From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marc Pignat Date: Mon, 13 Aug 2012 06:09:10 +0000 Subject: Re: [lm-sensors] Output problem with adcxx on at91 Message-Id: <50289A06.8070503@hevs.ch> List-Id: References: <5019526C.2030802@comconcepts.com> In-Reply-To: <5019526C.2030802@comconcepts.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org John, On 08/10/2012 03:12 PM, John Rippetoe wrote: > On 08/10/2012 08:31 AM, John Rippetoe wrote: >> Marc, >> >> No problem at all, better for it to be accessible to others in case >> they run across similar issues. >> >> No kidding? As far as I know the at91rm9200 is essentially the >> grandfather of the at91sam9g20 I am using now; similar design but two >> revisions older. If I good remember, the at91sam family has a newer spi controller. ... >> I assume you are using the atmel-spi driver as the master controller >> driver correct? If so, did you make any modifications to it at all? I was using the one comming with the kernel ;) Best regards Marc _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors