From mboxrd@z Thu Jan 1 00:00:00 1970 From: bugtrack@alsa-project.org Subject: [ALSA - driver 0001347]: unable to configure sound card Date: Thu, 13 Apr 2006 18:08:35 +0200 Message-ID: <4c7fc6ef575ff30578d2bfae129eaaba@bugtrack.alsa-project.org> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: Received: from bugtrack.alsa-project.org (gate.perex.cz [85.132.177.35]) by alsa.jcu.cz (ALSA's E-mail Delivery System) with ESMTP id B24A2C9 for ; Thu, 13 Apr 2006 18:08:35 +0200 (MEST) Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org The following issue has been CLOSED ====================================================================== ====================================================================== Reported By: CptS Assigned To: tiwai ====================================================================== Project: ALSA - driver Issue ID: 1347 Category: PCI - nm256 Reproducibility: always Severity: major Priority: normal Status: closed Distribution: Knoppix 4.0 Kernel Version: 2.6.11 Resolution: open Fixed in Version: ====================================================================== Date Submitted: 08-17-2005 11:05 CEST Last Modified: 04-13-2006 18:08 CEST ====================================================================== Summary: unable to configure sound card Description: I'm having problems configuring my sound card with alsa, here are the details: the sound card is NeoMagic 256AV (NM2200) located onboard a Compaq Presario 1920. I'm currently running Knoppix 4.0 hdd installed (kernel 2.6) here's lspci -vv outputs on the cards: 0000:01:00.1 Multimedia audio controller: Neomagic Corporation NM2200 [MagicMedia 256AV Audio] (rev 20) Subsystem: Compaq Computer Corporation MagicMedia 256AV Audio Device on Durango Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- I wouldn't have addressed you unless I've already tried everything: I've tried the solution of the same problem regarding HP Omni 4150 with the same card. I used alsaconf and it tried to load snd-nm256, after loading it crashed, dmesg suggested loading it with force_ac97=1 switch but once i did it the system crashed (on 3 differet linux installations) I did a legacy scan using alsaconf for all legacy drivers. I 'modprobe'ed for hours on every imaginable option (ad1848, sb, cs423x, etc..) I've edited the modules.conf and manually defined the dma and irq I removed alsa completly and re-install it. I had debian with 2.4 kernel installed and i've upgraded to 2.6 I changed the distro from debian to Knoppix (kinda same thing but...) anyway, you get the point.. can you please assist??I'm having problems configuring my sound card with alsa, here are the details: the sound card is NeoMagic 256AV (NM2200) located onboard a Compaq Presario 1920. I'm currently running Knoppix 4.0 hdd installed (kernel 2.6) here's lspci -vv outputs on the cards: 0000:01:00.1 Multimedia audio controller: Neomagic Corporation NM2200 [MagicMedia 256AV Audio] (rev 20) Subsystem: Compaq Computer Corporation MagicMedia 256AV Audio Device on Durango Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- I wouldn't have addressed you unless I've already tried everything: I've tried the solution of the same problem regarding HP Omni 4150 with the same card. I used alsaconf and it tried to load snd-nm256, after loading it crashed, dmesg suggested loading it with force_ac97=1 switch but once i did it the system crashed (on 3 differet linux installations) I did a legacy scan using alsaconf for all legacy drivers. I 'modprobe'ed for hours on every imaginable option (ad1848, sb, cs423x, etc..) I've edited the modules.conf and manually defined the dma and irq I removed alsa completly and re-install it. I had debian with 2.4 kernel installed and i've upgraded to 2.6 I changed the distro from debian to Knoppix (kinda same thing but...) anyway, you get the point.. can you please assist??I'm having problems configuring my sound card with alsa, here are the details: the sound card is NeoMagic 256AV (NM2200) located onboard a Compaq Presario 1920. I'm currently running Knoppix 4.0 hdd installed (kernel 2.6) here's lspci -vv outputs on the cards: 0000:01:00.1 Multimedia audio controller: Neomagic Corporation NM2200 [MagicMedia 256AV Audio] (rev 20) Subsystem: Compaq Computer Corporation MagicMedia 256AV Audio Device on Durango Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- I wouldn't have addressed you unless I've already tried everything: I've tried the solution of the same problem regarding HP Omni 4150 with the same card. I used alsaconf and it tried to load snd-nm256, after loading it crashed, dmesg suggested loading it with force_ac97=1 switch but once i did it the system crashed (on 3 differet linux installations) I did a legacy scan using alsaconf for all legacy drivers. I 'modprobe'ed for hours on every imaginable option (ad1848, sb, cs423x, etc..) I've edited the modules.conf and manually defined the dma and irq I removed alsa completly and re-install it. I had debian with 2.4 kernel installed and i've upgraded to 2.6 I changed the distro from debian to Knoppix (kinda same thing but...) anyway, you get the point.. can you please assist?? ====================================================================== ---------------------------------------------------------------------- CptS - 04-13-06 17:42 ---------------------------------------------------------------------- I didn't try with alsa cvs, but the hardware on that laptop is quite old so I won't upgrade to newer versions on debian so i guess OSS will be just fine for what it's used for. thanks anyways. Shay. p.s. this thread is pretty old, i've been using the laptop with the oss coniguration and kernel 2.4 for a long time now. ---------------------------------------------------------------------- rlrevell - 04-13-06 18:08 ---------------------------------------------------------------------- AFAICT there's no bug Issue History Date Modified Username Field Change ====================================================================== 08-17-05 11:05 CptS New Issue 08-17-05 11:05 CptS Distribution => Knoppix 4.0 08-17-05 11:05 CptS Kernel Version => 2.6.11 08-17-05 11:24 CptS Note Added: 0005835 08-20-05 19:48 CptS Issue Monitored: CptS 08-20-05 19:50 CptS Note Added: 0005883 08-20-05 20:32 rlrevell Note Added: 0005884 08-20-05 20:37 rlrevell Note Added: 0005885 08-22-05 22:00 CptS Note Added: 0005901 08-23-05 16:40 tiwai Note Added: 0005908 09-07-05 21:33 dcooppan Note Added: 0006066 03-16-06 08:01 rlrevell Note Added: 0008588 03-19-06 23:42 CptS Note Added: 0008699 03-20-06 01:26 rlrevell Note Added: 0008701 04-13-06 17:42 CptS Note Added: 0009264 04-13-06 18:08 rlrevell Status assigned => closed 04-13-06 18:08 rlrevell Note Added: 0009266 ====================================================================== ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642