From mboxrd@z Thu Jan 1 00:00:00 1970 From: "adelias-Y8qEzhMunLxMo1R+fwTmgw@public.gmane.org" Subject: Re: [alsa-devel] XMOS UAC2 Date: Thu, 09 Aug 2012 23:57:17 +0300 Message-ID: <5024242D.3010301@freemail.gr> References: <50241074.8050001@freemail.gr> <5024135E.3000900@gmail.com> <502416B5.80903@freemail.gr> <50241B0B.1050301@gmail.com> <50241E58.8020408@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1253; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <50241E58.8020408-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Daniel Mack Cc: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org, linux-usb List-Id: alsa-devel@alsa-project.org On 9/8/2012 11:32 =EC=EC, Daniel Mack wrote: > On 09.08.2012 22:18, Daniel Mack wrote: >> (Cc linux-usb) >> >> On 09.08.2012 21:59, adelias-Y8qEzhMunLxMo1R+fwTmgw@public.gmane.org wrote: >>> I've attached the dmesg of each. >>> >>> On 9/8/2012 10:45 =EC=EC, Daniel Mack wrote: >>>>> On 09.08.2012 21:33, adelias wrote: >>>>>>> I have an XMOS Reference board with the latest firmware (v3.3).= With >>>>>>> ALSA 1.0.23 it enumerates and functions properly. With ALSA 1.0= =2E25 it >>>>>>> appears to enumerate properly after boot up but will not output= sound. >>>>>>> Removing and reinserting snd-usb-audio with modprobe doesn't he= lp. Only >>>>>>> after I reset it by unpluging and repluging the usb cable will = it >>>>>>> function as it should. >>>>> >>>>> Could you provide the full boot logs of both scenarios please? >>> >>> dmesg.1.0.24 >> >> Thanks. To summarize, you're not only using two different versions o= f >> ALSA but two versions of the kernel (2.6.37 vs 3.0.36+), and the pro= blem >> is not caused by ALSA but by the USB host controller driver (see bel= ow). > > Hmm, after I had a second look, it might be this is unrelated, as the > actual sound device probe happens long after that warning. Still, tha= t > type of atomic warning is suspicious and could bring the host control= ler > driver in a bogus state. > > Please tell us if that also happens on 3.5. > > > Thanks, > Daniel Thanks for looking at this. I believe that the stable kernel sources fo= r=20 the Allwinner A10 are at 3.0.39. > >>> [ 0.000000] Initializing cgroup subsys cpuset >>> [ 0.000000] Initializing cgroup subsys cpu >>> [ 0.000000] Linux version 3.0.36+ (gnexus-pWUzPmDh5QVg9hUCZPvPmw@public.gmane.org) (gcc ver= sion 4.6.1 (Sourcery CodeBench Lite 2011.09-70) ) #34 PREEMPT Sat Jul 2= 1 11:34:33 IST 2012 >>> [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), = cr=3D10c5387d >>> [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing inst= ruction cache >>> [ 0.000000] Machine: sun4i >>> [ 0.000000] Total Detected Memory: 512MB with 1 banks >>> [ 0.000000] Ignoring unrecognised tag 0x00000000 >>> [ 0.000000] Memory Reserved(in bytes): >>> [ 0.000000] SYS: 0x43000000, 0x00010000 >>> [ 0.000000] LCD: 0x5a000000, 0x02000000 >>> [ 0.000000] G2D: 0x58000000, 0x01000000 >>> [ 0.000000] VE : 0x44000000, 0x05000000 >>> [ 0.000000] Memory policy: ECC disabled, Data cache writeback >>> [ 0.000000] On node 0 totalpages: 114688 >>> [ 0.000000] free_area_init_node: node 0, pgdat c054f6bc, node_me= m_map c0604000 >>> [ 0.000000] Normal zone: 896 pages used for memmap >>> [ 0.000000] Normal zone: 0 pages reserved >>> [ 0.000000] Normal zone: 113792 pages, LIFO batch:31 >>> [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=3D1*32768 >>> [ 0.000000] pcpu-alloc: [0] 0 >>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping o= n. Total pages: 113792 >>> [ 0.000000] Kernel command line: console=3DttyS0,115200 root=3D/= dev/mmcblk0p2 init=3D/init loglevel=3D8 rootfstype=3Dext4 rootwait >>> [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) >>> [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 26= 2144 bytes) >>> [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131= 072 bytes) >>> [ 0.000000] allocated 1835008 bytes of page_cgroup >>> [ 0.000000] please try 'cgroup_disable=3Dmemory' option if you d= on't want memory cgroups >>> [ 0.000000] Memory: 448MB =3D 448MB total >>> [ 0.000000] Memory: 315636k/315636k available, 143116k reserved,= 0K highmem >>> [ 0.000000] Virtual kernel memory layout: >>> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) >>> [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) >>> [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) >>> [ 0.000000] vmalloc : 0xdc800000 - 0xf0000000 ( 312 MB) >>> [ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB) >>> [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) >>> [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) >>> [ 0.000000] .init : 0xc0008000 - 0xc002c000 ( 144 kB) >>> [ 0.000000] .text : 0xc002c000 - 0xc0517850 (5039 kB) >>> [ 0.000000] .data : 0xc0518000 - 0xc0550040 ( 225 kB) >>> [ 0.000000] .bss : 0xc0550064 - 0xc0603630 ( 718 kB) >>> [ 0.000000] SLUB: Genslabs=3D11, HWalign=3D64, Order=3D0-3, MinO= bjects=3D0, CPUs=3D1, Nodes=3D1 >>> [ 0.000000] NR_IRQS:96 nr_irqs:96 96 >>> [ 0.000000] timer0: Periodic Mode >>> [ 0.000000] Console: colour dummy device 80x30 >>> [ 0.000000] Calibrating delay loop... 1001.88 BogoMIPS (lpj=3D50= 09408) >>> [ 0.040000] pid_max: default: 32768 minimum: 301 >>> [ 0.040000] Security Framework initialized >>> [ 0.040000] Mount-cache hash table entries: 512 >>> [ 0.050000] Initializing cgroup subsys cpuacct >>> [ 0.050000] Initializing cgroup subsys memory >>> [ 0.060000] Initializing cgroup subsys devices >>> [ 0.060000] Initializing cgroup subsys freezer >>> [ 0.060000] Initializing cgroup subsys blkio >>> [ 0.070000] Initializing cgroup subsys perf_event >>> [ 0.070000] CPU: Testing write buffer coherency: ok >>> [ 0.070000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driv= er, 5 counters available >>> [ 0.080000] devtmpfs: initialized >>> [ 0.080000] print_constraints: dummy: >>> [ 0.090000] NET: Registered protocol family 16 >>> [ 0.090000] hw-breakpoint: debug architecture 0x4 unsupported. >>> [ 0.100000] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Ele= ctronics >>> [ 0.100000] Initialize DMAC OK >>> [ 0.100000] bio: create slab at 0 >>> [ 0.110000] SCSI subsystem initialized >>> [ 0.110000] usbcore: registered new interface driver usbfs >>> [ 0.120000] usbcore: registered new interface driver hub >>> [ 0.120000] usbcore: registered new device driver usb >>> [ 0.120000] Advanced Linux Sound Architecture Driver Version 1.0= =2E24. >>> [ 0.130000] Init eGon pin module V2.0 >>> [ 0.130000] Switching to clocksource aw 64bits couter >>> [ 0.140000] FS-Cache: Loaded >>> [ 0.140000] CacheFiles: Loaded >>> [ 0.150000] Switched to NOHz mode on CPU #0 >>> [ 0.150000] [usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG >>> [ 0.150000] [sw_hcd0]: usb host driver initialize........ >>> [ 0.160000] [sw_udc]: udc_init: version 20080411 >>> [ 0.160000] [sw_udc]: usb_vbase =3D 0xf1c13000 >>> [ 0.160000] [sw_udc]: sram_vbase =3D 0xf1c00000 >>> [ 0.170000] [sw_udc]: open_usb_clock >>> [ 0.190000] udc->driver is null, udc is need not stop >>> [ 0.190000] NET: Registered protocol family 2 >>> [ 0.200000] IP route cache hash table entries: 4096 (order: 2, 1= 6384 bytes) >>> [ 0.200000] TCP established hash table entries: 16384 (order: 5,= 131072 bytes) >>> [ 0.210000] TCP bind hash table entries: 16384 (order: 4, 65536 = bytes) >>> [ 0.210000] TCP: Hash tables configured (established 16384 bind = 16384) >>> [ 0.220000] TCP reno registered >>> [ 0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes) >>> [ 0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 byt= es) >>> [ 0.230000] NET: Registered protocol family 1 >>> [ 0.240000] [pm]aw_pm_init! >>> [ 0.240000] audit: initializing netlink socket (disabled) >>> [ 0.240000] type=3D2000 audit(0.239:1): initialized >>> [ 0.260000] VFS: Disk quotas dquot_6.5.2 >>> [ 0.260000] Dquot-cache hash table entries: 1024 (order 0, 4096 = bytes) >>> [ 0.270000] msgmni has been set to 616 >>> [ 0.270000] alg: No test for stdrng (krng) >>> [ 0.270000] Block layer SCSI generic (bsg) driver version 0.4 lo= aded (major 253) >>> [ 0.280000] io scheduler noop registered >>> [ 0.280000] io scheduler deadline registered >>> [ 0.290000] io scheduler cfq registered (default) >>> [ 0.290000] Serial: 8250/16550 driver, 8 ports, IRQ sharing disa= bled >>> [ 0.320000] serial8250.0: ttyS0 at MMIO 0x1c28000 (irq =3D 1) is= a U6_16550A >>> [ 0.860000] console [ttyS0] enabled >>> [ 0.870000] [uart]: used uart info.: 0x05 >>> [ 0.900000] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq =3D 1) is= a U6_16550A >>> [ 0.910000] [uart]: serial probe 0, membase (null) irq 1 mapba= se 0x01c28000 >>> [ 0.940000] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq =3D 3) is= a U6_16550A >>> [ 0.960000] [uart]: serial probe 2, membase (null) irq 3 mapba= se 0x01c28800 >>> [ 0.970000] G2D: drv_g2d_init >>> [ 0.970000] G2D: g2dmem: g2d_start=3D58000000, g2d_size=3D100000= 0 >>> [ 0.980000] G2D: head:d8000000,tail:d9000000 >>> [ 0.990000] G2D: Module initialized.major:251 >>> [ 1.000000] [drm] Initialized drm 1.1.0 20060810 >>> [ 1.010000] brd: module loaded >>> [ 1.010000] [NAND]nand driver, init. >>> [ 1.020000] cmu_clk is 360 >>> [ 1.020000] nand clk init end >>> [ 1.030000] offset 0xc: 0x6141 >>> [ 1.030000] offset 0x14: 0x82000008 >>> [ 1.040000] [NAND] nand gpio_request >>> [ 1.050000] [NAND] nand driver version: 0x2 0x9 >>> [ 1.050000] nand interrupte register ok >>> [ 1.060000] ret of NFC_ChangMode is 0 >>> [ 1.070000] dma_hdle is 0 >>> [ 1.070000] dma_hdle is 10000008 >>> [ 1.080000] cmu_clk is 360 >>> [ 1.080000] nand clk init end >>> [ 1.080000] offset 0xc: 0x6141 >>> [ 1.090000] offset 0x14: 0x82000005 >>> [ 1.110000] The 0 disk name =3D bootloader, class name =3D DISK,= disk size =3D 32768 >>> [ 1.130000] The 1 disk name =3D env, class name =3D DISK, disk s= ize =3D 4096 >>> [ 1.140000] The 2 disk name =3D boot, class name =3D DISK, disk = size =3D 65536 >>> [ 1.150000] The 3 disk name =3D system, class name =3D DISK, dis= k size =3D 524288 >>> [ 1.160000] The 4 disk name =3D data, class name =3D DISK, disk = size =3D 524288 >>> [ 1.180000] The 5 disk name =3D misc, class name =3D DISK, disk = size =3D 2048 >>> [ 1.190000] The 6 disk name =3D recovery, class name =3D DISK, d= isk size =3D 65536 >>> [ 1.200000] The 7 disk name =3D cache, class name =3D DISK, disk= size =3D 262144 >>> [ 1.210000] The 8 disk name =3D private, class name =3D DISK, di= sk size =3D 2048 >>> [ 1.230000] The 9 disk name =3D sysrecovery, class name =3D DISK= , disk size =3D 655360 >>> [ 1.240000] The 10 disk name =3D UDISK, class name =3D DISK, dis= k size =3D 0 >>> [ 1.250000] The 10 disk size =3D 5642240 >>> [ 1.260000] part total count =3D 11 >>> [ 1.260000] nanda: >>> [ 1.270000] nandb: unknown partition table >>> [ 1.280000] nandc: unknown partition table >>> [ 1.290000] nandd: unknown partition table >>> [ 1.300000] nande: unknown partition table >>> [ 1.300000] nandf: unknown partition table >>> [ 1.310000] nandg: unknown partition table >>> [ 1.320000] nandh: unknown partition table >>> [ 1.330000] nandi: >>> [ 1.340000] nandj: unknown partition table >>> [ 1.340000] nandk: >>> [ 1.350000] benn: nand probe enter >>> [ 1.350000] [NAND]nand driver, ok. >>> [ 1.360000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) = Driver >>> [ 1.370000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driv= er >>> [ 1.380000] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1,= sw_ehci: 0xc05fe5dc >>> [ 1.400000] [sw-ehci1]: open clock >>> [ 1.420000] [sw-ehci1]: Set USB Power ON >>> [ 1.430000] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Control= ler (EHCI) Driver >>> [ 1.440000] sw-ehci sw-ehci.1: new USB bus registered, assigned = bus number 1 >>> [ 1.460000] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000 >>> [ 1.490000] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00 >>> [ 1.490000] ehci_irq: port change detect >>> [ 1.500000] usb usb1: New USB device found, idVendor=3D1d6b, idP= roduct=3D0002 >>> [ 1.510000] usb usb1: New USB device strings: Mfr=3D3, Product=3D= 2, SerialNumber=3D1 >>> [ 1.530000] usb usb1: Product: SW USB2.0 'Enhanced' Host Control= ler (EHCI) Driver >>> [ 1.540000] usb usb1: Manufacturer: Linux 3.0.36+ ehci_hcd >>> [ 1.550000] usb usb1: SerialNumber: sw-ehci >>> [ 1.560000] hub 1-0:1.0: USB hub found >>> [ 1.570000] hub 1-0:1.0: 1 port detected >>> [ 1.570000] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1,= sw_ohci: 0xc05fe6ec >>> [ 1.590000] [sw-ohci1]: open clock >>> [ 1.610000] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller = (OHCI) Driver >>> [ 1.630000] sw-ohci sw-ohci.1: new USB bus registered, assigned = bus number 2 >>> [ 1.640000] sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400 >>> [ 1.710000] usb usb2: New USB device found, idVendor=3D1d6b, idP= roduct=3D0001 >>> [ 1.720000] usb usb2: New USB device strings: Mfr=3D3, Product=3D= 2, SerialNumber=3D1 >>> [ 1.730000] usb usb2: Product: SW USB2.0 'Open' Host Controller = (OHCI) Driver >>> [ 1.750000] usb usb2: Manufacturer: Linux 3.0.36+ ohci_hcd >>> [ 1.760000] usb usb2: SerialNumber: sw-ohci >>> [ 1.770000] hub 2-0:1.0: USB hub found >>> [ 1.770000] hub 2-0:1.0: 1 port detected >>> [ 1.780000] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2,= sw_ehci: 0xc05fe800 >>> [ 1.790000] [sw-ehci2]: open clock >>> [ 1.820000] [sw-ehci2]: Set USB Power ON >>> [ 1.830000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Control= ler (EHCI) Driver >>> [ 1.840000] sw-ehci sw-ehci.2: new USB bus registered, assigned = bus number 3 >>> [ 1.850000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000 >>> [ 1.890000] usb 1-1: new high speed USB device number 2 using sw= -ehci >>> [ 1.920000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00 >>> [ 1.920000] ehci_irq: port change detect >>> [ 1.930000] usb usb3: New USB device found, idVendor=3D1d6b, idP= roduct=3D0002 >>> [ 1.940000] usb usb3: New USB device strings: Mfr=3D3, Product=3D= 2, SerialNumber=3D1 >>> [ 1.960000] usb usb3: Product: SW USB2.0 'Enhanced' Host Control= ler (EHCI) Driver >>> [ 47.380000] usb usb3: Manufacturer: Linux 3.0.36+ ehci_hcd >>> [ 47.390000] usb usb3: SerialNumber: sw-ehci >>> [ 47.400000] hub 3-0:1.0: USB hub found >>> [ 47.410000] hub 3-0:1.0: 1 port detected >>> [ 47.410000] [sw-ehci2]: sw_usb_disable_ehci >>> [ 47.420000] [sw-ehci2]: remove, pdev->name: sw-ehci, pdev->id: 2= , sw_ehci: 0xc05fe800 >>> [ 47.440000] sw-ehci sw-ehci.2: remove, state 1 >>> [ 47.440000] usb usb3: USB disconnect, device number 1 >>> [ 47.450000] BUG: scheduling while atomic: swapper/1/0x40000002 >>> [ 47.460000] Modules linked in: >>> [ 47.470000] [] (unwind_backtrace+0x0/0xe0) from [] (__schedule+0x5c/0x4ec) >>> [ 47.480000] [] (__schedule+0x5c/0x4ec) from [] (__cond_resched+0x14/0x20) >>> [ 47.500000] [] (__cond_resched+0x14/0x20) from [] (_cond_resched+0x34/0x44) >>> [ 47.520000] [] (_cond_resched+0x34/0x44) from [] (wakeup_source_unregister+0xc/0x18) >>> [ 47.530000] [] (wakeup_source_unregister+0xc/0x18) fro= m [] (device_wakeup_disable+0x64/0x78) >>> [ 47.550000] [] (device_wakeup_disable+0x64/0x78) from = [] (device_pm_remove+0x48/0x58) >>> [ 47.570000] [] (device_pm_remove+0x48/0x58) from [] (device_del+0x34/0x168) >>> [ 47.590000] [] (device_del+0x34/0x168) from [] (usb_disconnect+0x9c/0xf8) >>> [ 47.600000] [] (usb_disconnect+0x9c/0xf8) from [] (usb_remove_hcd+0xb8/0x174) >>> [ 47.620000] [] (usb_remove_hcd+0xb8/0x174) from [] (sw_ehci_hcd_remove+0x9c/0x104) >>> [ 47.640000] [] (sw_ehci_hcd_remove+0x9c/0x104) from [<= c0295cec>] (sw_usb_disable_ehci+0xc8/0xf0) >>> [ 47.650000] [] (sw_usb_disable_ehci+0xc8/0xf0) from [<= c0295ed0>] (sw_ehci_hcd_probe+0x1bc/0x228) >>> [ 47.670000] [] (sw_ehci_hcd_probe+0x1bc/0x228) from [<= c02409c4>] (platform_drv_probe+0x14/0x18) >>> [ 47.690000] [] (platform_drv_probe+0x14/0x18) from [] (driver_probe_device+0xc8/0x184) >>> [ 47.710000] [] (driver_probe_device+0xc8/0x184) from [= ] (bus_for_each_drv+0x48/0x80) >>> [ 47.730000] [] (bus_for_each_drv+0x48/0x80) from [] (device_attach+0x74/0xa0) >>> [ 47.740000] [] (device_attach+0x74/0xa0) from [] (bus_probe_device+0x24/0x40) >>> [ 47.760000] [] (bus_probe_device+0x24/0x40) from [] (device_add+0x39c/0x528) >>> [ 47.780000] [] (device_add+0x39c/0x528) from [] (platform_device_add+0x108/0x164) >>> [ 47.790000] [] (platform_device_add+0x108/0x164) from = [] (sw_hci_sun4i_init+0x154/0x1f0) >>> [ 47.810000] [] (sw_hci_sun4i_init+0x154/0x1f0) from [<= c002c408>] (do_one_initcall+0x90/0x160) >>> [ 47.830000] [] (do_one_initcall+0x90/0x160) from [] (kernel_init+0xb0/0x15c) >>> [ 47.840000] [] (kernel_init+0xb0/0x15c) from [] (kernel_thread_exit+0x0/0x8) >>> [ 47.860000] sw-ehci sw-ehci.2: USB bus 3 deregistered >> >> Well, this is your problem appearantly, and it has nothing to do wit= h >> ALSA. Not sure what causes this and whether this was a known problem= in >> that 3.0.36+ kernel that you're using. >> >>> [ 47.870000] [sw-ehci2]: Set USB Power OFF >>> [ 47.880000] [sw-ehci2]: close clock >>> [ 47.880000] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2,= sw_ohci: 0xc05fe910 >>> [ 47.900000] [sw-ohci2]: open clock >>> [ 47.920000] [sw-ohci2]: Set USB Power ON >>> [ 47.930000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller = (OHCI) Driver >>> [ 47.940000] sw-ohci sw-ohci.2: new USB bus registered, assigned = bus number 3 >>> [ 47.960000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400 >>> [ 47.970000] BUG: scheduling while atomic: swapper/1/0x00000002 >>> [ 47.980000] Modules linked in: >>> [ 47.980000] [] (unwind_backtrace+0x0/0xe0) from [] (__schedule+0x5c/0x4ec) >>> [ 48.000000] [] (__schedule+0x5c/0x4ec) from [] (schedule_timeout+0x1d0/0x20c) >>> [ 48.010000] [] (schedule_timeout+0x1d0/0x20c) from [] (msleep+0x14/0x20) >>> [ 48.030000] [] (msleep+0x14/0x20) from [] (o= hci_run+0xc0/0x434) >>> [ 48.040000] [] (ohci_run+0xc0/0x434) from []= (sw_ohci_start+0x24/0x68) >>> [ 48.060000] [] (sw_ohci_start+0x24/0x68) from [] (usb_add_hcd+0x2cc/0x60c) >>> [ 48.070000] [] (usb_add_hcd+0x2cc/0x60c) from [] (sw_ohci_hcd_probe+0x148/0x220) >>> [ 48.090000] [] (sw_ohci_hcd_probe+0x148/0x220) from [<= c02409c4>] (platform_drv_probe+0x14/0x18) >>> [ 48.110000] [] (platform_drv_probe+0x14/0x18) from [] (driver_probe_device+0xc8/0x184) >>> [ 48.130000] [] (driver_probe_device+0xc8/0x184) from [= ] (bus_for_each_drv+0x48/0x80) >>> [ 48.140000] [] (bus_for_each_drv+0x48/0x80) from [] (device_attach+0x74/0xa0) >>> [ 48.160000] [] (device_attach+0x74/0xa0) from [] (bus_probe_device+0x24/0x40) >>> [ 48.180000] [] (bus_probe_device+0x24/0x40) from [] (device_add+0x39c/0x528) >>> [ 48.190000] [] (device_add+0x39c/0x528) from [] (platform_device_add+0x108/0x164) >>> [ 48.210000] [] (platform_device_add+0x108/0x164) from = [] (sw_hci_sun4i_init+0x190/0x1f0) >>> [ 48.230000] [] (sw_hci_sun4i_init+0x190/0x1f0) from [<= c002c408>] (do_one_initcall+0x90/0x160) >>> [ 48.250000] [] (do_one_initcall+0x90/0x160) from [] (kernel_init+0xb0/0x15c) >>> [ 48.260000] [] (kernel_init+0xb0/0x15c) from [] (kernel_thread_exit+0x0/0x8) >>> [ 48.280000] usb usb3: New USB device found, idVendor=3D1d6b, idP= roduct=3D0001 >>> [ 48.300000] usb usb3: New USB device strings: Mfr=3D3, Product=3D= 2, SerialNumber=3D1 >>> [ 48.310000] usb usb3: Product: SW USB2.0 'Open' Host Controller = (OHCI) Driver >>> [ 48.320000] usb usb3: Manufacturer: Linux 3.0.36+ ohci_hcd >>> [ 48.330000] usb usb3: SerialNumber: sw-ohci >>> [ 48.340000] hub 3-0:1.0: USB hub found >>> [ 48.350000] hub 3-0:1.0: 1 port detected >>> [ 48.350000] [sw-ohci2]: sw_usb_disable_ohci >>> [ 48.360000] [sw-ohci2]: remove, pdev->name: sw-ohci, pdev->id: 2= , sw_ohci: 0xc05fe910 >>> [ 48.380000] sw-ohci sw-ohci.2: remove, state 1 >>> [ 48.380000] usb usb3: USB disconnect, device number 1 >>> [ 48.390000] BUG: scheduling while atomic: swapper/1/0x40000002 >>> [ 48.400000] Modules linked in: >>> [ 48.410000] [] (unwind_backtrace+0x0/0xe0) from [] (__schedule+0x5c/0x4ec) >>> [ 48.420000] [] (__schedule+0x5c/0x4ec) from [] (__cond_resched+0x14/0x20) >>> [ 48.440000] [] (__cond_resched+0x14/0x20) from [] (_cond_resched+0x34/0x44) >>> [ 48.460000] [] (_cond_resched+0x34/0x44) from [] (wakeup_source_unregister+0xc/0x18) >>> [ 48.470000] [] (wakeup_source_unregister+0xc/0x18) fro= m [] (device_wakeup_disable+0x64/0x78) >>> [ 48.490000] [] (device_wakeup_disable+0x64/0x78) from = [] (device_pm_remove+0x48/0x58) >>> [ 48.510000] [] (device_pm_remove+0x48/0x58) from [] (device_del+0x34/0x168) >>> [ 48.530000] [] (device_del+0x34/0x168) from [] (usb_disconnect+0x9c/0xf8) >>> [ 48.540000] [] (usb_disconnect+0x9c/0xf8) from [] (usb_remove_hcd+0xb8/0x174) >>> [ 48.560000] [] (usb_remove_hcd+0xb8/0x174) from [] (sw_ohci_hcd_remove+0xa0/0x104) >>> [ 48.580000] [] (sw_ohci_hcd_remove+0xa0/0x104) from [<= c029ce5c>] (sw_usb_disable_ohci+0xc8/0xf0) >>> [ 48.590000] [] (sw_usb_disable_ohci+0xc8/0xf0) from [<= c029d034>] (sw_ohci_hcd_probe+0x1b0/0x220) >>> [ 48.610000] [] (sw_ohci_hcd_probe+0x1b0/0x220) from [<= c02409c4>] (platform_drv_probe+0x14/0x18) >>> [ 48.630000] [] (platform_drv_probe+0x14/0x18) from [] (driver_probe_device+0xc8/0x184) >>> [ 48.650000] [] (driver_probe_device+0xc8/0x184) from [= ] (bus_for_each_drv+0x48/0x80) >>> [ 48.670000] [] (bus_for_each_drv+0x48/0x80) from [] (device_attach+0x74/0xa0) >>> [ 48.680000] [] (device_attach+0x74/0xa0) from [] (bus_probe_device+0x24/0x40) >>> [ 48.700000] [] (bus_probe_device+0x24/0x40) from [] (device_add+0x39c/0x528) >>> [ 48.710000] [] (device_add+0x39c/0x528) from [] (platform_device_add+0x108/0x164) >>> [ 48.730000] [] (platform_device_add+0x108/0x164) from = [] (sw_hci_sun4i_init+0x190/0x1f0) >>> [ 48.750000] [] (sw_hci_sun4i_init+0x190/0x1f0) from [<= c002c408>] (do_one_initcall+0x90/0x160) >>> [ 48.770000] [] (do_one_initcall+0x90/0x160) from [] (kernel_init+0xb0/0x15c) >>> [ 48.780000] [] (kernel_init+0xb0/0x15c) from [] (kernel_thread_exit+0x0/0x8) >>> [ 48.800000] sw-ohci sw-ohci.2: USB bus 3 deregistered >>> [ 48.810000] [sw-ohci2]: Set USB Power OFF >>> [ 48.820000] [sw-ohci2]: close clock >>> [ 48.820000] initcall sw_hci_sun4i_init+0x0/0x1f0 returned with p= reemption imbalance >>> [ 48.840000] mousedev: PS/2 mouse device common for all mice >>> [ 48.850000] sunxi RTC version 0.1 >>> [ 48.850000] sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data =3D 38= 0239881 >>> [ 48.860000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime >>> [ 48.870000] usb 1-1: New USB device found, idVendor=3D05e3, idPr= oduct=3D0608 >>> [ 48.890000] sunxi-rtc sunxi-rtc: read time 2010-1-1 2:0:12 >>> [ 48.900000] using rtc device, rtc, for alarms >>> [ 48.900000] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc= 0 >>> [ 48.910000] usb 1-1: New USB device strings: Mfr=3D0, Product=3D= 1, SerialNumber=3D0 >>> [ 48.930000] i2c /dev entries driver >>> [ 48.930000] !!! base_Addr =3D 0xdc84ac00 >>> [ 48.940000] config i2c gpio with gpio_config api >>> [ 48.950000] usb 1-1: Product: USB2.0 Hub >>> [ 48.960000] twi0, apb clock =3D 24000000 >>> [ 48.960000] hub 1-1:1.0: USB hub found >>> [ 48.970000] hub 1-1:1.0: 4 ports detected >>> [ 48.980000] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected >>> [ 48.990000] I2C: i2c-0: AW16XX I2C adapter >>> [ 48.990000] **********start************ >>> [ 49.000000] 0x40 >>> [ 49.000000] 0xf8 >>> [ 49.010000] 0x28 >>> [ 49.010000] 0x0 >>> [ 49.010000] 0x0 >>> [ 49.010000] **********end************ >>> [ 49.020000] !!! base_Addr =3D 0xdc84c000 >>> [ 49.030000] twi1, apb clock =3D 24000000 >>> [ 49.030000] I2C: i2c-1: AW16XX I2C adapter >>> [ 49.040000] **********start************ >>> [ 49.050000] 0x40 >>> [ 49.050000] 0xf8 >>> [ 49.050000] 0x58 >>> [ 49.050000] 0x0 >>> [ 49.060000] 0x0 >>> [ 49.060000] **********end************ >>> [ 49.060000] !!! base_Addr =3D 0xdc84e400 >>> [ 49.070000] twi2, apb clock =3D 24000000 >>> [ 49.080000] I2C: i2c-2: AW16XX I2C adapter >>> [ 49.080000] **********start************ >>> [ 49.090000] 0x40 >>> [ 49.090000] 0xf8 >>> [ 49.100000] 0x58 >>> [ 49.100000] 0x0 >>> [ 49.100000] 0x0 >>> [ 49.100000] **********end************ >>> [ 49.110000] Linux media interface: v0.10 >>> [ 49.120000] [cedar dev]: install start!!! >>> [ 49.120000] [cedar dev]: install end!!! >>> [ 49.130000] print_constraints: axp20_ldo1: 1300 mV >>> [ 49.140000] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at = 3000 mV >>> [ 49.150000] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2= 800 mV >>> [ 49.170000] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at = 2800 mV >>> [ 49.180000] print_constraints: axp20_buck2: 700 <--> 2275 mV at = 1400 mV >>> [ 49.190000] print_constraints: axp20_buck3: 700 <--> 3500 mV at = 1250 mV >>> [ 49.200000] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV a= t 2800 mV >>> [ 49.220000] input: axp20-supplyer as /devices/platform/sun4i-i2c= =2E0/i2c-0/0-0034/axp20-supplyer.28/input/input0 >>> [ 49.240000] [AXP]axp driver uning configuration failed(1579) >>> [ 49.250000] [AXP]pmu_suspendpwroff_vol =3D 3500 >>> [ 49.270000] cpuidle: using governor ladder >>> [ 49.280000] cpuidle: using governor menu >>> [ 49.280000] [mmc_pm]: no sdio card used in configuration >>> [ 49.290000] [mmc]: sunximmc_init >>> [ 49.300000] [mmc]: sunxi mmc controller using config : 0xb >>> [ 49.310000] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id:= 0 >>> [ 49.320000] [mmc]: mmc 0 power off !! >>> [ 49.320000] usb 1-1.2: new high speed USB device number 3 using = sw-ehci >>> [ 49.340000] [mmc]: mmc0 Probe: base:0xdc854000 irq:32 dma:0 pdes= :0xd9a04000, ret 0. >>> [ 49.350000] [mmc]: sunxi-mmc.1: pdev->name: sunxi-mmc, pdev->id:= 1 >>> [ 49.360000] [mmc]: mmc 1 power off !! >>> [ 49.370000] [mmc]: mmc1 Probe: base:0xdc856000 irq:33 dma:0 pdes= :0xd9a10000, ret 0. >>> [ 49.380000] [mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id:= 3 >>> [ 49.390000] [mmc]: mmc 3 power off !! >>> [ 49.400000] [mmc]: mmc3 Probe: base:0xdc858000 irq:35 dma:0 pdes= :0xd9a14000, ret 0. >>> [ 49.410000] enter sun4i Audio codec!!! >>> [ 49.420000] sun4i audio support initialized >>> [ 49.430000] audiocodec_adap_awxx_init: script_parser_fetch err. >>> [ 49.440000] sun4i Audio codec successfully loaded.. >>> [ 49.450000] asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok >>> [ 49.460000] asoc: sndspdif <-> sun4i-spdif.0 mapping ok >>> [ 49.470000] [I2S]sun4i-i2s cannot find any using configuration f= or controllers, return directly! >>> [ 49.490000] [I2S]sndi2s cannot find any using configuration for = controllers, return directly! >>> [ 49.500000] [I2S]sun4i_sndi2s cannot find any using configuratio= n for controllers, return directly! >>> [ 49.520000] ALSA device list: >>> [ 49.530000] #0: sun4i-CODEC Audio Codec >>> [ 49.530000] #1: sun4i-sndhdmi >>> [ 49.540000] #2: sun4i-sndspdif >>> [ 49.540000] usb 1-1.2: New USB device found, idVendor=3D20b1, id= Product=3D0002 >>> [ 49.560000] TCP cubic registered >>> [ 49.560000] NET: Registered protocol family 10 >>> [ 49.570000] NET: Registered protocol family 17 >>> [ 49.580000] usb 1-1.2: New USB device strings: Mfr=3D1, Product=3D= 2, SerialNumber=3D3 >>> [ 49.590000] Registering the dns_resolver key type >>> [ 49.600000] usb 1-1.2: Product: XMOS USB Audio 2.0 >>> [ 49.610000] VFP support v0.3: >>> [ 49.620000] usb 1-1.2: Manufacturer: XMOS >>> [ 49.620000] usb 1-1.2: SerialNumber: 0000 >>> [ 49.630000] implementor 41 architecture 3 part 30 variant c rev = 3 >>> [ 49.640000] ThumbEE CPU extension supported. >>> [ 49.650000] Registering SWP/SWPB emulation handler >>> [ 49.660000] registered taskstats version 1 >>> [ 49.670000] [LCD] lcd_module_init >>> [ 49.730000] [DISP WRN] file:drivers/video/sun4i/disp/de_bsp/de/d= isp_lcd.c,line:592: lcd1_para.lcd_used not exit >>> [ 49.750000] regulator_init_complete: axp20_buck3: incomplete con= straints, leaving on >>> [ 49.770000] regulator_init_complete: axp20_buck2: incomplete con= straints, leaving on >>> [ 49.780000] regulator_init_complete: axp20_ldo4: incomplete cons= traints, leaving on >>> [ 49.800000] regulator_init_complete: axp20_ldo3: incomplete cons= traints, leaving on >>> [ 49.810000] regulator_init_complete: axp20_ldo2: incomplete cons= traints, leaving on >>> [ 49.830000] regulator_init_complete: axp20_ldo1: incomplete cons= traints, leaving on >>> [ 49.840000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime >>> [ 49.850000] sunxi-rtc sunxi-rtc: read time 2010-1-1 2:0:13 >>> [ 49.860000] sunxi-rtc sunxi-rtc: setting system clock to 2010-01= -01 02:00:13 UTC (1262311213) >>> [ 49.880000] Waiting for root device /dev/mmcblk0p2... >>> [ 50.340000] [mmc]: mmc 0 detect change, present 1 >>> [ 50.640000] [mmc]: mmc 0 power on !! >>> [ 50.680000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, = RTO !! >>> [ 50.690000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, = RTO !! >>> [ 50.700000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, = RTO !! >>> [ 50.720000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, = RTO !! >>> [ 50.730000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, = RTO !! >>> [ 50.740000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, = RTO !! >>> [ 50.790000] mmc0: new high speed SDHC card at address b368 >>> [ 50.800000] mmcblk0: mmc0:b368 USD 7.46 GiB >>> [ 50.810000] mmcblk0: p1 p2 p3 >>> [ 50.880000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered= data mode. Opts: (null) >>> [ 50.890000] VFS: Mounted root (ext4 filesystem) on device 179:2. >>> [ 50.910000] devtmpfs: mounted >>> [ 50.910000] Freeing init memory: 144K >>> [ 50.920000] Failed to execute /init. Attempting defaults... >>> [ 52.020000] udevd[136]: starting version 175 >>> [ 54.290000] ALSA sound/usb/mixer.c:342 cannot get ctl value: req= =3D 0x83, wValue =3D 0x201, wIndex =3D 0xa00, type =3D 4 >>> [ 54.310000] ALSA sound/usb/mixer.c:342 cannot get ctl value: req= =3D 0x83, wValue =3D 0x200, wIndex =3D 0xa00, type =3D 4 >>> [ 54.330000] usbcore: registered new interface driver snd-usb-aud= io >>> [ 54.920000] Adding 262136k swap on /dev/mmcblk0p3. Priority:-1 = extents:1 across:262136k SS >>> [ 56.840000] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) >>> [ 57.280000] UMP<2>: Inserting UMP device driver. Compiled: Jul 2= 1 2012, time: 11:43:11 >>> [ 57.300000] UMP<2>: Using OS memory backend, allocation limit: 1= 34217728 >>> [ 57.310000] UMP: UMP device driver loaded >>> [ 57.360000] mali: use config clk_div 3 >>> [ 57.360000] mali: clk_div 3 >>> [ 57.380000] Mali: mali clock set completed, clock is 320000000 = Mhz >>> [ 57.390000] Mali: Mali device driver loaded >>> [ 57.460000] wemac Ethernet Driver, V1.00 in file:drivers/net/sun= 4i/sun4i_wemac.c >>> [ 57.490000] [EMAC] ahb clk enable >>> [ 57.490000] [EMAC] ahb gate clk: 0x26147 >>> [ 57.520000] wemac wemac.0: PHY SETUP, reg 0 value: 0 >>> [ 57.530000] wemac wemac.0: resetting device >>> [ 57.540000] release temp resource >>> [ 62.140000] wemac wemac.0: enabling eth0 >>> [ 62.140000] wemac wemac.0: WARNING: no IRQ resource flags set. >>> [ 62.150000] wemac wemac.0: resetting device >>> [ 62.160000] wemac wemac.0: eth0: link up, 100Mbps, full-duplex, = lpa 0xFFFF >>> [ 67.460000] RPC: Registered named UNIX socket transport module. >>> [ 67.470000] RPC: Registered udp transport module. >>> [ 67.480000] RPC: Registered tcp transport module. >>> [ 67.490000] RPC: Registered tcp NFSv4.1 backchannel transport mo= dule. >>> [ 67.750000] FS-Cache: Netfs 'nfs' registered for caching >>> [ 67.870000] Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UZALxuqxpT9JA@public.gmane.org= de). >>> [ 72.600000] eth0: no IPv6 routers present >>> [ 81.520000] usbcore: deregistering interface driver snd-usb-audi= o >>> [ 82.050000] ALSA sound/usb/mixer.c:342 cannot get ctl value: req= =3D 0x83, wValue =3D 0x201, wIndex =3D 0xa00, type =3D 4 >>> [ 82.070000] ALSA sound/usb/mixer.c:342 cannot get ctl value: req= =3D 0x83, wValue =3D 0x200, wIndex =3D 0xa00, type =3D 4 >>> [ 82.100000] usbcore: registered new interface driver snd-usb-aud= io >>> [ 288.510000] usbcore: deregistering interface driver snd-usb-audi= o >>> [ 296.390000] ALSA sound/usb/mixer.c:342 cannot get ctl value: req= =3D 0x83, wValue =3D 0x201, wIndex =3D 0xa00, type =3D 4 >>> [ 296.420000] ALSA sound/usb/mixer.c:342 cannot get ctl value: req= =3D 0x83, wValue =3D 0x200, wIndex =3D 0xa00, type =3D 4 >>> [ 296.460000] usbcore: registered new interface driver snd-usb-aud= io >>> [ 384.700000] usb 1-1.2: USB disconnect, device number 3 >>> [ 392.090000] ehci_irq: port change detect >>> [ 392.350000] usb 1-1.2: new high speed USB device number 4 using = sw-ehci >>> [ 392.470000] usb 1-1.2: New USB device found, idVendor=3D20b1, id= Product=3D0002 >>> [ 392.490000] usb 1-1.2: New USB device strings: Mfr=3D1, Product=3D= 2, SerialNumber=3D3 >>> [ 392.510000] usb 1-1.2: Product: XMOS USB Audio 2.0 >>> [ 392.510000] usb 1-1.2: Manufacturer: XMOS >>> [ 392.530000] usb 1-1.2: SerialNumber: 0000 >>> [ 393.010000] ALSA sound/usb/mixer.c:342 cannot get ctl value: req= =3D 0x83, wValue =3D 0x201, wIndex =3D 0xa00, type =3D 4 >>> [ 393.040000] ALSA sound/usb/mixer.c:342 cannot get ctl value: req= =3D 0x83, wValue =3D 0x200, wIndex =3D 0xa00, type =3D 4 >>> >>> >>> dmesg.1.0.23 >>> >>> >>> Linux version 2.6.37-dockstar (root@debian) (gcc version 4.4.5 (Deb= ian 4.4.5-4) ) #6 Mon Jan 17 01:55:44 CET 2011 >>> CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=3D0005397= 7 >>> CPU: VIVT data cache, VIVT instruction cache >>> Machine: Seagate Dockstar Board >>> Memory policy: ECC disabled, Data cache writeback >>> On node 0 totalpages: 32768 >>> free_area_init_node: node 0, pgdat c0559fa4, node_mem_map c0588000 >>> Normal zone: 256 pages used for memmap >>> Normal zone: 0 pages reserved >>> Normal zone: 32512 pages, LIFO batch:7 >>> pcpu-alloc: s0 r0 d32768 u32768 alloc=3D1*32768 >>> pcpu-alloc: [0] 0 >>> Built 1 zonelists in Zone order, mobility grouping on. Total pages= : 32512 >>> Kernel command line: console=3DttyS0,115200 root=3D/dev/sda1 rootde= lay=3D10 rootfstype=3Dext2 mtdparts=3Dorion_nand:1M(u-boot),4M(uImage),= 32M(rootfs),-(data) >>> PID hash table entries: 512 (order: -1, 2048 bytes) >>> Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) >>> Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) >>> Memory: 128MB =3D 128MB total >>> Memory: 124248k/124248k available, 6824k reserved, 0K highmem >>> Virtual kernel memory layout: >>> vector : 0xffff0000 - 0xffff1000 ( 4 kB) >>> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) >>> DMA : 0xffc00000 - 0xffe00000 ( 2 MB) >>> vmalloc : 0xc8800000 - 0xfe800000 ( 864 MB) >>> lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) >>> modules : 0xbf000000 - 0xc0000000 ( 16 MB) >>> .init : 0xc0008000 - 0xc0030000 ( 160 kB) >>> .text : 0xc0030000 - 0xc0525000 (5076 kB) >>> .data : 0xc0526000 - 0xc055b680 ( 214 kB) >>> SLUB: Genslabs=3D13, HWalign=3D32, Order=3D0-3, MinObjects=3D0, CPU= s=3D1, Nodes=3D1 >>> NR_IRQS:114 >>> Console: colour dummy device 80x30 >>> Calibrating delay loop... 1192.75 BogoMIPS (lpj=3D5963776) >>> pid_max: default: 32768 minimum: 301 >>> Mount-cache hash table entries: 512 >>> CPU: Testing write buffer coherency: ok >>> regulator: core version 0.5 >>> regulator: dummy: >>> NET: Registered protocol family 16 >>> i2c-core: driver [dummy] registered >>> Kirkwood: MV88F6281-A0, TCLK=3D200000000. >>> Feroceon L2: Cache support initialised. >>> initial MPP regs: 01111111 11113322 00001111 00100000 00000000 0000= 0000 00000000 >>> final MPP regs: 01111111 11113322 00001111 00000000 00000000 000= 00000 00000000 >>> bio: create slab at 0 >>> vgaarb: loaded >>> i2c-core: driver [88PM860x] registered >>> SCSI subsystem initialized >>> usbcore: registered new interface driver usbfs >>> usbcore: registered new interface driver hub >>> usbcore: registered new device driver usb >>> Switching to clocksource orion_clocksource >>> FS-Cache: Loaded >>> NET: Registered protocol family 2 >>> IP route cache hash table entries: 1024 (order: 0, 4096 bytes) >>> TCP established hash table entries: 4096 (order: 3, 32768 bytes) >>> TCP bind hash table entries: 4096 (order: 2, 16384 bytes) >>> TCP: Hash tables configured (established 4096 bind 4096) >>> TCP reno registered >>> UDP hash table entries: 256 (order: 0, 4096 bytes) >>> UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) >>> NET: Registered protocol family 1 >>> RPC: Registered udp transport module. >>> RPC: Registered tcp transport module. >>> RPC: Registered tcp NFSv4.1 backchannel transport module. >>> PCI: CLS 0 bytes, default 32 >>> FS-Cache: Netfs 'nfs' registered for caching >>> nfs4filelayout_init: NFSv4 File Layout Driver Registering... >>> Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org). >>> fuse init (API version 7.15) >>> msgmni has been set to 242 >>> io scheduler noop registered >>> io scheduler deadline registered >>> io scheduler cfq registered (default) >>> Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled >>> serial8250.0: ttyS0 at MMIO 0xf1012000 (irq =3D 33) is a 16550A >>> console [ttyS0] enabled >>> brd: module loaded >>> loop: module loaded >>> physmap-flash.0: failed to claim resource 0 >>> ONFI flash detected >>> ONFI param page 0 valid >>> NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256M= iB 3,3V 8-bit) >>> Scanning device for bad blocks >>> Bad eraseblock 877 at 0x000006da0000 >>> Bad eraseblock 952 at 0x000007700000 >>> Bad eraseblock 1020 at 0x000007f80000 >>> 4 cmdlinepart partitions found on MTD device orion_nand >>> Creating 4 MTD partitions on "orion_nand": >>> 0x000000000000-0x000000100000 : "u-boot" >>> 0x000000100000-0x000000500000 : "uImage" >>> 0x000000500000-0x000002500000 : "rootfs" >>> 0x000002500000-0x000010000000 : "data" >>> MV-643xx 10/100/1000 ethernet driver version 1.4 >>> mv643xx_eth smi: probed >>> net eth0: port 0 with MAC address 00:10:75:1a:42:2a >>> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver >>> orion-ehci orion-ehci.0: Marvell Orion EHCI >>> orion-ehci orion-ehci.0: new USB bus registered, assigned bus numbe= r 1 >>> orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 >>> orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 >>> hub 1-0:1.0: USB hub found >>> hub 1-0:1.0: 1 port detected >>> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver >>> uhci_hcd: USB Universal Host Controller Interface driver >>> Initializing USB Mass Storage driver... >>> usbcore: registered new interface driver usb-storage >>> USB Mass Storage support registered. >>> usbcore: registered new interface driver usbserial >>> USB Serial support registered for generic >>> usbcore: registered new interface driver usbserial_generic >>> usbserial: USB Serial Driver core >>> mice: PS/2 mouse device common for all mice >>> i2c /dev entries driver >>> i2c-core: driver [dev_driver] registered >>> lirc_dev: IR Remote Control driver registered, major 253 >>> IR NEC protocol handler initialized >>> IR RC5(x) protocol handler initialized >>> IR RC6 protocol handler initialized >>> IR JVC protocol handler initialized >>> IR Sony protocol handler initialized >>> IR RC5 (streamzap) protocol handler initialized >>> IR LIRC bridge handler initialized >>> Orion Watchdog Timer: Initial timeout 21 sec >>> cpuidle: using governor ladder >>> cpuidle: using governor menu >>> mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver >>> mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver >>> mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) >>> mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) >>> mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) >>> mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) >>> sdhci: Secure Digital Host Controller Interface driver >>> sdhci: Copyright(c) Pierre Ossman >>> mmc0: mvsdio driver initialized, lacking card detect (fall back to = polling) >>> Registered led device: dockstar:green:health >>> Registered led device: dockstar:orange:health >>> Driver for HIFN 795x crypto accelerator chip has been successfully = registered. >>> usbcore: registered new interface driver usbhid >>> usbhid: USB HID core driver >>> zram: num_devices not specified. Using default: 1 >>> zram: Creating 1 devices ... >>> oprofile: hardware counters not available >>> oprofile: using timer interrupt. >>> TCP cubic registered >>> NET: Registered protocol family 17 >>> Gating clock of unused units >>> before: 0x00dfc3fd >>> after: 0x00c701d9 >>> drivers/rtc/hctosys.c: unable to open rtc device (rtc0) >>> Waiting 10sec before mounting root device... >>> usb 1-1: new high speed USB device using orion-ehci and address 2 >>> hub 1-1:1.0: USB hub found >>> hub 1-1:1.0: 4 ports detected >>> usb 1-1.2: new high speed USB device using orion-ehci and address 3 >>> scsi0 : usb-storage 1-1.2:1.0 >>> scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: = 0 ANSI: 0 CCS >>> sd 0:0:0:0: Attached scsi generic sg0 type 0 >>> sd 0:0:0:0: [sda] 7880704 512-byte logical blocks: (4.03 GB/3.75 Gi= B) >>> sd 0:0:0:0: [sda] Write Protect is off >>> sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 >>> sd 0:0:0:0: [sda] Assuming drive cache: write through >>> sd 0:0:0:0: [sda] Assuming drive cache: write through >>> sda: sda1 sda2 >>> sd 0:0:0:0: [sda] Assuming drive cache: write through >>> sd 0:0:0:0: [sda] Attached SCSI removable disk >>> VFS: Mounted root (ext2 filesystem) on device 8:1. >>> Freeing init memory: 160K >>> rtc-mv rtc-mv: internal RTC not ticking >>> Adding 260092k swap on /dev/sda2. Priority:-1 extents:1 across:260= 092k >>> eth0: link up, 100 Mb/s, full duplex, flow control disabled >>> sshd (1097): /proc/1097/oom_adj is deprecated, please use /proc/109= 7/oom_score_adj instead. >>> usb 1-1.3: new high speed USB device using orion-ehci and address 4 >>> usbcore: registered new interface driver snd-usb-audio >>> >> > > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html