[U-Boot] [PATCH v2 2/2] mx35 timer: Switch to 32-kHz source

[Stefano Babic <sbabic@denx.de>]

On 21/08/2012 23:07, Beno?t Th?baudeau wrote:
> Switch the mx35 timer driver to the 32-kHz clock source to avoid calling
> mxc_get_clock() again and again, and to be consistent with the timer drivers of
> other i.MX SoCs.
> 
> Signed-off-by: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com>
> Cc: Stefano Babic <sbabic@denx.de>
> ---
> Changes for v2:
>  - Fix multiline comment style.
>  - Use default SoC input clock frequency definitions instead of duplicating
>    frequency definitions in all board files.
> 
>  .../arch/arm/cpu/arm1136/mx35/timer.c              |   44 ++++++++++++--------
>  1 file changed, 27 insertions(+), 17 deletions(-)
> 
> diff --git u-boot-imx-88e73dd.orig/arch/arm/cpu/arm1136/mx35/timer.c u-boot-imx-88e73dd/arch/arm/cpu/arm1136/mx35/timer.c
> index 6000042..9680b7f 100644
> --- u-boot-imx-88e73dd.orig/arch/arm/cpu/arm1136/mx35/timer.c
> +++ u-boot-imx-88e73dd/arch/arm/cpu/arm1136/mx35/timer.c
> @@ -27,6 +27,7 @@
>  #include <asm/io.h>
>  #include <div64.h>
>  #include <asm/arch/imx-regs.h>
> +#include <asm/arch/crm_regs.h>
>  #include <asm/arch/clock.h>
>  
>  DECLARE_GLOBAL_DATA_PTR;
> @@ -37,43 +38,52 @@ DECLARE_GLOBAL_DATA_PTR;
>  /* General purpose timers bitfields */
>  #define GPTCR_SWR       (1<<15)	/* Software reset */
>  #define GPTCR_FRR       (1<<9)	/* Freerun / restart */
> -#define GPTCR_CLKSOURCE_32   (0x100<<6)	/* Clock source */
> -#define GPTCR_CLKSOURCE_IPG (0x001<<6)	/* Clock source */
> +#define GPTCR_CLKSOURCE_32   (4<<6)	/* Clock source */
>  #define GPTCR_TEN       (1)	/* Timer enable */
>  
> -#define	TIMER_FREQ_HZ	mxc_get_clock(MXC_IPG_CLK)
> -
> +/*
> + * "time" is measured in 1 / CONFIG_SYS_HZ seconds,
> + * "tick" is internal timer period
> + */
> +/* ~0.4% error - measured with stop-watch on 100s boot-delay */
>  static inline unsigned long long tick_to_time(unsigned long long tick)
>  {
>  	tick *= CONFIG_SYS_HZ;
> -	do_div(tick, TIMER_FREQ_HZ);
> +	do_div(tick, MXC_CLK32);
>  
>  	return tick;
>  }
>  
> -static inline unsigned long long us_to_tick(unsigned long long usec)
> +static inline unsigned long long us_to_tick(unsigned long long us)
>  {
> -	usec *= TIMER_FREQ_HZ;
> -	do_div(usec, 1000000);
> +	us = us * MXC_CLK32 + 999999;
> +	do_div(us, 1000000);
>  
> -	return usec;
> +	return us;
>  }
>  
> +/*
> + * nothing really to do with interrupts, just starts up a counter.
> + * The 32KHz 32-bit timer overruns in 134217 seconds
> + */
>  int timer_init(void)
>  {
>  	int i;
>  	struct gpt_regs *gpt = (struct gpt_regs *)GPT1_BASE_ADDR;
> +	struct ccm_regs *ccm = (struct ccm_regs *)CCM_BASE_ADDR;
>  
>  	/* setup GP Timer 1 */
>  	writel(GPTCR_SWR, &gpt->ctrl);
> -	for (i = 0; i < 100; i++)
> -		writel(0, &gpt->ctrl);	/* We have no udelay by now */
>  
> -	writel(0, &gpt->pre);
> -	/* Freerun Mode, PERCLK1 input */
> -	writel(readl(&gpt->ctrl) |
> -		GPTCR_CLKSOURCE_IPG | GPTCR_TEN,
> -		&gpt->ctrl);
> +	writel(readl(&ccm->cgr1) | 3 << MXC_CCM_CGR1_GPT_OFFSET, &ccm->cgr1);
> +
> +	for (i = 0; i < 100; i++)
> +		writel(0, &gpt->ctrl); /* We have no udelay by now */
> +	writel(0, &gpt->pre); /* prescaler = 1 */
> +	/* Freerun Mode, 32KHz input */
> +	writel(readl(&gpt->ctrl) | GPTCR_CLKSOURCE_32 | GPTCR_FRR,
> +			&gpt->ctrl);
> +	writel(readl(&gpt->ctrl) | GPTCR_TEN, &gpt->ctrl);
>  
>  	return 0;
>  }
> @@ -132,5 +142,5 @@ void __udelay(unsigned long usec)
>   */
>  ulong get_tbclk(void)
>  {
> -	return TIMER_FREQ_HZ;
> +	return MXC_CLK32;
>  }
> 

Acked-by: Stefano Babic <sbabic@denx.de>

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================