> >
> > cpu = smp_processor_id();
> >
> > data = per_cpu_ptr(tr->array_buffer.data, cpu);
> >
> > if (atomic_read(&data->disabled))
> >
> > @@ -356,6 +373,7 @@ function_stack_no_repeats_trace_call(unsigned long ip, unsigned long parent_ip,
> >
> > * recursive protection is performed.
> >
> > */
> >
> > local_irq_save(flags);
> >
> > + parent_ip = function_get_true_parent_ip(parent_ip, fregs);
> >
> > cpu = raw_smp_processor_id();
> >
> > data = per_cpu_ptr(tr->array_buffer.data, cpu);
> >
> > disabled = atomic_inc_return(&data->disabled);
> >
> > --
> >
> > 2.34.1
> >
>
> --
>
> Masami Hiramatsu (Google) <mhiramat@kernel.org>
>
prev parent reply other threads:[~2024-09-09 16:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-21 23:30 [PATCH v2] ftrace: Get the true parent ip for function tracer Jeff Xie
2024-09-09 14:08 ` jeff.xie
2024-09-09 15:13 ` Masami Hiramatsu
2024-09-09 16:21 ` jeff.xie [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4aeb59e2ea195542458b069be4afb5e2c53c8b55@linux.dev \
--to=jeff.xie@linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-trace-kernel@vger.kernel.org \
--cc=mathieu.desnoyers@efficios.com \
--cc=mhiramat@kernel.org \
--cc=rostedt@goodmis.org \
--cc=xiehuan09@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.