From: Tony Breeds <tony@bakeyournoodle.com>
To: Xen-Devel <xen-devel@lists.xensource.com>
Cc: XenPPC-Devel <xen-ppc-devel@lists.xensource.com>
Subject: [PATCH 1/3][TOOLS][XM-TEST] Update all block tests to use the Xen Virtual Block Device (xvd) rather than IDE or SCSI
Date: Mon, 30 Oct 2006 16:38:59 +1100 [thread overview]
Message-ID: <4b13f1fdba2dece28f01.1162186739@localhost.localdomain> (raw)
In-Reply-To: <patchbomb.1162186738@localhost.localdomain>
Update all block tests to use the Xen Virtual Block Device (xvd) rather than IDE or SCSI.
This patch also modifies
09_block_attach_and_dettach_device_check_data_pos.py to force / to be
read-write otherwise the mkdir fails.
Also Whistspace cleanups.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
---
tools/xm-test/tests/block-create/01_block_attach_device_pos.py | 10 +-
tools/xm-test/tests/block-create/02_block_attach_file_device_pos.py | 8 -
tools/xm-test/tests/block-create/04_block_attach_device_repeatedly_pos.py | 16 +--
tools/xm-test/tests/block-create/05_block_attach_and_dettach_device_repeatedly_pos.py | 18 ++--
tools/xm-test/tests/block-create/06_block_attach_baddomain_neg.py | 8 -
tools/xm-test/tests/block-create/07_block_attach_baddevice_neg.py | 14 +--
tools/xm-test/tests/block-create/08_block_attach_bad_filedevice_neg.py | 16 +--
tools/xm-test/tests/block-create/09_block_attach_and_dettach_device_check_data_pos.py | 44 +++++-----
tools/xm-test/tests/block-create/10_block_attach_dettach_multiple_devices.py | 30 +++---
tools/xm-test/tests/block-create/11_block_attach_shared_dom0.py | 2
tools/xm-test/tests/block-create/12_block_attach_shared_domU.py | 2
tools/xm-test/tests/block-destroy/01_block-destroy_btblock_pos.py | 8 -
tools/xm-test/tests/block-destroy/02_block-destroy_rtblock_pos.py | 8 -
tools/xm-test/tests/block-destroy/04_block-destroy_nonattached_neg.py | 2
tools/xm-test/tests/block-destroy/05_block-destroy_byname_pos.py | 8 -
tools/xm-test/tests/block-destroy/06_block-destroy_check_list_pos.py | 10 +-
tools/xm-test/tests/block-integrity/01_block_device_read_verify.py | 4
tools/xm-test/tests/block-integrity/02_block_device_write_verify.py | 4
tools/xm-test/tests/block-list/01_block-list_pos.py | 6 -
tools/xm-test/tests/block-list/02_block-list_attachbd_pos.py | 6 -
tools/xm-test/tests/block-list/03_block-list_anotherbd_pos.py | 10 +-
tools/xm-test/tests/block-list/06_block-list_checkremove_pos.py | 24 ++---
22 files changed, 128 insertions(+), 130 deletions(-)
--- a/tools/xm-test/tests/block-create/01_block_attach_device_pos.py Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/01_block_attach_device_pos.py Thu Oct 26 18:57:46 2006 +1000
@@ -32,12 +32,12 @@ except ConsoleError, e:
FAIL(str(e))
-block_attach(domain, "phy:ram1", "sdb1")
+block_attach(domain, "phy:ram1", "xvda1")
-try:
- run = console.runCmd("cat /proc/partitions")
+try:
+ run = console.runCmd("cat /proc/partitions")
except ConsoleError, e:
- FAIL(str(e))
+ FAIL(str(e))
# Close the console
domain.closeConsole()
@@ -45,5 +45,5 @@ domain.closeConsole()
# Stop the domain (nice shutdown)
domain.stop()
-if not re.search("sdb1",run["output"]):
+if not re.search("xvda1",run["output"]):
FAIL("Device is not actually connected to the domU")
diff -r 6186ec41fc18 -r 4b13f1fdba2d tools/xm-test/tests/block-create/02_block_attach_file_device_pos.py
--- a/tools/xm-test/tests/block-create/02_block_attach_file_device_pos.py Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/02_block_attach_file_device_pos.py Thu Oct 26 18:57:46 2006 +1000
@@ -32,10 +32,10 @@ except ConsoleError, e:
FAIL(str(e))
-block_attach(domain, "file:/dev/ram1", "sdb2")
+block_attach(domain, "file:/dev/ram1", "xvda1")
try:
- run = console.runCmd("cat /proc/partitions")
+ run = console.runCmd("cat /proc/partitions")
except ConsoleError, e:
FAIL(str(e))
@@ -45,5 +45,5 @@ domain.closeConsole()
# Stop the domain (nice shutdown)
domain.stop()
-if not re.search("sdb2",run["output"]):
- FAIL("Device is not actually connected to the domU")
+if not re.search("xvda1",run["output"]):
+ FAIL("Device is not actually connected to the domU")
diff -r 6186ec41fc18 -r 4b13f1fdba2d tools/xm-test/tests/block-create/04_block_attach_device_repeatedly_pos.py
--- a/tools/xm-test/tests/block-create/04_block_attach_device_repeatedly_pos.py Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/04_block_attach_device_repeatedly_pos.py Thu Oct 26 18:57:46 2006 +1000
@@ -30,14 +30,14 @@ except ConsoleError, e:
FAIL(str(e))
for i in range(10):
- status, output = traceCommand("xm block-attach %s phy:ram1 sdb1 w" % domain.getName())
- if i == 0 and status != 0:
- FAIL("xm block attach returned invalid %i != 0" % status)
- if i > 0 and status == 0:
- FAIL("xm block-attach (repeat) returned invalid %i > 0" % status)
- run = console.runCmd("cat /proc/partitions")
- if not re.search("sdb1", run['output']):
- FAIL("Device is not actually attached to domU")
+ status, output = traceCommand("xm block-attach %s phy:ram1 xvda1 w" % domain.getName())
+ if i == 0 and status != 0:
+ FAIL("xm block attach returned invalid %i != 0" % status)
+ if i > 0 and status == 0:
+ FAIL("xm block-attach (repeat) returned invalid %i > 0" % status)
+ run = console.runCmd("cat /proc/partitions")
+ if not re.search("xvda1", run['output']):
+ FAIL("Device is not actually attached to domU")
# Close the console
domain.closeConsole()
diff -r 6186ec41fc18 -r 4b13f1fdba2d tools/xm-test/tests/block-create/05_block_attach_and_dettach_device_repeatedly_pos.py
--- a/tools/xm-test/tests/block-create/05_block_attach_and_dettach_device_repeatedly_pos.py Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/05_block_attach_and_dettach_device_repeatedly_pos.py Thu Oct 26 18:57:46 2006 +1000
@@ -32,15 +32,15 @@ except ConsoleError, e:
for i in range(10):
- block_attach(domain, "phy:ram1", "sdb1")
- run = console.runCmd("cat /proc/partitions")
- if not re.search("sdb1", run["output"]):
- FAIL("Failed to attach block device: /proc/partitions does not show that!")
-
- block_detach(domain, "sdb1")
- run = console.runCmd("cat /proc/partitions")
- if re.search("sdb1", run["output"]):
- FAIL("Failed to dettach block device: /proc/partitions still showing that!")
+ block_attach(domain, "phy:ram1", "xvda1")
+ run = console.runCmd("cat /proc/partitions")
+ if not re.search("xvda1", run["output"]):
+ FAIL("Failed to attach block device: /proc/partitions does not show that!")
+
+ block_detach(domain, "xvda1")
+ run = console.runCmd("cat /proc/partitions")
+ if re.search("xvda1", run["output"]):
+ FAIL("Failed to dettach block device: /proc/partitions still showing that!")
# Close the console
domain.closeConsole()
diff -r 6186ec41fc18 -r 4b13f1fdba2d tools/xm-test/tests/block-create/06_block_attach_baddomain_neg.py
--- a/tools/xm-test/tests/block-create/06_block_attach_baddomain_neg.py Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/06_block_attach_baddomain_neg.py Thu Oct 26 18:57:46 2006 +1000
@@ -8,13 +8,11 @@ if ENABLE_HVM_SUPPORT:
if ENABLE_HVM_SUPPORT:
SKIP("Block-attach not supported for HVM domains")
-status, output = traceCommand("xm block-attach NOT-EXIST phy:ram1 sdb1 w")
+status, output = traceCommand("xm block-attach NOT-EXIST phy:ram1 xvda1 w")
eyecatcher = "Error"
where = output.find(eyecatcher)
if status == 0:
- FAIL("xm block-attach returned bad status, expected non 0, status is: %i" % status )
+ FAIL("xm block-attach returned bad status, expected non 0, status is: %i" % status )
elif where == -1:
- FAIL("xm block-attach returned bad output, expected Error, output is: %s" % output )
-
-
+ FAIL("xm block-attach returned bad output, expected Error, output is: %s" % output )
diff -r 6186ec41fc18 -r 4b13f1fdba2d tools/xm-test/tests/block-create/07_block_attach_baddevice_neg.py
--- a/tools/xm-test/tests/block-create/07_block_attach_baddevice_neg.py Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/07_block_attach_baddevice_neg.py Thu Oct 26 18:57:46 2006 +1000
@@ -30,18 +30,18 @@ except ConsoleError, e:
FAIL(str(e))
-status, output = traceCommand("xm block-attach %s phy:NOT-EXIST sdb1 w" % domain.getName())
+status, output = traceCommand("xm block-attach %s phy:NOT-EXIST xvda1 w" % domain.getName())
eyecatcher = "Error"
where = output.find(eyecatcher)
if status == 0:
- FAIL("xm block-attach returned bad status, expected non 0, status is: %i" % status )
+ FAIL("xm block-attach returned bad status, expected non 0, status is: %i" % status )
elif where == -1:
- FAIL("xm block-attach returned bad output, expected Error, output is: %s" % output )
+ FAIL("xm block-attach returned bad output, expected Error, output is: %s" % output )
try:
- run = console.runCmd("cat /proc/partitions")
+ run = console.runCmd("cat /proc/partitions")
except ConsoleError, e:
- FAIL(str(e))
+ FAIL(str(e))
# Close the console
domain.closeConsole()
@@ -49,5 +49,5 @@ domain.closeConsole()
# Stop the domain (nice shutdown)
domain.stop()
-if re.search("sdb1",run["output"]):
- FAIL("Non existent Device was connected to the domU")
+if re.search("xvda1",run["output"]):
+ FAIL("Non existent Device was connected to the domU")
diff -r 6186ec41fc18 -r 4b13f1fdba2d tools/xm-test/tests/block-create/08_block_attach_bad_filedevice_neg.py
--- a/tools/xm-test/tests/block-create/08_block_attach_bad_filedevice_neg.py Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/08_block_attach_bad_filedevice_neg.py Thu Oct 26 18:57:46 2006 +1000
@@ -29,18 +29,18 @@ except ConsoleError, e:
saveLog(console.getHistory())
FAIL(str(e))
-status, output = traceCommand("xm block-attach %s file:/dev/NOT-EXIST sdb1 w" % domain.getName())
+status, output = traceCommand("xm block-attach %s file:/dev/NOT-EXIST xvda1 w" % domain.getName())
eyecatcher = "Error"
where = output.find(eyecatcher)
if status == 0:
- FAIL("xm block-attach returned bad status, expected non 0, status is: %i" % status )
+ FAIL("xm block-attach returned bad status, expected non 0, status is: %i" % status )
elif where == -1:
- FAIL("xm block-attach returned bad output, expected Error, output is: %s" % output )
-
+ FAIL("xm block-attach returned bad output, expected Error, output is: %s" % output )
+
try:
- run = console.runCmd("cat /proc/partitions")
+ run = console.runCmd("cat /proc/partitions")
except ConsoleError, e:
- FAIL(str(e))
+ FAIL(str(e))
# Close the console
domain.closeConsole()
@@ -48,5 +48,5 @@ domain.closeConsole()
# Stop the domain (nice shutdown)
domain.stop()
-if re.search("sdb1",run["output"]):
- FAIL("Non existent Device was connected to the domU")
+if re.search("xvda1",run["output"]):
+ FAIL("Non existent Device was connected to the domU")
diff -r 6186ec41fc18 -r 4b13f1fdba2d tools/xm-test/tests/block-create/09_block_attach_and_dettach_device_check_data_pos.py
--- a/tools/xm-test/tests/block-create/09_block_attach_and_dettach_device_check_data_pos.py Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/09_block_attach_and_dettach_device_check_data_pos.py Thu Oct 26 18:57:46 2006 +1000
@@ -12,7 +12,7 @@ if ENABLE_HVM_SUPPORT:
SKIP("Block-attach not supported for HVM domains")
# Create a domain (default XmTestDomain, with our ramdisk)
-domain = XmTestDomain()
+domain = XmTestDomain(extraConfig={"extra":"rw"})
try:
console = domain.start()
@@ -35,27 +35,27 @@ if s != 0:
FAIL("mke2fs returned %i != 0" % s)
for i in range(10):
- block_attach(domain, "phy:ram1", "hda1")
- run = console.runCmd("cat /proc/partitions")
- if not re.search("hda1", run["output"]):
- FAIL("Failed to attach block device: /proc/partitions does not show that!")
-
- console.runCmd("mkdir -p /mnt/hda1; mount /dev/hda1 /mnt/hda1")
-
- if i:
- run = console.runCmd("cat /mnt/hda1/myfile | grep %s" % (i-1))
- if run['return']:
- FAIL("File created was lost or not updated!")
-
- console.runCmd("echo \"%s\" > /mnt/hda1/myfile" % i)
- run = console.runCmd("cat /mnt/hda1/myfile")
- print run['output']
- console.runCmd("umount /mnt/hda1")
-
- block_detach(domain, "hda1")
- run = console.runCmd("cat /proc/partitions")
- if re.search("hda1", run["output"]):
- FAIL("Failed to dettach block device: /proc/partitions still showing that!")
+ block_attach(domain, "phy:ram1", "xvda1")
+ run = console.runCmd("cat /proc/partitions")
+ if not re.search("xvda1", run["output"]):
+ FAIL("Failed to attach block device: /proc/partitions does not show that!")
+
+ console.runCmd("mkdir -p /mnt/xvda1; mount /dev/xvda1 /mnt/xvda1")
+
+ if i:
+ run = console.runCmd("cat /mnt/xvda1/myfile | grep %s" % (i-1))
+ if run['return']:
+ FAIL("File created was lost or not updated!")
+
+ console.runCmd("echo \"%s\" > /mnt/xvda1/myfile" % i)
+ run = console.runCmd("cat /mnt/xvda1/myfile")
+ print run['output']
+ console.runCmd("umount /mnt/xvda1")
+
+ block_detach(domain, "xvda1")
+ run = console.runCmd("cat /proc/partitions")
+ if re.search("xvda1", run["output"]):
+ FAIL("Failed to dettach block device: /proc/partitions still showing that!")
# Close the console
domain.closeConsole()
diff -r 6186ec41fc18 -r 4b13f1fdba2d tools/xm-test/tests/block-create/10_block_attach_dettach_multiple_devices.py
--- a/tools/xm-test/tests/block-create/10_block_attach_dettach_multiple_devices.py Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/10_block_attach_dettach_multiple_devices.py Thu Oct 26 18:57:46 2006 +1000
@@ -15,7 +15,7 @@ def availableRamdisks():
def availableRamdisks():
i = 0
while os.access("/dev/ram%d" % i, os.F_OK ):
- i += 1
+ i += 1
return i
@@ -36,7 +36,7 @@ def detach(devname):
return -2, "Failed to detach block device: /proc/partitions still showing that!"
return 0, None
-
+
if ENABLE_HVM_SUPPORT:
SKIP("Block-attach not supported for HVM domains")
@@ -69,22 +69,22 @@ while i < ramdisks or devices:
op = random.randint(0,1) # 1 = attach, 0 = detach
if (not devices or op) and i < ramdisks:
i += 1
- devname = "/dev/hda%d" % i
- phy = "/dev/ram%d" % i
- print "Attaching %s to %s" % (devname, phy)
- status, msg = attach( phy, devname )
- if status:
- FAIL(msg)
- else:
- devices.append(devname)
+ devname = "/dev/xvda%d" % i
+ phy = "/dev/ram%d" % i
+ print "Attaching %s to %s" % (devname, phy)
+ status, msg = attach( phy, devname )
+ if status:
+ FAIL(msg)
+ else:
+ devices.append(devname)
elif devices:
devname = random.choice(devices)
- devices.remove(devname)
- print "Detaching %s" % devname
- status, msg = detach(devname)
- if status:
- FAIL(msg)
+ devices.remove(devname)
+ print "Detaching %s" % devname
+ status, msg = detach(devname)
+ if status:
+ FAIL(msg)
# Close the console
domain.closeConsole()
diff -r 6186ec41fc18 -r 4b13f1fdba2d tools/xm-test/tests/block-create/11_block_attach_shared_dom0.py
--- a/tools/xm-test/tests/block-create/11_block_attach_shared_dom0.py Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/11_block_attach_shared_dom0.py Thu Oct 26 18:57:46 2006 +1000
@@ -24,7 +24,7 @@ if s != 0:
# Now try to start a DomU with write access to /dev/ram0
-config = {"disk":"phy:/dev/ram0,hda1,w"}
+config = {"disk":"phy:/dev/ram0,xvda1,w"}
domain = XmTestDomain(extraConfig=config);
diff -r 6186ec41fc18 -r 4b13f1fdba2d tools/xm-test/tests/block-create/12_block_attach_shared_domU.py
--- a/tools/xm-test/tests/block-create/12_block_attach_shared_domU.py Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/12_block_attach_shared_domU.py Thu Oct 26 18:57:46 2006 +1000
@@ -8,7 +8,7 @@ if ENABLE_HVM_SUPPORT:
if ENABLE_HVM_SUPPORT:
SKIP("Block-attach not supported for HVM domains")
-config = {"disk":"phy:/dev/ram0,hda1,w"}
+config = {"disk":"phy:/dev/ram0,xvda1,w"}
dom1 = XmTestDomain(extraConfig=config)
dom2 = XmTestDomain(dom1.getName() + "-2",
diff -r 6186ec41fc18 -r 4b13f1fdba2d tools/xm-test/tests/block-destroy/01_block-destroy_btblock_pos.py
--- a/tools/xm-test/tests/block-destroy/01_block-destroy_btblock_pos.py Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-destroy/01_block-destroy_btblock_pos.py Thu Oct 26 18:57:46 2006 +1000
@@ -9,7 +9,7 @@ if ENABLE_HVM_SUPPORT:
if ENABLE_HVM_SUPPORT:
SKIP("Block-detach not supported for HVM domains")
-config = {"disk":"phy:/dev/ram0,hda1,w"}
+config = {"disk":"phy:/dev/ram0,xvda1,w"}
domain = XmTestDomain(extraConfig=config)
try:
@@ -21,7 +21,7 @@ except DomainError, e:
try:
console.setHistorySaveCmds(value=True)
- run = console.runCmd("cat /proc/partitions | grep hda1")
+ run = console.runCmd("cat /proc/partitions | grep xvda1")
run2 = console.runCmd("cat /proc/partitions")
except ConsoleError, e:
FAIL(str(e))
@@ -29,10 +29,10 @@ if run["return"] != 0:
if run["return"] != 0:
FAIL("block device isn't attached; can't detach!")
-block_detach(domain, "hda1")
+block_detach(domain, "xvda1")
try:
- run = console.runCmd("cat /proc/partitions | grep hda1")
+ run = console.runCmd("cat /proc/partitions | grep xvda1")
except ConsoleError, e:
saveLog(console.getHistory())
FAIL(str(e))
diff -r 6186ec41fc18 -r 4b13f1fdba2d tools/xm-test/tests/block-destroy/02_block-destroy_rtblock_pos.py
--- a/tools/xm-test/tests/block-destroy/02_block-destroy_rtblock_pos.py Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-destroy/02_block-destroy_rtblock_pos.py Thu Oct 26 18:57:46 2006 +1000
@@ -18,9 +18,9 @@ except DomainError, e:
print e.extra
FAIL("Unable to create domain")
-block_attach(domain, "phy:/dev/ram0", "hda1")
+block_attach(domain, "phy:/dev/ram0", "xvda1")
try:
- run = console.runCmd("cat /proc/partitions | grep hda1")
+ run = console.runCmd("cat /proc/partitions | grep xvda1")
except ConsoleError, e:
saveLog(console.getHistory())
FAIL(str(e))
@@ -28,9 +28,9 @@ if run["return"] != 0:
if run["return"] != 0:
FAIL("Failed to verify that block dev is attached")
-block_detach(domain, "hda1")
+block_detach(domain, "xvda1")
try:
- run = console.runCmd("cat /proc/partitions | grep hda1")
+ run = console.runCmd("cat /proc/partitions | grep xvda1")
except ConsoleError, e:
saveLog(console.getHistory())
FAIL(str(e))
diff -r 6186ec41fc18 -r 4b13f1fdba2d tools/xm-test/tests/block-destroy/04_block-destroy_nonattached_neg.py
--- a/tools/xm-test/tests/block-destroy/04_block-destroy_nonattached_neg.py Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-destroy/04_block-destroy_nonattached_neg.py Thu Oct 26 18:57:46 2006 +1000
@@ -19,7 +19,7 @@ except DomainError, e:
print e.extra
FAIL("Unable to create domain")
-status, output = traceCommand("xm block-detach %s sda1" % domain.getId())
+status, output = traceCommand("xm block-detach %s xvda1" % domain.getId())
eyecatcher1 = "Error:"
eyecatcher2 = "Traceback"
diff -r 6186ec41fc18 -r 4b13f1fdba2d tools/xm-test/tests/block-destroy/05_block-destroy_byname_pos.py
--- a/tools/xm-test/tests/block-destroy/05_block-destroy_byname_pos.py Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-destroy/05_block-destroy_byname_pos.py Thu Oct 26 18:57:46 2006 +1000
@@ -9,7 +9,7 @@ if ENABLE_HVM_SUPPORT:
if ENABLE_HVM_SUPPORT:
SKIP("Block-detach not supported for HVM domains")
-config = {"disk":"phy:/dev/ram0,hda1,w"}
+config = {"disk":"phy:/dev/ram0,xvda1,w"}
domain = XmTestDomain(extraConfig=config)
try:
@@ -20,7 +20,7 @@ except DomainError, e:
FAIL("Unable to create domain")
try:
- run = console.runCmd("cat /proc/partitions | grep hda1")
+ run = console.runCmd("cat /proc/partitions | grep xvda1")
run2 = console.runCmd("cat /proc/partitions")
except ConsoleError, e:
FAIL(str(e))
@@ -28,10 +28,10 @@ if run["return"] != 0:
if run["return"] != 0:
FAIL("block device isn't attached; can't detach!")
-block_detach(domain, "hda1")
+block_detach(domain, "xvda1")
try:
- run = console.runCmd("cat /proc/partitions | grep hda1")
+ run = console.runCmd("cat /proc/partitions | grep xvda1")
except ConsoleError, e:
saveLog(console.getHistory())
FAIL(str(e))
diff -r 6186ec41fc18 -r 4b13f1fdba2d tools/xm-test/tests/block-destroy/06_block-destroy_check_list_pos.py
--- a/tools/xm-test/tests/block-destroy/06_block-destroy_check_list_pos.py Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-destroy/06_block-destroy_check_list_pos.py Thu Oct 26 18:57:46 2006 +1000
@@ -12,7 +12,7 @@ def checkXmLongList(domain):
s, o = traceCommand("xm list --long %s" % domain.getName())
if s != 0:
FAIL("xm list --long <dom> failed")
- if re.search("hda1", o):
+ if re.search("xvda1", o):
return True
else:
return False
@@ -27,12 +27,12 @@ except DomainError,e:
except DomainError,e:
FAIL(str(e))
-block_attach(domain, "phy:/dev/ram0", "hda1")
+block_attach(domain, "phy:/dev/ram0", "xvda1")
if not checkXmLongList(domain):
- FAIL("xm long list does not show that hda1 was attached")
+ FAIL("xm long list does not show that xvda1 was attached")
-block_detach(domain, "hda1")
+block_detach(domain, "xvda1")
if checkXmLongList(domain):
- FAIL("xm long list does not show that hda1 was removed")
+ FAIL("xm long list does not show that xvda1 was removed")
diff -r 6186ec41fc18 -r 4b13f1fdba2d tools/xm-test/tests/block-integrity/01_block_device_read_verify.py
--- a/tools/xm-test/tests/block-integrity/01_block_device_read_verify.py Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-integrity/01_block_device_read_verify.py Thu Oct 26 18:57:46 2006 +1000
@@ -33,10 +33,10 @@ s, o = traceCommand("md5sum /dev/ram1")
dom0_md5sum_match = re.search(r"^[\dA-Fa-f]{32}", o, re.M)
-block_attach(domain, "phy:ram1", "hda1")
+block_attach(domain, "phy:ram1", "xvda1")
try:
- run = console.runCmd("md5sum /dev/hda1")
+ run = console.runCmd("md5sum /dev/xvda1")
except ConsoleError, e:
FAIL(str(e))
diff -r 6186ec41fc18 -r 4b13f1fdba2d tools/xm-test/tests/block-integrity/02_block_device_write_verify.py
--- a/tools/xm-test/tests/block-integrity/02_block_device_write_verify.py Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-integrity/02_block_device_write_verify.py Thu Oct 26 18:57:46 2006 +1000
@@ -28,12 +28,12 @@ except DomainError, e:
console.setHistorySaveCmds(value=True)
-block_attach(domain, "phy:ram1", "hda1")
+block_attach(domain, "phy:ram1", "xvda1")
console.setTimeout(120)
try:
- run = console.runCmd("dd if=/dev/urandom bs=512 count=`cat /sys/block/hda1/size` | tee /dev/hda1 | md5sum")
+ run = console.runCmd("dd if=/dev/urandom bs=512 count=`cat /sys/block/xvda1/size` | tee /dev/xvda1 | md5sum")
except ConsoleError, e:
FAIL(str(e))
diff -r 6186ec41fc18 -r 4b13f1fdba2d tools/xm-test/tests/block-list/01_block-list_pos.py
--- a/tools/xm-test/tests/block-list/01_block-list_pos.py Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-list/01_block-list_pos.py Thu Oct 26 18:57:46 2006 +1000
@@ -11,7 +11,7 @@ if ENABLE_HVM_SUPPORT:
if ENABLE_HVM_SUPPORT:
SKIP("Block-list not supported for HVM domains")
-config = {"disk":"phy:/dev/ram0,hda1,w"}
+config = {"disk":"phy:/dev/ram0,xvda1,w"}
domain = XmTestDomain(extraConfig=config)
try:
@@ -22,7 +22,7 @@ except DomainError, e:
FAIL("Unable to create domain")
status, output = traceCommand("xm block-list %s" % domain.getId())
-eyecatcher = "769"
+eyecatcher = "51713"
where = output.find(eyecatcher)
if status != 0:
FAIL("xm block-list returned bad status, expected 0, status is %i" % status)
@@ -31,7 +31,7 @@ elif where < 0:
#Verify the block device on DomainU
try:
- run = console.runCmd("cat /proc/partitions | grep hda1")
+ run = console.runCmd("cat /proc/partitions | grep xvda1")
except ConsoleError, e:
saveLog(console.getHistory())
FAIL(str(e))
diff -r 6186ec41fc18 -r 4b13f1fdba2d tools/xm-test/tests/block-list/02_block-list_attachbd_pos.py
--- a/tools/xm-test/tests/block-list/02_block-list_attachbd_pos.py Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-list/02_block-list_attachbd_pos.py Thu Oct 26 18:57:46 2006 +1000
@@ -22,11 +22,11 @@ except DomainError, e:
FAIL("Unable to create domain")
#Attach one virtual block device to domainU
-block_attach(domain, "phy:/dev/ram0", "hda1")
+block_attach(domain, "phy:/dev/ram0", "xvda1")
#Verify block-list on Domain0
status, output = traceCommand("xm block-list %s" % domain.getId())
-eyecatcher = "769"
+eyecatcher = "51713"
where = output.find(eyecatcher)
if status != 0:
FAIL("xm block-list returned bad status, expected 0, status is %i" % status)
@@ -35,7 +35,7 @@ elif where < 0 :
#Verify attached block device on DomainU
try:
- run = console.runCmd("cat /proc/partitions | grep hda1")
+ run = console.runCmd("cat /proc/partitions | grep xvda1")
except ConsoleError, e:
saveLog(console.getHistory())
FAIL(str(e))
diff -r 6186ec41fc18 -r 4b13f1fdba2d tools/xm-test/tests/block-list/03_block-list_anotherbd_pos.py
--- a/tools/xm-test/tests/block-list/03_block-list_anotherbd_pos.py Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-list/03_block-list_anotherbd_pos.py Thu Oct 26 18:57:46 2006 +1000
@@ -11,7 +11,7 @@ if ENABLE_HVM_SUPPORT:
if ENABLE_HVM_SUPPORT:
SKIP("Block-list not supported for HVM domains")
-config = {"disk":"phy:/dev/ram0,hda1,w"}
+config = {"disk":"phy:/dev/ram0,xvda1,w"}
domain = XmTestDomain(extraConfig=config)
try:
@@ -26,14 +26,14 @@ if status != 0:
FAIL("Fail to list block device")
#Add another virtual block device to the domain
-status, output = traceCommand("xm block-attach %s phy:/dev/ram1 hda2 w" % domain.getId())
+status, output = traceCommand("xm block-attach %s phy:/dev/ram1 xvda2 w" % domain.getId())
if status != 0:
FAIL("Fail to attach block device")
#Verify block-list on Domain0
status, output = traceCommand("xm block-list %s" % domain.getId())
-eyecatcher1 = "769"
-eyecatcher2 = "770"
+eyecatcher1 = "51713"
+eyecatcher2 = "51714"
where1 = output.find(eyecatcher1)
where2 = output.find(eyecatcher2)
if status != 0:
@@ -43,7 +43,7 @@ elif (where1 < 0) and (where2 < 0):
#Verify attached block device on DomainU
try:
- run = console.runCmd("cat /proc/partitions | grep hda1;cat /proc/partitions | grep hda2")
+ run = console.runCmd("cat /proc/partitions | grep xvda1;cat /proc/partitions | grep xvda2")
except ConsoleError, e:
saveLog(console.getHistory())
FAIL(str(e))
diff -r 6186ec41fc18 -r 4b13f1fdba2d tools/xm-test/tests/block-list/06_block-list_checkremove_pos.py
--- a/tools/xm-test/tests/block-list/06_block-list_checkremove_pos.py Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-list/06_block-list_checkremove_pos.py Thu Oct 26 18:57:46 2006 +1000
@@ -22,39 +22,39 @@ if o:
if o:
FAIL("block-list without devices reported something!")
-block_attach(domain, "phy:/dev/ram0", "hda1")
+block_attach(domain, "phy:/dev/ram0", "xvda1")
s, o = traceCommand("xm block-list %s" % domain.getName())
if s != 0:
FAIL("block-list failed")
-if o.find("769") == -1:
+if o.find("51713") == -1:
FAIL("block-list didn't show the block device I just attached!")
-block_attach(domain, "phy:/dev/ram1", "hda2")
+block_attach(domain, "phy:/dev/ram1", "xvda2")
s, o = traceCommand("xm block-list %s" % domain.getName())
if s != 0:
FAIL("block-list failed")
-if o.find("770") == -1:
+if o.find("51714") == -1:
FAIL("block-list didn't show the other block device I just attached!")
-block_detach(domain, "hda1")
+block_detach(domain, "xvda1")
s, o = traceCommand("xm block-list %s" % domain.getName())
if s != 0:
FAIL("block-list failed after detaching a device")
-if o.find("769") != -1:
- FAIL("hda1 still shown in block-list after detach!")
-if o.find("770") == -1:
- FAIL("hda2 not shown after detach of hda1!")
+if o.find("51713") != -1:
+ FAIL("xvda1 still shown in block-list after detach!")
+if o.find("51714") == -1:
+ FAIL("xvda2 not shown after detach of xvda1!")
-block_detach(domain, "hda2")
+block_detach(domain, "xvda2")
s, o = traceCommand("xm block-list %s" % domain.getName())
if s != 0:
FAIL("block-list failed after detaching another device")
-if o.find("770") != -1:
- FAIL("hda2 still shown in block-list after detach!")
+if o.find("51714") != -1:
+ FAIL("xvda2 still shown in block-list after detach!")
if o:
FAIL("block-list still shows something after all devices detached!")
next prev parent reply other threads:[~2006-10-30 5:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-30 5:38 [PATCH 0/3][TOOLS][XM-TEST] Update block tests to use xvd rather than SCSI or IDE Tony Breeds
2006-10-30 5:38 ` Tony Breeds [this message]
2006-10-30 5:39 ` [PATCH 2/3][TOOLS][XM-TEST] Add xvd devices to the initrd Tony Breeds
2006-10-30 5:39 ` [PATCH 3/3][TOOLS][XM-TEST] Bump xm-test version to 1.1 to accommodate new devices Tony Breeds
2006-11-01 15:53 ` [PATCH 0/3][TOOLS][XM-TEST] Update block tests to use xvd rather than SCSI or IDE Ewan Mellor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4b13f1fdba2dece28f01.1162186739@localhost.localdomain \
--to=tony@bakeyournoodle.com \
--cc=xen-devel@lists.xensource.com \
--cc=xen-ppc-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.