From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 1/4] efikamx: move and rename Efika MX directories and config files to prepare for new boards
Date: Thu, 23 Aug 2012 11:48:49 +0200 [thread overview]
Message-ID: <5035FC81.5060400@denx.de> (raw)
In-Reply-To: <1345663541-26682-1-git-send-email-matt@genesi-usa.com>
On 22/08/2012 21:25, Matt Sealey wrote:
> * Move Efika MX Smarttop and Smartbook boards into a "genesi" vendor directory
> * Rename efikamx -> mx51_efikamx since there is an mx53_efikamx and mx6_efikamx to come
>
> Signed-off-by: Matt Sealey <matt@genesi-usa.com>
> ---
> board/{efikamx => genesi/mx51_efikamx}/Makefile | 0
> .../{efikamx => genesi/mx51_efikamx}/efikamx-usb.c | 2 +-
> board/{efikamx => genesi/mx51_efikamx}/efikamx.c | 0
> .../mx51_efikamx}/imximage_mx.cfg | 0
> .../mx51_efikamx}/imximage_sb.cfg | 0
> boards.cfg | 4 ++--
> include/configs/{efikamx.h => mx51_efikamx.h} | 0
> 7 files changed, 3 insertions(+), 3 deletions(-)
> rename board/{efikamx => genesi/mx51_efikamx}/Makefile (100%)
> rename board/{efikamx => genesi/mx51_efikamx}/efikamx-usb.c (99%)
> rename board/{efikamx => genesi/mx51_efikamx}/efikamx.c (100%)
> rename board/{efikamx => genesi/mx51_efikamx}/imximage_mx.cfg (100%)
> rename board/{efikamx => genesi/mx51_efikamx}/imximage_sb.cfg (100%)
> rename include/configs/{efikamx.h => mx51_efikamx.h} (100%)
>
> diff --git a/board/efikamx/Makefile b/board/genesi/mx51_efikamx/Makefile
> similarity index 100%
> rename from board/efikamx/Makefile
> rename to board/genesi/mx51_efikamx/Makefile
> diff --git a/board/efikamx/efikamx-usb.c b/board/genesi/mx51_efikamx/efikamx-usb.c
> similarity index 99%
> rename from board/efikamx/efikamx-usb.c
> rename to board/genesi/mx51_efikamx/efikamx-usb.c
> index 618b39d..e9273d0 100644
> --- a/board/efikamx/efikamx-usb.c
> +++ b/board/genesi/mx51_efikamx/efikamx-usb.c
> @@ -33,7 +33,7 @@
> #include <usb/ulpi.h>
> #include <errno.h>
>
> -#include "../../drivers/usb/host/ehci.h"
> +#include "../../../drivers/usb/host/ehci.h"
>
> /* USB pin configuration */
> #define USB_PAD_CONFIG (PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST | \
> diff --git a/board/efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c
> similarity index 100%
> rename from board/efikamx/efikamx.c
> rename to board/genesi/mx51_efikamx/efikamx.c
> diff --git a/board/efikamx/imximage_mx.cfg b/board/genesi/mx51_efikamx/imximage_mx.cfg
> similarity index 100%
> rename from board/efikamx/imximage_mx.cfg
> rename to board/genesi/mx51_efikamx/imximage_mx.cfg
> diff --git a/board/efikamx/imximage_sb.cfg b/board/genesi/mx51_efikamx/imximage_sb.cfg
> similarity index 100%
> rename from board/efikamx/imximage_sb.cfg
> rename to board/genesi/mx51_efikamx/imximage_sb.cfg
> diff --git a/boards.cfg b/boards.cfg
> index edd750c..a9ec44b 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -215,8 +215,8 @@ integratorcp_cm946es arm arm946es integrator armltd
> ca9x4_ct_vxp arm armv7 vexpress armltd
> am335x_evm arm armv7 am335x ti am33xx
> highbank arm armv7 highbank - highbank
> -efikamx arm armv7 efikamx - mx5 efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/efikamx/imximage_mx.cfg
> -efikasb arm armv7 efikamx - mx5 efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/efikamx/imximage_sb.cfg
> +mx51_efikamx arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg
> +mx51_efikasb arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg
> mx51evk arm armv7 mx51evk freescale mx5 mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg
> mx53ard arm armv7 mx53ard freescale mx5 mx53ard:IMX_CONFIG=board/freescale/mx53ard/imximage_dd3.cfg
> mx53evk arm armv7 mx53evk freescale mx5 mx53evk:IMX_CONFIG=board/freescale/mx53evk/imximage.cfg
> diff --git a/include/configs/efikamx.h b/include/configs/mx51_efikamx.h
> similarity index 100%
> rename from include/configs/efikamx.h
> rename to include/configs/mx51_efikamx.h
>
Acked-by: Stefano Babic <sbabic@denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2012-08-23 9:48 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-22 19:25 [U-Boot] [PATCH v2 1/4] efikamx: move and rename Efika MX directories and config files to prepare for new boards Matt Sealey
2012-08-22 19:25 ` [U-Boot] [PATCH 2/4] efikamx: remove drive strength function and roll its functionality into the DCD Matt Sealey
2012-08-23 10:20 ` Stefano Babic
2012-08-27 6:16 ` Stefano Babic
2012-08-22 19:25 ` [U-Boot] [PATCH 3/4] efikamx: configure Smarttop PCBID and LED pads in DCD for convenience Matt Sealey
2012-08-23 10:20 ` Stefano Babic
2012-08-27 6:17 ` Stefano Babic
2012-08-22 19:25 ` [U-Boot] [PATCH 4/4] efikamx: update to Efika MX Smarttop and Smartbook boards Matt Sealey
2012-08-23 10:21 ` Stefano Babic
2012-08-27 6:15 ` Stefano Babic
2012-08-27 15:58 ` [U-Boot] [PATCH v2] " Matt Sealey
2012-08-27 17:36 ` Stefano Babic
2012-08-23 9:48 ` Stefano Babic [this message]
2012-08-23 10:21 ` [U-Boot] [PATCH v2 1/4] efikamx: move and rename Efika MX directories and config files to prepare for new boards Stefano Babic
2012-08-27 6:17 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5035FC81.5060400@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.