From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] USB on mx53
Date: Mon, 16 Jul 2012 08:59:56 +0200 [thread overview]
Message-ID: <5003BBEC.7090102@denx.de> (raw)
In-Reply-To: <1SqelF-0007yJ-Uw@wolf.netmodule.com>
On 16/07/2012 08:26, Andreas Salvisberg wrote:
> Dear Mr. Babic
>
>
Hi,
please use the U-Boot ML for U-Boot related questions. You will find
much more help than asking to a single person and your questions can
interest many other people.
>
> I try to run a USB Host on a i.MX53 Board. Unfortunately USB does not
> work. I got the following error message: ?EHCI timed out on TD -
> token=0x80008c80?.
>
>
>
> On a discussion on GMANE I found a post of you, that you run USB on a
> mx53_loco.
>
> Can you tell me on which source base you are working?
I tested when patches were submitted on a MX53QSB. I have tried now, and
USB seems working.
U-Boot 2011.12-00518-gf56cab3 (Mar 23 2012 - 13:03:38)
CPU: Freescale i.MX53 rev2.1 at 800 MHz
Reset cause: POR
Board: MX53 LOCO
DRAM: 1 GiB
WARNING: Caches not enabled
MMC: FSL_SDHC: 0, FSL_SDHC: 1
In: serial
Out: serial
Err: serial
Net: FEC
Hit any key to stop autoboot: 0
MX53LOCO U-Boot > usb start
(Re)start USB...
USB: Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
scanning bus for ethernet devices... 0 Ethernet Device(s) found
However, with last TOT I get errors:
ERROR: v7_dcache_inval_range - stop address is not aligned - 0xaf56b960
and of course it is not working. Some "git bisect" is needed here...
>
> Do you use the UBoot sources from Freescale?
Absolutely not, only mainline U-Boot.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
parent reply other threads:[~2012-07-16 6:59 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <1SqelF-0007yJ-Uw@wolf.netmodule.com>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5003BBEC.7090102@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.