Re: [Qemu-devel] [PATCH 1/2] ahci: Fix ahci cdrom read corruptions for reads > 128k

[Kevin Wolf <kwolf@redhat.com>]

Am 26.07.2012 21:40, schrieb Jason Baron:
> While testing q35, which has its cdrom attached to the ahci controller, I found
> that the Fedora 17 install would panic on boot. The panic occurs while
> squashfs is trying to read from the cdrom. The errors are:
> 
> [    8.622711] SQUASHFS error: xz_dec_run error, data probably corrupt
> [    8.625180] SQUASHFS error: squashfs_read_data failed to read block
> 0x20be48a
> 
> I was also able to produce corrupt data reads using an installed piix based
> qemu machine, using 'dd'. I found that the corruptions were only occuring when
> the read size was greater than 128k. For example, the following command
> results in corrupted reads:
> 
> dd if=/dev/sr0 of=/tmp/blah bs=256k iflag=direct
> 
> The > 128k size reads exercise a different code path than 128k and below. In
> ide_atapi_cmd_read_dma_cb() s->io_buffer_size is capped at 128k. Thus,
> ide_atapi_cmd_read_dma_cb() is called a second time when the read is > 128k.
> However, ahci_dma_rw_buf() restart the read from offset 0, instead of at 128k.
> Thus, resulting in a corrupted read.
> 
> To fix this, I've introduced 'io_buffer_offset' field in IDEState to keep
> track of the offset. I've also modified ahci_populate_sglist() to take a new
> 3rd offset argument, so that the sglist is property initialized.
> 
> I've tested this patch using 'dd' testing, and Fedora 17 now correctly boots
> and installs on q35 with the cdrom ahci controller.
> 
> Signed-off-by: Jason Baron <jbaron@redhat.com>
> ---
>  hw/ide/ahci.c     |   41 ++++++++++++++++++++++++++++++++++-------
>  hw/ide/internal.h |    1 +
>  2 files changed, 35 insertions(+), 7 deletions(-)
> 
> diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
> index efea93f..9c95714 100644
> --- a/hw/ide/ahci.c
> +++ b/hw/ide/ahci.c
> @@ -636,7 +636,7 @@ static void ahci_write_fis_d2h(AHCIDevice *ad, uint8_t *cmd_fis)
>      }
>  }
>  
> -static int ahci_populate_sglist(AHCIDevice *ad, QEMUSGList *sglist)
> +static int ahci_populate_sglist(AHCIDevice *ad, QEMUSGList *sglist, int offset)
>  {
>      AHCICmdHdr *cmd = ad->cur_cmd;
>      uint32_t opts = le32_to_cpu(cmd->opts);
> @@ -647,6 +647,10 @@ static int ahci_populate_sglist(AHCIDevice *ad, QEMUSGList *sglist)
>      uint8_t *prdt;
>      int i;
>      int r = 0;
> +    int sum = 0;
> +    int off_idx = -1;
> +    int off_pos = 0;
> +    int tbl_entry_size;
>  
>      if (!sglist_alloc_hint) {
>          DPRINTF(ad->port_no, "no sg list given by guest: 0x%08x\n", opts);
> @@ -669,10 +673,31 @@ static int ahci_populate_sglist(AHCIDevice *ad, QEMUSGList *sglist)
>      /* Get entries in the PRDT, init a qemu sglist accordingly */
>      if (sglist_alloc_hint > 0) {
>          AHCI_SG *tbl = (AHCI_SG *)prdt;
> -
> -        qemu_sglist_init(sglist, sglist_alloc_hint, ad->hba->dma);
> +        sum = 0;
>          for (i = 0; i < sglist_alloc_hint; i++) {
>              /* flags_size is zero-based */
> +            tbl_entry_size = (le32_to_cpu(tbl[i].flags_size) + 1);
> +            if (offset <= (sum + tbl_entry_size)) {
> +                off_idx = i;
> +                off_pos = offset - sum;
> +                break;
> +            }
> +            sum += tbl_entry_size;
> +        }
> +        if ((off_idx == -1) || (off_pos < 0) || (off_pos > tbl_entry_size)) {
> +            fprintf(stderr, "%s: Incorrect offset! "
> +                            "off_idx: %d, off_pos: %d\n",
> +                            __func__, off_idx, off_pos);

I would use DPRINTF here, it's not a good idea to allow the guest to
trigger fprintfs.

The rest looks good to me.

Kevin