From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V4 1/3] imx-common/cmd_bmode.c: add imx bmode (bootmode) command
Date: Fri, 17 Aug 2012 12:25:55 +0200 [thread overview]
Message-ID: <502E1C33.4080707@denx.de> (raw)
In-Reply-To: <1345062683-19134-1-git-send-email-troy.kisky@boundarydevices.com>
On 15/08/2012 22:31, Troy Kisky wrote:
Hi Troy,
> This is useful for forcing the ROM's
> usb downloader to activate upon a watchdog reset.
> Or, you can boot from either SD Card.
>
> Currently, support added for MX53 and MX6Q
> Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
>
> Note: MX53 support untested.
I will test it before merging.
>
> ---
> v4: replaced some occurrances of reset s/reset/boot/ or s/reset/b/
> renamed files
> only bmode command now, added noreset argument.
> add static keywords
> ---
> arch/arm/cpu/armv7/imx-common/Makefile | 1 +
> arch/arm/cpu/armv7/imx-common/cmd_bmode.c | 119 +++++++++++++++++++++++++++
> arch/arm/cpu/armv7/mx5/soc.c | 31 +++++++
> arch/arm/cpu/armv7/mx6/soc.c | 36 ++++++++
> arch/arm/include/asm/arch-mx5/imx-regs.h | 18 ++++
> arch/arm/include/asm/arch-mx6/imx-regs.h | 21 +++++
> arch/arm/include/asm/imx-common/boot_mode.h | 36 ++++++++
> 7 files changed, 262 insertions(+)
> create mode 100644 arch/arm/cpu/armv7/imx-common/cmd_bmode.c
> create mode 100644 arch/arm/include/asm/imx-common/boot_mode.h
>
> diff --git a/arch/arm/cpu/armv7/imx-common/Makefile b/arch/arm/cpu/armv7/imx-common/Makefile
> index bf36be5..16fba8d 100644
> --- a/arch/arm/cpu/armv7/imx-common/Makefile
> +++ b/arch/arm/cpu/armv7/imx-common/Makefile
> @@ -29,6 +29,7 @@ LIB = $(obj)libimx-common.o
>
> COBJS-y = iomux-v3.o timer.o cpu.o speed.o
> COBJS-$(CONFIG_I2C_MXC) += i2c.o
> +COBJS-$(CONFIG_CMD_BMODE) += cmd_bmode.o
> COBJS := $(sort $(COBJS-y))
>
> SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
> diff --git a/arch/arm/cpu/armv7/imx-common/cmd_bmode.c b/arch/arm/cpu/armv7/imx-common/cmd_bmode.c
> new file mode 100644
> index 0000000..02fe72e
> --- /dev/null
> +++ b/arch/arm/cpu/armv7/imx-common/cmd_bmode.c
> @@ -0,0 +1,119 @@
> +/*
> + * Copyright (C) 2012 Boundary Devices Inc.
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +#include <common.h>
> +#include <asm/errno.h>
> +#include <asm/io.h>
> +#include <asm/imx-common/boot_mode.h>
> +#include <malloc.h>
> +
> +static const struct boot_mode *modes[2];
> +
> +static const struct boot_mode *search_modes(char *arg)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(modes); i++) {
> + const struct boot_mode *p = modes[i];
> + if (p) {
> + while (p->name) {
> + if (!strcmp(p->name, arg))
> + return p;
> + p++;
> + }
> + }
> + }
> + return NULL;
> +}
> +
> +static int create_usage(char *dest)
> +{
> + int i;
> + int size = 0;
> +
> + for (i = 0; i < ARRAY_SIZE(modes); i++) {
> + const struct boot_mode *p = modes[i];
> + if (p) {
> + while (p->name) {
> + int len = strlen(p->name);
> + if (dest) {
> + memcpy(dest, p->name, len);
> + dest += len;
> + *dest++ = '|';
> + }
> + size += len + 1;
> + p++;
> + }
> + }
> + }
> + if (dest)
> + memcpy(dest - 1, " [noreset]", 11); /* include trailing 0 */
> + size += 10;
> + return size;
> +}
> +
> +static int do_boot_mode(cmd_tbl_t *cmdtp, int flag, int argc,
> + char * const argv[])
> +{
> + const struct boot_mode *p;
> + int reset_requested = 1;
> +
> + if (argc < 2)
> + return CMD_RET_USAGE;
> + p = search_modes(argv[1]);
> + if (!p)
> + return CMD_RET_USAGE;
> + if (argc == 3) {
> + if (strcmp(argv[2], "noreset"))
> + return CMD_RET_USAGE;
> + reset_requested = 0;
> + }
> +
> + boot_mode_apply(p->cfg_val);
> + if (reset_requested && p->cfg_val)
> + do_reset(NULL, 0, 0, NULL);
> + return 0;
> +}
> +
> +U_BOOT_CMD(
> + bmode, 3, 0, do_boot_mode,
> + NULL,
> + "");
> +
> +void add_board_boot_modes(const struct boot_mode *p)
> +{
> + int size;
> + char *dest;
> +
> + if (__u_boot_cmd_bmode.usage) {
> + free(__u_boot_cmd_bmode.usage);
> + __u_boot_cmd_bmode.usage = NULL;
> + }
> +
> + modes[0] = p;
> + modes[1] = soc_boot_modes;
> + size = create_usage(NULL);
> + dest = malloc(size);
> + if (dest) {
> + create_usage(dest);
> + __u_boot_cmd_bmode.usage = dest;
> + }
> +}
> diff --git a/arch/arm/cpu/armv7/mx5/soc.c b/arch/arm/cpu/armv7/mx5/soc.c
> index 3f5a4f7..d9ca88a 100644
> --- a/arch/arm/cpu/armv7/mx5/soc.c
> +++ b/arch/arm/cpu/armv7/mx5/soc.c
> @@ -30,6 +30,7 @@
>
> #include <asm/errno.h>
> #include <asm/io.h>
> +#include <asm/imx-common/boot_mode.h>
>
> #if !(defined(CONFIG_MX51) || defined(CONFIG_MX53))
> #error "CPU_TYPE not defined"
> @@ -115,3 +116,33 @@ void set_chipselect_size(int const cs_size)
>
> writel(reg, &iomuxc_regs->gpr1);
> }
> +
> +#ifdef CONFIG_MX53
> +void boot_mode_apply(unsigned cfg_val)
> +{
> + writel(cfg_val, &((struct srtc_regs *)SRTC_BASE_ADDR)->lpgr);
> +}
> +/*
> + * cfg_val will be used for
> + * Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0]
> + *
> + * If bit 28 of LPGR is set upon watchdog reset,
> + * bits[25:0] of LPGR will move to SBMR.
> + */
> +const struct boot_mode soc_boot_modes[] = {
> + {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)},
> + /* usb or serial download */
> + {"usb", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x13)},
> + {"sata", MAKE_CFGVAL(0x28, 0x00, 0x00, 0x12)},
> + {"escpi1:0", MAKE_CFGVAL(0x38, 0x20, 0x00, 0x12)},
> + {"escpi1:1", MAKE_CFGVAL(0x38, 0x20, 0x04, 0x12)},
> + {"escpi1:2", MAKE_CFGVAL(0x38, 0x20, 0x08, 0x12)},
> + {"escpi1:3", MAKE_CFGVAL(0x38, 0x20, 0x0c, 0x12)},
> + /* 4 bit bus width */
> + {"esdhc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x12)},
> + {"esdhc2", MAKE_CFGVAL(0x40, 0x20, 0x08, 0x12)},
> + {"esdhc3", MAKE_CFGVAL(0x40, 0x20, 0x10, 0x12)},
> + {"esdhc4", MAKE_CFGVAL(0x40, 0x20, 0x18, 0x12)},
> + {NULL, 0},
> +};
> +#endif
> diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
> index 84b458c..7380ffe 100644
> --- a/arch/arm/cpu/armv7/mx6/soc.c
> +++ b/arch/arm/cpu/armv7/mx6/soc.c
> @@ -29,6 +29,7 @@
> #include <asm/arch/imx-regs.h>
> #include <asm/arch/clock.h>
> #include <asm/arch/sys_proto.h>
> +#include <asm/imx-common/boot_mode.h>
>
> u32 get_cpu_rev(void)
> {
> @@ -141,3 +142,38 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
>
> }
> #endif
> +
> +void boot_mode_apply(unsigned cfg_val)
> +{
> + unsigned reg;
> + struct src_regs *psrc = (struct src_regs *)SRC_BASE_ADDR;
> + writel(cfg_val, &psrc->gpr9);
> + reg = readl(&psrc->gpr10);
> + if (cfg_val)
> + reg |= 1 << 28;
> + else
> + reg &= ~(1 << 28);
> + writel(reg, &psrc->gpr10);
> +}
> +/*
> + * cfg_val will be used for
> + * Boot_cfg4[7:0]:Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0]
> + * After reset, if GPR10[28] is 1, ROM will copy GPR9[25:0]
> + * to SBMR1, which will determine the boot device.
> + */
> +const struct boot_mode soc_boot_modes[] = {
> + {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)},
> + /* reserved value should start rom usb */
> + {"usb", MAKE_CFGVAL(0x01, 0x00, 0x00, 0x00)},
> + {"sata", MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)},
> + {"escpi1:0", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x08)},
> + {"escpi1:1", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x18)},
> + {"escpi1:2", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x28)},
> + {"escpi1:3", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x38)},
> + /* 4 bit bus width */
> + {"esdhc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)},
> + {"esdhc2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
> + {"esdhc3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
> + {"esdhc4", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
> + {NULL, 0},
> +};
> diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h
> index 7f66b61..c53465f 100644
> --- a/arch/arm/include/asm/arch-mx5/imx-regs.h
> +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h
> @@ -459,6 +459,24 @@ struct src {
> u32 simr;
> };
>
> +struct srtc_regs {
> + u32 lpscmr; /* 0x00 */
> + u32 lpsclr; /* 0x04 */
> + u32 lpsar; /* 0x08 */
> + u32 lpsmcr; /* 0x0c */
> + u32 lpcr; /* 0x10 */
> + u32 lpsr; /* 0x14 */
> + u32 lppdr; /* 0x18 */
> + u32 lpgr; /* 0x1c */
> + u32 hpcmr; /* 0x20 */
> + u32 hpclr; /* 0x24 */
> + u32 hpamr; /* 0x28 */
> + u32 hpalr; /* 0x2c */
> + u32 hpcr; /* 0x30 */
> + u32 hpisr; /* 0x34 */
> + u32 hpienr; /* 0x38 */
> +};
> +
> /* CSPI registers */
> struct cspi_regs {
> u32 rxdata;
> diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
> index 5d77603..dacb9ea 100644
> --- a/arch/arm/include/asm/arch-mx6/imx-regs.h
> +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
> @@ -448,5 +448,26 @@ struct iomuxc_base_regs {
> u32 daisy[104]; /* 0x7b0..94c */
> };
>
> +struct src_regs {
> + u32 scr; /* 0x00 */
> + u32 sbmr1; /* 0x04 */
> + u32 srsr; /* 0x08 */
> + u32 reserved1; /* 0x0c */
> + u32 reserved2; /* 0x10 */
> + u32 sisr; /* 0x14 */
> + u32 simr; /* 0x18 */
> + u32 sbmr2; /* 0x1c */
> + u32 gpr1; /* 0x20 */
> + u32 gpr2; /* 0x24 */
> + u32 gpr3; /* 0x28 */
> + u32 gpr4; /* 0x2c */
> + u32 gpr5; /* 0x30 */
> + u32 gpr6; /* 0x34 */
> + u32 gpr7; /* 0x38 */
> + u32 gpr8; /* 0x3c */
> + u32 gpr9; /* 0x40 */
> + u32 gpr10; /* 0x44 */
> +};
> +
> #endif /* __ASSEMBLER__*/
> #endif /* __ASM_ARCH_MX6_IMX_REGS_H__ */
> diff --git a/arch/arm/include/asm/imx-common/boot_mode.h b/arch/arm/include/asm/imx-common/boot_mode.h
> new file mode 100644
> index 0000000..6d2df74
> --- /dev/null
> +++ b/arch/arm/include/asm/imx-common/boot_mode.h
> @@ -0,0 +1,36 @@
> +/*
> + * Copyright (C) 2012 Boundary Devices Inc.
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef _ASM_BOOT_MODE_H
> +#define _ASM_BOOT_MODE_H
> +#define MAKE_CFGVAL(cfg1, cfg2, cfg3, cfg4) \
> + ((cfg4) << 24) | ((cfg3) << 16) | ((cfg2) << 8) | (cfg1)
> +
> +struct boot_mode {
> + const char *name;
> + unsigned cfg_val;
> +};
> +
> +void add_board_boot_modes(const struct boot_mode *p);
> +void boot_mode_apply(unsigned cfg_val);
> +extern const struct boot_mode soc_boot_modes[];
> +#endif
>
Acked-by: Stefano Babic <sbabic@denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2012-08-17 10:25 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-15 20:31 [U-Boot] [PATCH V4 1/3] imx-common/cmd_bmode.c: add imx bmode (bootmode) command Troy Kisky
2012-08-15 20:31 ` [U-Boot] [PATCH V4 2/3] mx6qsabrelite: add boot_mode support Troy Kisky
2012-08-15 20:31 ` [U-Boot] [PATCH V4 3/3] mx53evk: " Troy Kisky
2012-08-17 10:25 ` Stefano Babic [this message]
2012-08-20 7:58 ` [U-Boot] [PATCH V4 1/3] imx-common/cmd_bmode.c: add imx bmode (bootmode) command Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=502E1C33.4080707@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.