From: Bill <bsousan@techsi.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] U-boot not finding NAND chip on imx28EVK - Gives DMA read error
Date: Mon, 06 Aug 2012 11:38:12 -0500 [thread overview]
Message-ID: <501FF2F4.30406@techsi.com> (raw)
In-Reply-To: <CAOMZO5A88MpOGxh+DXqae=355dCGDcqcu79+TpTKEsJhs3Q21Q@mail.gmail.com>
Thanks. That did it - grabbed recent version and it works.
Best,
Bill
On 8/6/2012 10:34 AM, Fabio Estevam wrote:
> Bill,
>
> On Mon, Aug 6, 2012 at 11:34 AM, Bill<bsousan@techsi.com> wrote:
>> All,
>>
>> I enabled my U-boot for NAND support for my imx28EVK and I get the
>> following error when U-Boot starts:
>>
>>
>> NAND: MXS NAND: Error sending command
>> MXS NAND: Error sending command
>> MXS NAND: DMA read error
>> MXS NAND: DMA read error
>> MXS NAND: Error sending command
>> ...
>>
>> I am using U-boot version U-Boot 2012.07-rc1. I also have the NAND
>> support enabled in /include/configs/mx28evk.h by adding CONFIG_CMD_NAND.
>> The NAND chip I am using is: Micron MT29F1G08ABADA.
> I have just tried the most recent u-boot-imx git, enabled
> CONFIG_CMD_NAND in the mx28evk.h and the NAND is detected fine:
>
> U-Boot 2012.07-08388-g9ce4714-dirty (Aug 06 2012 - 12:26:16)
>
> CPU: Freescale i.MX28 rev1.2 at 454 MHz
> BOOT: SSP SD/MMC #0, 3V3
> I2C: ready
> DRAM: 128 MiB
> NAND: 2048 MiB
> MMC: MXS MMC: 0
> In: serial
> Out: serial
> Err: serial
> Net: FEC0, FEC1
> Hit any key to stop autoboot: 0
>
> MX28EVK U-Boot> nand info
>
> Device 0: nand0, sector size 256 KiB
> Page size 2048 b
> OOB size 64 b
> Erase size 262144 b
> MX28EVK U-Boot>
>
> The NAND I am using is K9LAG08U0M.
>
> Regards,
>
> Fabio Estevam
--
William (Bill) L. Sousan, Ph.D.
(w) 402.331.4977 ext. 4002
bsousan at techsi.com
Technical Support Inc.
11253 John Galt Blvd
Omaha, NE 68137
www.techsi.com
8(a) SDB Certified, ISO 9001:2008
prev parent reply other threads:[~2012-08-06 16:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-06 14:34 [U-Boot] U-boot not finding NAND chip on imx28EVK - Gives DMA read error Bill
2012-08-06 15:34 ` Fabio Estevam
2012-08-06 16:38 ` Bill [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=501FF2F4.30406@techsi.com \
--to=bsousan@techsi.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.