From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/7] mx35: Move clock enums to clock.h
Date: Mon, 20 Aug 2012 13:50:28 +0200 [thread overview]
Message-ID: <50322484.9050302@denx.de> (raw)
In-Reply-To: <2048761165.2411430.1344976340969.JavaMail.root@advansee.com>
On 14/08/2012 22:32, Beno?t Th?baudeau wrote:
> Signed-off-by: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com>
> Cc: Stefano Babic <sbabic@denx.de>
> ---
> .../arch/arm/cpu/arm1136/mx35/generic.c | 4 +--
> .../arch/arm/include/asm/arch-mx35/clock.h | 28 +++++++++++++++++++-
> .../arch/arm/include/asm/arch-mx35/imx-regs.h | 26 ------------------
> 3 files changed, 29 insertions(+), 29 deletions(-)
>
> diff --git u-boot-4d3c95f.orig/arch/arm/cpu/arm1136/mx35/generic.c u-boot-4d3c95f/arch/arm/cpu/arm1136/mx35/generic.c
> index 986b1f9..dba4903 100644
> --- u-boot-4d3c95f.orig/arch/arm/cpu/arm1136/mx35/generic.c
> +++ u-boot-4d3c95f/arch/arm/cpu/arm1136/mx35/generic.c
> @@ -205,7 +205,7 @@ u32 imx_get_uartclk(void)
> return freq;
> }
>
> -unsigned int mxc_get_main_clock(enum mxc_main_clocks clk)
> +unsigned int mxc_get_main_clock(enum mxc_main_clock clk)
> {
> u32 nfc_pdf, hsp_podf;
> u32 pll, ret_val = 0, usb_prdf, usb_podf;
> @@ -270,7 +270,7 @@ unsigned int mxc_get_main_clock(enum mxc_main_clocks clk)
>
> return ret_val;
> }
> -unsigned int mxc_get_peri_clock(enum mxc_peri_clocks clk)
> +unsigned int mxc_get_peri_clock(enum mxc_peri_clock clk)
> {
> u32 ret_val = 0, pdf, pre_pdf, clk_sel;
> struct ccm_regs *ccm =
> diff --git u-boot-4d3c95f.orig/arch/arm/include/asm/arch-mx35/clock.h u-boot-4d3c95f/arch/arm/include/asm/arch-mx35/clock.h
> index 4c0ddfd..5dc53ba 100644
> --- u-boot-4d3c95f.orig/arch/arm/include/asm/arch-mx35/clock.h
> +++ u-boot-4d3c95f/arch/arm/include/asm/arch-mx35/clock.h
> @@ -25,7 +25,7 @@
> #define __ASM_ARCH_CLOCK_H
>
> enum mxc_clock {
> - MXC_ARM_CLK = 0,
> + MXC_ARM_CLK,
> MXC_AHB_CLK,
> MXC_IPG_CLK,
> MXC_IPG_PERCLK,
> @@ -36,6 +36,32 @@ enum mxc_clock {
> MXC_FEC_CLK,
> };
>
> +enum mxc_main_clock {
> + CPU_CLK,
> + AHB_CLK,
> + IPG_CLK,
> + IPG_PER_CLK,
> + NFC_CLK,
> + USB_CLK,
> + HSP_CLK,
> +};
> +
> +enum mxc_peri_clock {
> + UART1_BAUD,
> + UART2_BAUD,
> + UART3_BAUD,
> + SSI1_BAUD,
> + SSI2_BAUD,
> + CSI_BAUD,
> + MSHC_CLK,
> + ESDHC1_CLK,
> + ESDHC2_CLK,
> + ESDHC3_CLK,
> + SPDIF_CLK,
> + SPI1_CLK,
> + SPI2_CLK,
> +};
> +
> unsigned int imx_decode_pll(unsigned int pll, unsigned int f_ref);
>
> u32 imx_get_uartclk(void);
> diff --git u-boot-4d3c95f.orig/arch/arm/include/asm/arch-mx35/imx-regs.h u-boot-4d3c95f/arch/arm/include/asm/arch-mx35/imx-regs.h
> index 3146006..fba29b2 100644
> --- u-boot-4d3c95f.orig/arch/arm/include/asm/arch-mx35/imx-regs.h
> +++ u-boot-4d3c95f/arch/arm/include/asm/arch-mx35/imx-regs.h
> @@ -216,32 +216,6 @@
> #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
> #include <asm/types.h>
>
> -enum mxc_main_clocks {
> - CPU_CLK,
> - AHB_CLK,
> - IPG_CLK,
> - IPG_PER_CLK,
> - NFC_CLK,
> - USB_CLK,
> - HSP_CLK,
> -};
> -
> -enum mxc_peri_clocks {
> - UART1_BAUD,
> - UART2_BAUD,
> - UART3_BAUD,
> - SSI1_BAUD,
> - SSI2_BAUD,
> - CSI_BAUD,
> - MSHC_CLK,
> - ESDHC1_CLK,
> - ESDHC2_CLK,
> - ESDHC3_CLK,
> - SPDIF_CLK,
> - SPI1_CLK,
> - SPI2_CLK,
> -};
> -
> /* Clock Control Module (CCM) registers */
> struct ccm_regs {
> u32 ccmr; /* Control */
>
Acked-by: Stefano Babic <sbabic@denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2012-08-20 11:50 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-14 20:32 [U-Boot] [PATCH 1/7] mx35: Move clock enums to clock.h Benoît Thébaudeau
2012-08-14 20:32 ` [U-Boot] [PATCH 2/7] mx35: Remove declaration of non-existing function Benoît Thébaudeau
2012-08-20 11:56 ` Stefano Babic
2012-08-14 20:32 ` [U-Boot] [PATCH 3/7] mx35: Fix decode_pll Benoît Thébaudeau
2012-09-01 8:15 ` Stefano Babic
2012-09-02 13:01 ` stefano babic
2012-09-06 9:03 ` Stefano Babic
2012-08-14 20:33 ` [U-Boot] [PATCH 4/7] mx35: Add definitions for clock gate values Benoît Thébaudeau
2012-09-06 9:02 ` Stefano Babic
2012-08-14 20:33 ` [U-Boot] [PATCH 5/7] mx35: Fix clock dividers Benoît Thébaudeau
2012-09-01 9:15 ` Stefano Babic
2012-09-03 15:31 ` Benoît Thébaudeau
2012-09-03 15:55 ` Stefano Babic
2012-09-06 9:01 ` Stefano Babic
2012-09-06 9:03 ` Stefano Babic
2012-08-14 20:33 ` [U-Boot] [PATCH 6/7] mx35: Fix eSDHC clocks Benoît Thébaudeau
2012-08-20 12:07 ` Stefano Babic
2012-08-20 12:27 ` Benoît Thébaudeau
2012-08-20 12:34 ` Benoît Thébaudeau
2012-08-20 12:43 ` Stefano Babic
2012-08-20 12:55 ` Benoît Thébaudeau
2012-08-20 12:55 ` Stefano Babic
2012-08-20 13:12 ` Benoît Thébaudeau
2012-09-27 20:26 ` [U-Boot] [PATCH v2] " Benoît Thébaudeau
2012-10-10 11:27 ` Stefano Babic
2012-08-14 20:33 ` [U-Boot] [PATCH 7/7] mx35: Add cpu_mmc_init() Benoît Thébaudeau
2012-08-17 20:43 ` [U-Boot] [PATCH v2 " Benoît Thébaudeau
2012-08-17 21:18 ` Stefano Babic
2012-08-20 8:01 ` Stefano Babic
2012-08-20 11:50 ` Stefano Babic [this message]
2012-08-23 9:08 ` [U-Boot] [PATCH 1/7] mx35: Move clock enums to clock.h Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50322484.9050302@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.