Re: [PATCH] input: qt1070: add device tree support

[Shubhrajyoti <shubhrajyoti@ti.com>]

Hi Bo,
On Friday 17 August 2012 03:33 PM, Bo Shen wrote:
> This patch enable the qt1070 device tree support
>
> If using device tree, the node of qt1070 looks like
> i2c@0 {					     // this is an example
> 	status = "okay";		     // Enable i2c master
> 	qt1070@1b {
> 		compatible = "atmel,qt1070"; // FDT device id
> 		reg = <0x1b>;		     // qt1070 i2c address
> 		change-gpio = <&pioA 7 1>;   // gpio used as interrupt
> 	};
> };
>
> Signed-off-by: Bo Shen <voice.shen@atmel.com>
> ---
>  drivers/input/keyboard/qt1070.c |   19 ++++++++++++++++---
>  1 file changed, 16 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/input/keyboard/qt1070.c b/drivers/input/keyboard/qt1070.c
> index ca68f29..7d656b5 100644
> --- a/drivers/input/keyboard/qt1070.c
> +++ b/drivers/input/keyboard/qt1070.c
> @@ -33,6 +33,8 @@
>  #include <linux/interrupt.h>
>  #include <linux/jiffies.h>
>  #include <linux/delay.h>
> +#include <linux/of.h>
> +#include <linux/of_gpio.h>
>  
>  /* Address for each register */
>  #define CHIP_ID            0x00
> @@ -155,6 +157,10 @@ static int __devinit qt1070_probe(struct i2c_client *client,
>  		return -ENODEV;
>  	}
>  
> +	if (client->dev.of_node)
> +		client->irq = of_get_named_gpio(client->dev.of_node,
> +				"change-gpio", 0);
> +
>  	if (!client->irq) {
>  		dev_err(&client->dev, "please assign the irq to this device\n");
>  		return -EINVAL;
> @@ -200,9 +206,9 @@ static int __devinit qt1070_probe(struct i2c_client *client,
>  	qt1070_write(client, RESET, 1);
>  	msleep(QT1070_RESET_TIME);
>  
> -	err = request_threaded_irq(client->irq, NULL, qt1070_interrupt,
> -				   IRQF_TRIGGER_NONE | IRQF_ONESHOT,
> -				   client->dev.driver->name, data);
where is the gpio request done?
Am I missing something?
> +	err = request_threaded_irq(gpio_to_irq(client->irq), NULL,
> +			qt1070_interrupt, IRQF_TRIGGER_NONE | IRQF_ONESHOT,
> +			client->dev.driver->name, data);
>  	if (err) {
>  		dev_err(&client->dev, "fail to request irq\n");
>  		goto err_free_mem;
> @@ -243,6 +249,12 @@ static int __devexit qt1070_remove(struct i2c_client *client)
>  	return 0;
>  }
>  
> +static const struct of_device_id atmel_qt1070_of_match[] = {
> +	{ .compatible = "atmel,qt1070", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, atmel_qt1070_of_match);
> +
>  static const struct i2c_device_id qt1070_id[] = {
>  	{ "qt1070", 0 },
>  	{ },
> @@ -253,6 +265,7 @@ static struct i2c_driver qt1070_driver = {
>  	.driver	= {
>  		.name	= "qt1070",
>  		.owner	= THIS_MODULE,
> +		.of_match_table = atmel_qt1070_of_match,
>  	},
>  	.id_table	= qt1070_id,
>  	.probe		= qt1070_probe,