Re: [Bluez-users] Error when compiling bluez-utils

[CoCozZ geek <cocozz@gmail.com>]

Yessssssss miracle :)

Cocozz cocozz # hcitool scan
Scanning ...
        00:0E:6D:85:74:7A       Nokia 6600

Lots lots lots lots lots of thanks !!!!

Have a very happy holidays ;=)))


On Sat, 25 Dec 2004 19:08:46 +0100, CoCozZ geek <cocozz@gmail.com> wrote:
> edit: oh ... yes im using an usb HUB. Ok wait I try to connect ir on
> another usb port
> 
> On Sat, 25 Dec 2004 19:08:30 +0100, CoCozZ geek <cocozz@gmail.com> wrote:
> > oh ... yes im using an usb. Ok wait I try to connect ir on another usb port
> >
> >
> > On Sat, 25 Dec 2004 18:58:49 +0100, Marcel Holtmann <marcel@holtmann.org> wrote:
> > > Hi,
> > >
> > > > Cocozz cocozz # uname -r
> > > > 2.6.8-gentoo-r10
> > > >
> > > > Cocozz cocozz # cat /proc/bus/usb/devices
> > > >
> > > > T:  Bus=01 Lev=02 Prnt=05 Port=02 Cnt=01 Dev#=  6 Spd=12  MxCh= 0
> > > > D:  Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
> > > > P:  Vendor=0a12 ProdID=0001 Rev= 5.25
> > > > C:* #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr=  0mA
> > > > I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> > > > E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
> > > > E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > > > E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > > > I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> > > > E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> > > > E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> > > > I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> > > > E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> > > > E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> > > > I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> > > > E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> > > > E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> > > > I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> > > > E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> > > > E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> > > > I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> > > > E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> > > > E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> > > > I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> > > > E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> > > > E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> > > > I:  If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)
> > >
> > > I don't see any problem here and since this is a CSR dongle there
> > > shouldn't be a problem at all. These devices normally work. Maybe you
> > > need to change your USB devices a little bit. I heard of problems of
> > > some Bluetooth dongles behind a hub etc.
> > >
> > > Regards
> > >
> > > Marcel
> > >
> > > -------------------------------------------------------
> > > SF email is sponsored by - The IT Product Guide
> > > Read honest & candid reviews on hundreds of IT Products from real users.
> > > Discover which products truly live up to the hype. Start reading now.
> > > http://productguide.itmanagersjournal.com/
> > > _______________________________________________
> > > Bluez-users mailing list
> > > Bluez-users@lists.sourceforge.net
> > > https://lists.sourceforge.net/lists/listinfo/bluez-users
> > >
> >
>


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users