Re: [PATCH] dt-bindings: usb: microchip,usb5744: Add support for configurable board reset delays

[Michal Simek <michal.simek@amd.com>]

On 6/5/25 20:29, Radhey Shyam Pandey wrote:
> Introduce 'reset-delay-us' and 'power-on-delay-us' properties. Default
> delays in datasheet are not good enough for Xilinx Kria KR260 Robotics
> Starter Kit (and others) so there is a need to program board specific
> reset and power on delay via DT.
> 
> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
> ---
> Taken reference from mdio.yaml[1]
> [1]: Documentation/devicetree/bindings/net/mdio.yaml
> ---
>   .../devicetree/bindings/usb/microchip,usb5744.yaml   | 12 ++++++++++++
>   1 file changed, 12 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
> index c68c04da3399..94a2bebd32da 100644
> --- a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
> +++ b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
> @@ -52,6 +52,16 @@ properties:
>       description:
>         phandle of an usb hub connected via i2c bus.
>   
> +  reset-delay-us:
> +    description:
> +      RESET pulse width in microseconds.
> +
> +  power-on-delay-us:
> +    description:
> +      Delay after power on in microseconds. USB5744 Hub requires some
> +      delay after reset to get to state when SMBus configuration
> +      data is going to be accepted.
> +
>   required:
>     - compatible
>     - reg
> @@ -69,6 +79,8 @@ allOf:
>           vdd2-supply: false
>           peer-hub: false
>           i2c-bus: false
> +        reset-delay-us: false
> +        power-on-delay-us: false
>       else:
>         $ref: /schemas/usb/usb-device.yaml
>   
> 
> base-commit: 4f27f06ec12190c7c62c722e99ab6243dea81a94

Acked-by: Michal Simek <michal.simek@amd.com>

Thanks,
Michal