Sorry, my bad, I was trying to build u-boot-fw-utils and assumed wrongly that the recipe requires u-boot.inc Radu On 08/03/2012 11:45 AM, Andrei Gherzan wrote: > On Fri, Aug 3, 2012 at 11:43 AM, Radu Moisan > wrote: > > I found the following code in u-boot.inc > > if not d.getVar("UBOOT_MACHINE", True): > PN = d.getVar("PN", True) > FILE = os.path.basename(d.getVar("FILE", True)) > bb.debug(1, "To build %s, see %s for instructions on \ > setting up your machine config" % (PN, FILE)) > raise bb.parse.SkipPackage("because UBOOT_MACHINE is not set") > > and while I don't have UBOOT_MACHINE set, u-boot still follows > with no problems through do_fetch, do_configure, do_compile and so > on, and finishes without any problem/error. I would have expected > to be skipped as the above code snipped would imply, but I cannot > find that log message anywhere (nor any error to indicate > failure). Can somebody point me in the right direction with this? > > Are you sure that variable is not set somewhere? Gave it a try on a > machine with no u-boot defined: > > ERROR: Nothing PROVIDES 'u-boot' > ERROR: u-boot was skipped: because UBOOT_MACHINE is not set > ERROR: u-boot was skipped: because UBOOT_MACHINE is not set > ERROR: u-boot was skipped: because UBOOT_MACHINE is not set > > ag > > > _______________________________________________ > Openembedded-core mailing list > Openembedded-core@lists.openembedded.org > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core