Re: Raspberry Pi do_fetch failure

[Jack Mitchell <ml@communistcode.co.uk>]

On 20/08/12 18:23, Andrei Gherzan wrote:
> It seems like even if i got no feedback from github, this issue is not 
> reproducible anymore. Fetch is working as it should now. Could you 
> please confirm?
>
> Si it could have been a temporary bug or this was solved meanwhile.
>
> ag
>
>
>
>
> On Mon, Aug 13, 2012 at 9:58 PM, Andrei Gherzan <andrei@gherzan.ro 
> <mailto:andrei@gherzan.ro>> wrote:
>
>
>     On Mon, Aug 13, 2012 at 7:38 PM, Chris Tapp
>     <opensource@keylevel.com <mailto:opensource@keylevel.com>> wrote:
>
>         On 13 Aug 2012, at 15:00, Jack Mitchell wrote:
>
>         > On 13/08/12 14:51, Andrei Gherzan wrote:
>         >>
>         >> On Mon, Aug 13, 2012 at 4:34 PM, Jack Mitchell
>         <ml@communistcode.co.uk <mailto:ml@communistcode.co.uk>
>         <mailto:ml@communistcode.co.uk
>         <mailto:ml@communistcode.co.uk>>> wrote:
>         >>
>         >>    Good afternoon everyone,
>         >>
>         >>    I am trying (yet again) to get yocto to build for the
>         Raspberry Pi
>         >>    and I am falling at the do_fetch hurdle on the RasPi kernel.
>         >>
>         >>       ERROR: Fetcher failure: Fetch command export
>         HOME="/home/jack";
>         >>       export SSH_AGENT_PID="1350"; export
>         >> SSH_AUTH_SOCK="/home/jack/.cache/keyring-fjEm9a/ssh"; export
>         >>
>          GIT_CONFIG="/home/jack/Projects/poky-rasp/raspberry/tmp/sysroots/x86_64-linux/etc/gitconfig";
>         >>       export
>         >>
>          PATH="/home/jack/Projects/poky-rasp/scripts:/home/jack/Projects/poky-rasp/raspberry/tmp/sysroots/x86_64-linux/usr/bin/armv6-vfp-poky-linux-gnueabi:/home/jack/Projects/poky-rasp/raspberry/tmp/sysroots/raspberrypi/usr/bin/crossscripts:/home/jack/Projects/poky-rasp/raspberry/tmp/sysroots/x86_64-linux/usr/sbin:/home/jack/Projects/poky-rasp/raspberry/tmp/sysroots/x86_64-linux/usr/bin:/home/jack/Projects/poky-rasp/raspberry/tmp/sysroots/x86_64-linux/sbin:/home/jack/Projects/poky-rasp/raspberry/tmp/sysroots/x86_64-linux//bin:/home/jack/Projects/poky-rasp/scripts:/home/jack/Projects/poky-rasp/bitbake/bin/:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/usr/bin/core_perl";
>         >>       git clone --bare --mirror
>         >>    git://github.com/raspberrypi/linux.git
>         <http://github.com/raspberrypi/linux.git>
>         >>    <http://github.com/raspberrypi/linux.git>
>         >>
>         >>
>         >> Does this work in a shell? Just try to clone it on your
>         computer.
>         >>
>         >> ag
>         >
>         > Yes, cloning it now without issues - it took a while to get
>         going and someone has suggested that it might be timing out
>         within bitbake...
>
>
>         I've had similar issues in the past that seemed to be caused
>         by Github. If I ran a manual fetch I could see errors relating
>         to compressed folders (I think - was a while back) that
>         couldn't be found. It sorted itself after a day or so.
>
>     I sent an email to github. Will keep you posted.
>
>     ag
>
>

Working fine for me now.

-- 

   Jack Mitchell (jack@embed.me.uk)
   Embedded Systems Engineer
   http://www.embed.me.uk

--