From: Archit Taneja <a0393947@ti.com>
To: "linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>
Subject: NFS mount issue with OMAP4 on linux-next
Date: Tue, 24 Jul 2012 11:37:23 +0530 [thread overview]
Message-ID: <500E3B9B.9080702@ti.com> (raw)
Hi,
I am not able to mount a filesyatem via NFS on OMAP4 SDP with the
current linux-next kernel. The same thing works fine with OMAP3 SDP.
Some more info:
- initramfs works fine with OMAP4 SDP.
- NFS mount on OMAP4 SDP works fine with mainline kernel.
- Logs below (No output on console after the last print, but console
takes input)
Thanks,
Archit
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Linux version 3.5.0-next-20120723 (a0393947@a0393947pc)
(gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #68 SMP Tue Jul 24
11:30:19 IST 2012
[ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7),
cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] Machine: OMAP4430 4430SDP board
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] OMAP4430 ES2.1
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c1526000 s12736 r8192
d15936 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 259840
[ 0.000000] Kernel command line: mem=1G console=ttyO2,115200n8
noinitrd root=/dev/nfs rw
nfsroot=172.24.137.248:/nfs-share/mnt/,nolock,tcp,rsize=2048,wsize=2048,tcp
ip=172.24.190.136 no_console_suspend
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Memory: 759MB 264MB = 1023MB total
[ 0.000000] Memory: 1025032k/1025032k available, 23544k reserved,
270336K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06ca0c4 (6921 kB)
[ 0.000000] .init : 0xc06cb000 - 0xc071a1c0 ( 317 kB)
[ 0.000000] .data : 0xc071c000 - 0xc07b8000 ( 624 kB)
[ 0.000000] .bss : 0xc07b8024 - 0xc0d1260c (5482 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:474
[ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for
dpll_mpu_m2_ck.
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] omap_hwmod: sys_32k_ck: missing clockdomain for sys_32k_ck.
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps
every 131071999ms
[ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat,
Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3695 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.000823] Calibrating delay loop... 2007.19 BogoMIPS (lpj=7839744)
[ 0.054565] pid_max: default: 32768 minimum: 301
[ 0.055084] Security Framework initialized
[ 0.055267] Mount-cache hash table entries: 512
[ 0.059051] CPU: Testing write buffer coherency: ok
[ 0.059936] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.060272] Setting up static identity map for 0x804f96a0 - 0x804f9710
[ 0.060363] L310 cache controller enabled
[ 0.060363] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000,
Cache size: 1048576 B
[ 0.063385] CPU1: Booted secondary processor
[ 0.130554] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.130615] CPU1: Unknown IPI message 0x0
[ 0.131103] Brought up 2 CPUs
[ 0.131103] SMP: Total of 2 processors activated (4022.78 BogoMIPS).
[ 0.139221] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
[ 0.143218] omap_hwmod: sl2if: cannot be enabled for reset (3)
[ 0.147216] omap_hwmod: mcpdm: cannot be enabled for reset (3)
[ 0.147338] omap_hwmod: cm_core_aon: cannot be enabled for reset (3)
[ 0.147369] omap_hwmod: cm_core: cannot be enabled for reset (3)
[ 0.151733] dummy:
[ 0.152709] NET: Registered protocol family 16
[ 0.154144] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.154571] GPMC revision 6.0
[ 0.154693] gpmc: irq-52 could not claim: err -22
[ 0.159576] OMAP GPIO hardware version 0.1
[ 0.166137] omap_mux_init: Add partition: #1: core, flags: 2
[ 0.167541] omap_mux_init: Add partition: #2: wkup, flags: 2
[ 0.171203] _omap_mux_get_by_name: Could not find signal
uart1_rx.uart1_rx
[ 0.171203] _omap_mux_get_by_name: Could not find signal
uart1_rx.uart1_rx
[ 0.217803] Error setting wl12xx data: -38
[ 0.223114] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1
watchpoint registers.
[ 0.223114] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.231445] OMAP DMA hardware revision 0.0
[ 0.258178] bio: create slab <bio-0> at 0
[ 0.259674] VBAT: 3750 mV
[ 0.260223] vwl1271: 1800 mV
[ 0.262603] SCSI subsystem initialized
[ 0.263702] usbcore: registered new interface driver usbfs
[ 0.263916] usbcore: registered new interface driver hub
[ 0.264221] usbcore: registered new device driver usb
[ 0.279205] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz
[ 0.281311] Skipping twl internal clock init and using bootloader
value (unknown osc rate)
[ 0.282257] twl 1-0048: PIH (irq 39) chaining IRQs 352..372
[ 0.283721] VUSB: 3300 mV normal standby
[ 0.284545] vdd_mpu: 500 <--> 1500 mV normal
[ 0.285400] vdd_iva: 500 <--> 1500 mV normal
[ 0.286224] vdd_core: 500 <--> 1500 mV normal
[ 0.287750] V1V8: 1800 mV normal standby
[ 0.288574] V2V1: 2100 mV normal standby
[ 0.289520] VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
[ 0.290710] VPP: 1800 <--> 2500 mV at 1900 mV normal standby
[ 0.291839] VUSIM: 1200 <--> 2900 mV at 1800 mV normal standby
[ 0.293090] VCXIO: 1800 mV normal standby
[ 0.293151] VCXIO: supplied by V2V1
[ 0.295013] VDAC: 1800 mV normal standby
[ 0.295043] VDAC: supplied by V2V1
[ 0.296447] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV normal standby
[ 0.297546] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
[ 0.298706] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
[ 0.300201] VANA: 2100 mV normal standby
[ 0.310333] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz
[ 0.325927] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 400 kHz
[ 0.341522] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz
[ 0.345489] Switching to clocksource 32k_counter
[ 0.404449] NET: Registered protocol family 2
[ 0.405761] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.407989] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
[ 0.423126] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.423431] TCP: reno registered
[ 0.423461] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 0.423706] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 0.424468] NET: Registered protocol family 1
[ 0.425262] RPC: Registered named UNIX socket transport module.
[ 0.425292] RPC: Registered udp transport module.
[ 0.425292] RPC: Registered tcp transport module.
[ 0.425292] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.425811] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.550140] bounce pool size: 64 pages
[ 0.550537] VFS: Disk quotas dquot_6.5.2
[ 0.550689] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.552185] NFS: Registering the id_resolver key type
[ 0.552490] Key type id_resolver registered
[ 0.552581] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red
Hat, Inc.
[ 0.552978] msgmni has been set to 1474
[ 0.554565] io scheduler noop registered
[ 0.554565] io scheduler deadline registered
[ 0.554626] io scheduler cfq registered (default)
[ 0.555755] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.558868] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a
OMAP UART0
[ 0.559814] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a
OMAP UART1
[ 0.560424] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a
OMAP UART2
[ 1.334014] console [ttyO2] enabled
[ 1.338409] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a
OMAP UART3
[ 1.360443] brd: module loaded
[ 1.372375] loop: module loaded
[ 1.378295] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.385589] OneNAND driver initializing
[ 1.391540] spi spi1.0: no RX DMA engine channel for McSPI
[ 1.397460] omap2_mcspi omap2_mcspi.1: can't setup spi1.0, status -11
[ 1.404296] omap2_mcspi omap2_mcspi.1: can't create new device for ks8851
[ 1.415222] usbcore: registered new interface driver asix
[ 1.421142] usbcore: registered new interface driver cdc_ether
[ 1.427490] usbcore: registered new interface driver smsc95xx
[ 1.433715] usbcore: registered new interface driver net1080
[ 1.439849] usbcore: registered new interface driver cdc_subset
[ 1.446228] usbcore: registered new interface driver zaurus
[ 1.452331] usbcore: registered new interface driver cdc_ncm
[ 1.459197] usbcore: registered new interface driver cdc_wdm
[ 1.465118] Initializing USB Mass Storage driver...
[ 1.470458] usbcore: registered new interface driver usb-storage
[ 1.476745] USB Mass Storage support registered.
[ 1.482116] usbcore: registered new interface driver libusual
[ 1.488403] usbcore: registered new interface driver usbtest
[ 1.495025] mousedev: PS/2 mouse device common for all mice
[ 1.503112] twl_rtc twl_rtc: Power up reset detected.
[ 1.509063] twl_rtc twl_rtc: Enabling TWL-RTC
[ 1.516632] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 1.523498] i2c /dev entries driver
[ 1.529113] Driver for 1-wire Dallas network protocol.
[ 1.536254] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout
60 sec
[ 1.545135] omap_hsmmc omap_hsmmc.1: Failed to get debounce clk
[ 1.551361] omap_hsmmc omap_hsmmc.1: unable to obtain RX DMA engine
channel 48
[ 1.559234] omap_hsmmc omap_hsmmc.0: Failed to get debounce clk
[ 1.565460] omap_hsmmc omap_hsmmc.0: unable to obtain RX DMA engine
channel 62
[ 1.573181] omap_hsmmc omap_hsmmc.4: Failed to get debounce clk
[ 1.579376] omap_hsmmc omap_hsmmc.4: unable to obtain RX DMA engine
channel 60
[ 1.588012] usbcore: registered new interface driver usbhid
[ 1.593841] usbhid: USB HID core driver
[ 1.597869] oprofile: hardware counters not available
[ 1.603118] oprofile: using timer interrupt.
[ 1.608032] TCP: cubic registered
[ 1.611511] Initializing XFRM netlink socket
[ 1.616027] NET: Registered protocol family 17
[ 1.620910] NET: Registered protocol family 15
[ 1.625793] Key type dns_resolver registered
[ 1.630371] VFP support v0.3: implementor 41 architecture 3 part 30
variant 9 rev 1
[ 1.643066] omap_vc_i2c_init: I2C config for vdd_iva does not match
other channels (0).
[ 1.651275] omap_vc_i2c_init: I2C config for vdd_mpu does not match
other channels (0).[ 1.660583] Power Management for TI OMAP4.
[ 1.664978] ThumbEE CPU extension supported.
[ 1.685333] clock: disabling unused clocks to save power
[ 1.693359] VANA: incomplete constraints, leaving on
[ 1.699554] VAUX1_6030: incomplete constraints, leaving on
[ 1.705627] VDAC: incomplete constraints, leaving on
[ 1.711791] VMMC: incomplete constraints, leaving on
[ 1.718444] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 1.727539] twl_rtc twl_rtc: setting system clock to 2000-01-01
00:00:00 UTC (946684800)
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2012-07-24 6:08 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-24 6:07 Archit Taneja [this message]
2012-07-24 6:18 ` NFS mount issue with OMAP4 on linux-next Archit Taneja
2012-07-24 6:53 ` S, Venkatraman
2012-07-24 7:07 ` Archit Taneja
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=500E3B9B.9080702@ti.com \
--to=a0393947@ti.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.