From: Saul Wold <sgw@linux.intel.com>
To: Khem Raj <raj.khem@gmail.com>
Cc: Patches and discussions about the oe-core layer
<openembedded-core@lists.openembedded.org>
Subject: Re: Toolchain rework, call for testing
Date: Mon, 20 Aug 2012 20:35:27 -0700 [thread overview]
Message-ID: <503301FF.6060503@linux.intel.com> (raw)
In-Reply-To: <CAMKF1srjqDsesRcWP7oGzouPj9aOt_Ln0aOWE9cEQwpUQ7Unuw@mail.gmail.com>
On 08/16/2012 09:47 PM, Khem Raj wrote:
> Hi All
>
> Recently glibc build has been simplified upstream. It has dropped the
> dependency on libgcc_s and libgcc_eh for building glibc itself.
> This means that we can simplify our toolchain bootstrap a bit by
> dropping 1 of the 3 cross gcc build stages. We do not need
> gcc-cross-intermediate
> anymore. This should bring some build time reduction and simplify the
> bootstrap. I have a series of patches which I have tested
> by building core-image-minimal and meta-toolchain for all supported
> qemu architectures and also uclibc/eglibc both
> but it needs a lot more testing therefore I am calling out wider
> audience for help in testing it out.
>
> The branch is
>
> http://git.openembedded.org/openembedded-core-contrib/log/?h=kraj/toolchain-rework
>
Might be some small issues with the non-gplv3 build (test using
INCOMPATIBLE_LICENSE="GPLv3"
> ERROR: Function failed: do_compile (see /srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-non-gpl3/build/build/tmp/work/i586-poky-linux/gmp-4.2.1-r2/temp/log.do_compile.17894 for further information)
> ERROR: Logfile of failure stored in: /srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-non-gpl3/build/build/tmp/work/i586-poky-linux/gmp-4.2.1-r2/temp/log.do_compile.17894
> Log data follows:
> | DEBUG: SITE files ['endian-little', 'bit-32', 'ix86-common', 'common-linux', 'common-glibc', 'i586-linux', 'common']
> | DEBUG: Executing shell function do_compile
> | NOTE: make -j 16
> | i586-poky-linux-gcc -m32 -march=i586 --sysroot=/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-non-gpl3/build/build/tmp/sysroots/qemux86 `test -f 'gen-fac_ui.c' || echo './'`gen-fac_ui.c -o gen-fac_ui
> | i586-poky-linux-gcc -m32 -march=i586 --sysroot=/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-non-gpl3/build/build/tmp/sysroots/qemux86 `test -f 'gen-fib.c' || echo './'`gen-fib.c -o gen-fib
> | i586-poky-linux-gcc -m32 -march=i586 --sysroot=/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-non-gpl3/build/build/tmp/sysroots/qemux86 `test -f 'gen-bases.c' || echo './'`gen-bases.c -o gen-bases -lm
> | i586-poky-linux-gcc -m32 -march=i586 --sysroot=/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-non-gpl3/build/build/tmp/sysroots/qemux86 `test -f 'gen-psqr.c' || echo './'`gen-psqr.c -o gen-psqr -lm
> | ./gen-fib header 32 0 >fib_table.h || (rm -f fib_table.h; exit 1)
> | ./gen-fib table 32 0 >mpn/fib_table.c || (rm -f mpn/fib_table.c; exit 1)
> | ./gen-fac_ui 32 0 >mpz/fac_ui.h || (rm -f mpz/fac_ui.h; exit 1)
> | ./gen-bases header 32 0 >mp_bases.h || (rm -f mp_bases.h; exit 1)
> | ./gen-bases table 32 0 >mpn/mp_bases.c || (rm -f mpn/mp_bases.c; exit 1)
> | ./gen-psqr 32 0 >mpn/perfsqr.h || (rm -f mpn/perfsqr.h; exit 1)
> | ./gen-bases: error while loading shared libraries: libgcc_s.so.1: cannot open shared object file: No such file or directory
> | ./gen-bases: error while loading shared libraries: libgcc_s.so.1: cannot open shared object file: No such file or directory
> | ./gen-psqr: error while loading shared libraries: libgcc_s.so.1: cannot open shared object file: No such file or directory
> | make: *** [mp_bases.h] Error 1
> | make: *** Waiting for unfinished jobs....
> | make: *** [mpn/mp_bases.c] Error 1
> | make: *** [mpn/perfsqr.h] Error 1
> | ERROR: oe_runmake failed
> | ERROR: Function failed: do_compile (see /srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-non-gpl3/build/build/tmp/work/i586-poky-linux/gmp-4.2.1-r2/temp/log.do_compile.17894 for further information)
> NOTE: recipe gmp-4.2.1-r2: task do_compile: Failed
Older version of gmp seems to fail.
Sau!
> Thanks
>
> -Khem
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>
>
next prev parent reply other threads:[~2012-08-21 3:47 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-17 4:47 Toolchain rework, call for testing Khem Raj
2012-08-17 10:33 ` Jack Mitchell
2012-08-17 16:21 ` Christopher Larson
2012-08-21 3:35 ` Saul Wold [this message]
2012-08-21 4:35 ` Khem Raj
2012-08-21 11:55 ` Marcin Juszkiewicz
2012-08-21 12:00 ` Phil Blundell
2012-08-21 12:07 ` Martin Jansa
2012-08-21 12:23 ` Gary Thomas
2012-08-21 17:13 ` Khem Raj
2012-08-21 18:37 ` Khem Raj
2012-08-21 12:18 ` [yocto] " Martin Jansa
2012-08-21 12:18 ` Martin Jansa
2012-08-21 17:15 ` [yocto] " Khem Raj
2012-08-21 17:15 ` Khem Raj
2012-08-21 18:28 ` [yocto] " Martin Jansa
2012-08-21 18:28 ` Martin Jansa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=503301FF.6060503@linux.intel.com \
--to=sgw@linux.intel.com \
--cc=openembedded-core@lists.openembedded.org \
--cc=raj.khem@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.