[U-Boot] [PATCH 1/2] MX28: config: Allow different target generation in elftosb call

[Stefano Babic <sbabic@denx.de>]

On 15/08/2012 20:51, Otavio Salvador wrote:
> The elftosb call needs to use a target param specific for i.MX28. This
> patch allow for later addition of i.MX233.
> 
> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
> ---
>  Makefile                                                  |    5 ++++-
>  arch/arm/cpu/arm926ejs/mxs/{u-boot.bd => u-boot.bd.imx28} |    0
>  2 files changed, 4 insertions(+), 1 deletion(-)
>  rename arch/arm/cpu/arm926ejs/mxs/{u-boot.bd => u-boot.bd.imx28} (100%)
> 
> diff --git a/Makefile b/Makefile
> index f6471e2..5f11bb7 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -452,8 +452,11 @@ $(obj)u-boot.ais:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
>  		cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.bin > \
>  			$(obj)u-boot.ais
>  
> +# Specify the target for use in elftosb call
> +ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
> +
>  $(obj)u-boot.sb:       $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
> -		elftosb -zdf imx28 -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot.bd \
> +		elftosb -zdf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot.bd.$(ELFTOSB_TARGET-y) \
>  			-o $(obj)u-boot.sb
>  
>  # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
> diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot.bd b/arch/arm/cpu/arm926ejs/mxs/u-boot.bd.imx28
> similarity index 100%
> rename from arch/arm/cpu/arm926ejs/mxs/u-boot.bd
> rename to arch/arm/cpu/arm926ejs/mxs/u-boot.bd.imx28


IMHO it looks good

Acked-by: Stefano Babic <sbabic@denx.de>

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================