All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: Gerd Hoffmann <kraxel@redhat.com>
Cc: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH] ehci: fix Interrupt Threshold Control implementation
Date: Wed, 15 Aug 2012 14:57:22 +0200	[thread overview]
Message-ID: <502B9CB2.7050409@redhat.com> (raw)
In-Reply-To: <1345032008-29365-1-git-send-email-kraxel@redhat.com>

Hi,

On 08/15/2012 02:00 PM, Gerd Hoffmann wrote:
> First, not all interrupts are subject to Interrupt Threshold Control,
> some of them must be delivered without delay.
>
> Second, Interrupt Threshold Control state must be part of vmstate,
> otherwise we might loose IRQs on migration.

Looks good except for 2 things:

1) For some reason it does not fix my redirected usb mass storage device not
seen until lsusb issue, I will investigate this further
2) Does not apply cleanly to master, there is no vmstate_ehci.pre_seave
in master

Regards,

Hans



>
> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
> ---
>   hw/usb/hcd-ehci.c |   12 ++++++++++--
>   1 files changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c
> index 2eeef29..b78bf44 100644
> --- a/hw/usb/hcd-ehci.c
> +++ b/hw/usb/hcd-ehci.c
> @@ -576,7 +576,12 @@ static inline void ehci_update_irq(EHCIState *s)
>   /* flag interrupt condition */
>   static inline void ehci_raise_irq(EHCIState *s, int intr)
>   {
> -    s->usbsts_pending |= intr;
> +    if (intr & (USBSTS_PCD | USBSTS_FLR | USBSTS_HSE)) {
> +        s->usbsts |= intr;
> +        ehci_update_irq(s);
> +    } else {
> +        s->usbsts_pending |= intr;
> +    }
>   }
>
>   /*
> @@ -2480,7 +2485,8 @@ static int usb_ehci_post_load(void *opaque, int version_id)
>
>   static const VMStateDescription vmstate_ehci = {
>       .name        = "ehci",
> -    .version_id  = 1,
> +    .version_id  = 2,
> +    .minimum_version_id  = 1,
>       .pre_save    = usb_ehci_pre_save,
>       .post_load   = usb_ehci_post_load,
>       .fields      = (VMStateField[]) {
> @@ -2488,6 +2494,8 @@ static const VMStateDescription vmstate_ehci = {
>           /* mmio registers */
>           VMSTATE_UINT32(usbcmd, EHCIState),
>           VMSTATE_UINT32(usbsts, EHCIState),
> +        VMSTATE_UINT32_V(usbsts_pending, EHCIState, 2),
> +        VMSTATE_UINT32_V(usbsts_frindex, EHCIState, 2),
>           VMSTATE_UINT32(usbintr, EHCIState),
>           VMSTATE_UINT32(frindex, EHCIState),
>           VMSTATE_UINT32(ctrldssegment, EHCIState),
>

      reply	other threads:[~2012-08-15 12:56 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-15 12:00 [Qemu-devel] [PATCH] ehci: fix Interrupt Threshold Control implementation Gerd Hoffmann
2012-08-15 12:57 ` Hans de Goede [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=502B9CB2.7050409@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=kraxel@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.