From mboxrd@z Thu Jan  1 00:00:00 1970
From: Ben Greear <greearb@candelatech.com>
Date: Fri, 03 Aug 2012 10:39:59 -0700
Subject: [ath9k-devel] Question on tx-chains
Message-ID: <501C0CEF.9010306@candelatech.com>
List-Id: <ath9k-devel.lists.ath9k.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: ath9k-devel@lists.ath9k.org

While testing setting tx & tx-chains, I notice that if I set both tx and rx to 0x2
on a 3x3 NIC, then the hardware starts failing resets and will not work.

I *can* set it to 0x1 or 0x7 and those work fine (haven't tried all other
combinations yet).

Is there some restriction to the chain masks?

Thanks,
Ben

-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com