From: Daniel Mack <zonque@gmail.com>
To: "jovanovic.ljubomir@t-online.de" <jovanovic.ljubomir@t-online.de>
Cc: alsa-devel@alsa-project.org
Subject: Re: US Robotics USB Phone
Date: Mon, 30 Jul 2012 12:52:48 +0200 [thread overview]
Message-ID: <50166780.5010307@gmail.com> (raw)
In-Reply-To: <1SvnXl-0CApFY0@fwd11.aul.t-online.de>
On 30.07.2012 12:49, jovanovic.ljubomir@t-online.de wrote:
> Here it is:
Sorry, that output is completely garbled. If you can't make your mail
client behave sanely, send it as .txt attachment.
Also: did you install a driver on Windows to make that device work?
Daniel
> Usage Type Data wMaxPacketSize
> 0x0009 1x 9 bytes bInterval 1 Endpoint
> Descriptor: bLength 7 bDescriptorType
> 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes
> 1 Transfer Type Isochronous
> Synch Type None Usage Type Data
> wMaxPacketSize 0x0009 1x 9 bytes bInterval
> 1 Interface Descriptor: bLength 9
> bDescriptorType 4 bInterfaceNumber 1
> bAlternateSetting 2 bNumEndpoints 2
> bInterfaceClass 224 Wireless bInterfaceSubClass 1
> Radio Frequency bInterfaceProtocol 1 Bluetooth
> iInterface 0 Endpoint Descriptor: bLength
> 7 bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN bmAttributes 1
> Transfer Type Isochronous Synch Type
> None Usage Type Data
> wMaxPacketSize 0x0011 1x 17 bytes bInterval
> 1 Endpoint Descriptor: bLength 7
> bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 1 Transfer Type
> Isochronous Synch Type None Usage Type
> Data wMaxPacketSize 0x0011 1x 17 bytes
> bInterval 1 Interface Descriptor: bLength
> 9 bDescriptorType 4 bInterfaceNumber
> 1 bAlternateSetting 3 bNumEndpoints 2
> bInterfaceClass 224 Wireless bInterfaceSubClass 1
> Radio Frequency bInterfaceProtocol 1 Bluetooth
> iInterface 0 Endpoint Descriptor: bLength
> 7 bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN bmAttributes 1
> Transfer Type Isochronous Synch Type
> None Usage Type Data
> wMaxPacketSize 0x0020 1x 32 bytes bInterval
> 1 Endpoint Descriptor: bLength 7
> bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 1 Transfer Type
> Isochronous Synch Type None Usage Type
> Data wMaxPacketSize 0x0020 1x 32 bytes
> bInterval 1 Interface Descriptor: bLength
> 9 bDescriptorType 4 bInterfaceNumber
> 1 bAlternateSetting 4 bNumEndpoints 2
> bInterfaceClass 224 Wireless bInterfaceSubClass 1
> Radio Frequency bInterfaceProtocol 1 Bluetooth
> iInterface 0 Endpoint Descriptor: bLength
> 7 bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN bmAttributes 1
> Transfer Type Isochronous Synch Type
> None Usage Type Data
> wMaxPacketSize 0x0040 1x 64 bytes bInterval
> 1 Endpoint Descriptor: bLength 7
> bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 1 Transfer Type
> Isochronous Synch Type None Usage Type
> Data wMaxPacketSize 0x0040 1x 64 bytes
> bInterval 1 Interface Descriptor: bLength
> 9 bDescriptorType 4 bInterfaceNumber
> 1 bAlternateSetting 5 bNumEndpoints 2
> bInterfaceClass 224 Wireless bInterfaceSubClass 1
> Radio Frequency bInterfaceProtocol 1 Bluetooth
> iInterface 0 Endpoint Descriptor: bLength
> 7 bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN bmAttributes 1
> Transfer Type Isochronous Synch Type
> None Usage Type Data
> wMaxPacketSize 0x0040 1x 64 bytes bInterval
> 1 Endpoint Descriptor: bLength 7
> bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 1 Transfer Type
> Isochronous Synch Type None Usage Type
> Data wMaxPacketSize 0x0040 1x 64 bytes
> bInterval 1 Interface Descriptor: bLength
> 9 bDescriptorType 4 bInterfaceNumber
> 2 bAlternateSetting 0 bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 255 Vendor Specific Protocol iInterface
> 0 Endpoint Descriptor: bLength 7
> bDescriptorType 5 bEndpointAddress 0x84 EP
> 4 IN bmAttributes 2 Transfer Type
> Bulk Synch Type None Usage Type
> Data wMaxPacketSize 0x0020 1x 32 bytes
> bInterval 1 Endpoint Descriptor: bLength
> 7 bDescriptorType 5 bEndpointAddress
> 0x04 EP 4 OUT bmAttributes 2 Transfer
> Type Bulk Synch Type None
> Usage Type Data wMaxPacketSize 0x0020 1x 32
> bytes bInterval 1 Interface Descriptor:
> bLength 9 bDescriptorType 4
> bInterfaceNumber 3 bAlternateSetting 0
> bNumEndpoints 0 bInterfaceClass 254 Application
> Specific Interface bInterfaceSubClass 1 Device Firmware
> Update bInterfaceProtocol 1 iInterface 0
> Device Firmware Upgrade Interface Descriptor: bLength
> 7 bDescriptorType 33
> bmAttributes 7 Will Not Detach
> Manifestation Tolerant Upload Supported
> Download Supported wDetachTimeout 5000
> milliseconds wTransferSize 64 bytesDevice
> Status: 0x0001 Self Powered
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubDevice
> Descriptor: bLength 18 bDescriptorType 1
> bcdUSB 2.00 bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed
> (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b
> Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice
> 3.04 iManufacturer 3 Linux 3.4.6-2.fc17.i686
> ehci_hcd iProduct 2 EHCI Host Controller iSerial
> 1 0000:00:1d.7 bNumConfigurations 1 Configuration
> Descriptor: bLength 9 bDescriptorType 2
> wTotalLength 25 bNumInterfaces 1
> bConfigurationValue 1 iConfiguration 0
> bmAttributes 0xe0 Self Powered Remote Wakeup
> MaxPower 0mA Interface Descriptor: bLength
> 9 bDescriptorType 4 bInterfaceNumber
> 0 bAlternateSetting 0 bNumEndpoints 1
> bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub iInterface
> 0 Endpoint Descriptor: bLength
> 7 bDescriptorType 5 bEndpointAddress 0x81
> EP 1 IN bmAttributes 3 Transfer Type
> Interrupt Synch Type None Usage
> Type Data wMaxPacketSize 0x0004 1x 4 bytes
> bInterval 12Hub Descriptor: bLength 11
> bDescriptorType 41 nNbrPorts 8 wHubCharacteristic
> 0x000a No power switching (usb 1.0) Per-port overcurrent
> protection bPwrOn2PwrGood 10 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00
> PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0503
> highspeed power enable connect Port 2: 0000.0100 power Port 3:
> 0000.0503 highspeed power enable connect Port 4: 0000.0100 power
> Port 5: 0000.0100 power Port 6: 0000.0100 power Port 7: 0000.0503
> highspeed power enable connect Port 8: 0000.0503 highspeed power
> enable connectDevice Status: 0x0001 Self Powered
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubDevice
> Descriptor: bLength 18 bDescriptorType 1
> bcdUSB 1.10 bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed
> (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b
> Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice
> 3.04 iManufacturer 3 Linux 3.4.6-2.fc17.i686
> uhci_hcd iProduct 2 UHCI Host Controller iSerial
> 1 0000:00:1d.0 bNumConfigurations 1 Configuration
> Descriptor: bLength 9 bDescriptorType 2
> wTotalLength 25 bNumInterfaces 1
> bConfigurationValue 1 iConfiguration 0
> bmAttributes 0xe0 Self Powered Remote Wakeup
> MaxPower 0mA Interface Descriptor: bLength
> 9 bDescriptorType 4 bInterfaceNumber
> 0 bAlternateSetting 0 bNumEndpoints 1
> bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub iInterface
> 0 Endpoint Descriptor: bLength
> 7 bDescriptorType 5 bEndpointAddress 0x81
> EP 1 IN bmAttributes 3 Transfer Type
> Interrupt Synch Type None Usage
> Type Data wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 255Hub Descriptor: bLength 9
> bDescriptorType 41 nNbrPorts 2 wHubCharacteristic
> 0x000a No power switching (usb 1.0) Per-port overcurrent
> protection bPwrOn2PwrGood 1 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00
> PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power
> Port 2: 0000.0103 power enable connectDevice Status: 0x0001 Self
> Powered
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubDevice
> Descriptor: bLength 18 bDescriptorType 1
> bcdUSB 1.10 bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed
> (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b
> Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice
> 3.04 iManufacturer 3 Linux 3.4.6-2.fc17.i686
> uhci_hcd iProduct 2 UHCI Host Controller iSerial
> 1 0000:00:1d.1 bNumConfigurations 1 Configuration
> Descriptor: bLength 9 bDescriptorType 2
> wTotalLength 25 bNumInterfaces 1
> bConfigurationValue 1 iConfiguration 0
> bmAttributes 0xe0 Self Powered Remote Wakeup
> MaxPower 0mA Interface Descriptor: bLength
> 9 bDescriptorType 4 bInterfaceNumber
> 0 bAlternateSetting 0 bNumEndpoints 1
> bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub iInterface
> 0 Endpoint Descriptor: bLength
> 7 bDescriptorType 5 bEndpointAddress 0x81
> EP 1 IN bmAttributes 3 Transfer Type
> Interrupt Synch Type None Usage
> Type Data wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 255Hub Descriptor: bLength 9
> bDescriptorType 41 nNbrPorts 2 wHubCharacteristic
> 0x000a No power switching (usb 1.0) Per-port overcurrent
> protection bPwrOn2PwrGood 1 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00
> PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power
> Port 2: 0000.0100 powerDevice Status: 0x0001 Self Powered
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubDevice
> Descriptor: bLength 18 bDescriptorType 1
> bcdUSB 1.10 bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed
> (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b
> Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice
> 3.04 iManufacturer 3 Linux 3.4.6-2.fc17.i686
> uhci_hcd iProduct 2 UHCI Host Controller iSerial
> 1 0000:00:1d.2 bNumConfigurations 1 Configuration
> Descriptor: bLength 9 bDescriptorType 2
> wTotalLength 25 bNumInterfaces 1
> bConfigurationValue 1 iConfiguration 0
> bmAttributes 0xe0 Self Powered Remote Wakeup
> MaxPower 0mA Interface Descriptor: bLength
> 9 bDescriptorType 4 bInterfaceNumber
> 0 bAlternateSetting 0 bNumEndpoints 1
> bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub iInterface
> 0 Endpoint Descriptor: bLength
> 7 bDescriptorType 5 bEndpointAddress 0x81
> EP 1 IN bmAttributes 3 Transfer Type
> Interrupt Synch Type None Usage
> Type Data wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 255Hub Descriptor: bLength 9
> bDescriptorType 41 nNbrPorts 2 wHubCharacteristic
> 0x000a No power switching (usb 1.0) Per-port overcurrent
> protection bPwrOn2PwrGood 1 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00
> PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power
> Port 2: 0000.0103 power enable connectDevice Status: 0x0001 Self
> Powered
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubDevice
> Descriptor: bLength 18 bDescriptorType 1
> bcdUSB 1.10 bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed
> (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b
> Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice
> 3.04 iManufacturer 3 Linux 3.4.6-2.fc17.i686
> uhci_hcd iProduct 2 UHCI Host Controller iSerial
> 1 0000:00:1d.3 bNumConfigurations 1 Configuration
> Descriptor: bLength 9 bDescriptorType 2
> wTotalLength 25 bNumInterfaces 1
> bConfigurationValue 1 iConfiguration 0
> bmAttributes 0xe0 Self Powered Remote Wakeup
> MaxPower 0mA Interface Descriptor: bLength
> 9 bDescriptorType 4 bInterfaceNumber
> 0 bAlternateSetting 0 bNumEndpoints 1
> bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub iInterface
> 0 Endpoint Descriptor: bLength
> 7 bDescriptorType 5 bEndpointAddress 0x81
> EP 1 IN bmAttributes 3 Transfer Type
> Interrupt Synch Type None Usage
> Type Data wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 255Hub Descriptor: bLength 9
> bDescriptorType 41 nNbrPorts 2 wHubCharacteristic
> 0x000a No power switching (usb 1.0) Per-port overcurrent
> protection bPwrOn2PwrGood 1 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00
> PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power
> Port 2: 0000.0100 powerDevice Status: 0x0001 Self Powered
>
> FREEMAIL@T-ONLINE.DE - Die kostenlose E-Mail Adresse unabhängig vom
> Internetanbieter. Jetzt kostenlos anmelden unter
> http://t-online.de/gratis-email [1]
>
> Links:
> ------
> [1] http://t-online.de/gratis-email
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2012-07-30 10:52 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-30 10:49 US Robotics USB Phone jovanovic.ljubomir
2012-07-30 10:52 ` Daniel Mack [this message]
-- strict thread matches above, loose matches on Subject: below --
2012-07-30 22:07 jovanovic.ljubomir
2012-07-30 14:12 jovanovic.ljubomir
2012-07-30 14:20 ` Daniel Mack
2012-07-30 8:18 jovanovic.ljubomir
2012-07-30 8:21 ` Daniel Mack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50166780.5010307@gmail.com \
--to=zonque@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=jovanovic.ljubomir@t-online.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.