From: "Luck, Tony" <tony.luck@intel.com>
To: linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org
Cc: ying.huang@intel.com
Subject: [RFC] persistent store -x86 platform piece (version 3) (part 2 of 2)
Date: Mon, 06 Dec 2010 10:31:08 -0800 [thread overview]
Message-ID: <4cfd2bec25858dc899@agluck-desktop.sc.intel.com> (raw)
Here are the changes to ERST to use the persistent store.
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
diff --git a/drivers/acpi/apei/Kconfig b/drivers/acpi/apei/Kconfig
index fca34cc..e91680c 100644
--- a/drivers/acpi/apei/Kconfig
+++ b/drivers/acpi/apei/Kconfig
@@ -1,5 +1,6 @@
config ACPI_APEI
bool "ACPI Platform Error Interface (APEI)"
+ select PSTORE
depends on X86
help
APEI allows to report errors (for example from the chipset)
diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c
index 1211c03..35e0961 100644
--- a/drivers/acpi/apei/erst.c
+++ b/drivers/acpi/apei/erst.c
@@ -34,6 +34,7 @@
#include <linux/cper.h>
#include <linux/nmi.h>
#include <linux/hardirq.h>
+#include <linux/pstore.h>
#include <acpi/apei.h>
#include "apei-internal.h"
@@ -781,6 +782,122 @@ static int erst_check_table(struct acpi_table_erst *erst_tab)
return 0;
}
+static int erst_reader(u64 *id, int *type, size_t *size, struct timespec *time);
+static int erst_writer(int type, size_t size);
+
+static struct pstore_info erst_info = {
+ .owner = THIS_MODULE,
+ .name = "erst",
+ .read = erst_reader,
+ .write = erst_writer,
+ .erase = erst_clear
+};
+
+#define CPER_CREATOR_PSTORE \
+ UUID_LE(0x75a574e3, 0x5052, 0x4b29, 0x8a, 0x8e, 0xbe, 0x2c, \
+ 0x64, 0x90, 0xb8, 0x9d)
+#define CPER_SECTION_TYPE_DMESG \
+ UUID_LE(0xc197e04e, 0xd545, 0x4a70, 0x9c, 0x17, 0xa5, 0x54, \
+ 0x94, 0x19, 0xeb, 0x12)
+#define CPER_SECTION_TYPE_MCE \
+ UUID_LE(0xfe08ffbe, 0x95e4, 0x4be7, 0xbc, 0x73, 0x40, 0x96, \
+ 0x04, 0x4a, 0x38, 0xfc)
+
+struct cper_pstore_record {
+ struct cper_record_header hdr;
+ struct cper_section_descriptor sec_hdr;
+ char data[];
+} __packed;
+
+static int erst_reader(u64 *id, int *type, size_t *size, struct timespec *time)
+{
+ int rc;
+ ssize_t len;
+ unsigned long flags;
+ u64 record_id;
+ struct cper_pstore_record *rcd = (struct cper_pstore_record *)
+ (erst_info.buf - sizeof(*rcd));
+
+ if (erst_disable)
+ return -ENODEV;
+
+ spin_lock_irqsave(&erst_lock, flags);
+ rc = __erst_get_next_record_id(&record_id);
+ if (rc) {
+ spin_unlock_irqrestore(&erst_lock, flags);
+ return rc;
+ }
+ /* no more record */
+ if (record_id == APEI_ERST_INVALID_RECORD_ID) {
+ spin_unlock_irqrestore(&erst_lock, flags);
+ return 0;
+ }
+
+ len = __erst_read(record_id, &rcd->hdr, sizeof(*rcd) +
+ erst_erange.size);
+ spin_unlock_irqrestore(&erst_lock, flags);
+
+ *id = record_id;
+ if (uuid_le_cmp(rcd->sec_hdr.section_type,
+ CPER_SECTION_TYPE_DMESG) == 0)
+ *type = PSTORE_TYPE_DMESG;
+ else if (uuid_le_cmp(rcd->sec_hdr.section_type,
+ CPER_SECTION_TYPE_MCE) == 0)
+ *type = PSTORE_TYPE_MCE;
+ else
+ *type = PSTORE_TYPE_MCE + 1;
+ *size = len - sizeof(*rcd);
+
+ if (rcd->hdr.validation_bits & CPER_VALID_TIMESTAMP)
+ time->tv_sec = rcd->hdr.timestamp;
+ else
+ time->tv_sec = 0;
+ time->tv_nsec = 0;
+
+ return len;
+}
+
+static int erst_writer(int type, size_t size)
+{
+ struct cper_pstore_record *rcd = (struct cper_pstore_record *)
+ (erst_info.buf - sizeof(*rcd));
+
+ memset(rcd, 0, sizeof(*rcd));
+ memcpy(rcd->hdr.signature, CPER_SIG_RECORD, CPER_SIG_SIZE);
+ rcd->hdr.revision = CPER_RECORD_REV;
+ rcd->hdr.signature_end = CPER_SIG_END;
+ rcd->hdr.section_count = 1;
+ rcd->hdr.error_severity = CPER_SEV_FATAL;
+ /* timestamp valid. platform_id, partition_id are invalid */
+ rcd->hdr.validation_bits = CPER_VALID_TIMESTAMP;
+ rcd->hdr.timestamp = get_seconds();
+ rcd->hdr.record_length = sizeof(*rcd) + size;
+ rcd->hdr.creator_id = CPER_CREATOR_PSTORE;
+ rcd->hdr.notification_type = CPER_NOTIFY_MCE;
+ rcd->hdr.record_id = cper_next_record_id();
+ rcd->hdr.flags = CPER_HW_ERROR_FLAGS_PREVERR;
+
+ rcd->sec_hdr.section_offset = sizeof(*rcd);
+ rcd->sec_hdr.section_length = size;
+ rcd->sec_hdr.revision = CPER_SEC_REV;
+ /* fru_id and fru_text is invalid */
+ rcd->sec_hdr.validation_bits = 0;
+ rcd->sec_hdr.flags = CPER_SEC_PRIMARY;
+ switch (type) {
+ case PSTORE_TYPE_DMESG:
+ rcd->sec_hdr.section_type = CPER_SECTION_TYPE_DMESG;
+ break;
+ case PSTORE_TYPE_MCE:
+ rcd->sec_hdr.section_type = CPER_SECTION_TYPE_MCE;
+ break;
+ default:
+ return -EINVAL;
+ }
+ rcd->sec_hdr.section_severity = CPER_SEV_FATAL;
+
+ return erst_write(&rcd->hdr);
+}
+
static int __init erst_init(void)
{
int rc = 0;
@@ -788,6 +905,7 @@ static int __init erst_init(void)
struct apei_exec_context ctx;
struct apei_resources erst_resources;
struct resource *r;
+ char *buf;
if (acpi_disabled)
goto err;
@@ -854,6 +972,18 @@ static int __init erst_init(void)
if (!erst_erange.vaddr)
goto err_release_erange;
+ buf = kmalloc(erst_erange.size, GFP_KERNEL);
+ mutex_init(&erst_info.mutex);
+ if (buf) {
+ erst_info.buf = buf + sizeof(struct cper_pstore_record);
+ erst_info.bufsize = erst_erange.size -
+ sizeof(struct cper_pstore_record);
+ if (pstore_register(&erst_info)) {
+ pr_info(ERST_PFX "Could not register with persistent store\n");
+ kfree(buf);
+ }
+ }
+
pr_info(ERST_PFX
"Error Record Serialization Table (ERST) support is initialized.\n");
reply other threads:[~2010-12-06 18:31 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4cfd2bec25858dc899@agluck-desktop.sc.intel.com \
--to=tony.luck@intel.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ying.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.