From: Ashok <ashokkourla2000@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] mx5:Use IMX_GPIO_NR macro
Date: Thu, 23 Aug 2012 22:13:57 +0530 [thread overview]
Message-ID: <50365DCD.2080408@gmail.com> (raw)
From 9f76cd6a79c6595fc058e9103d9d4eebd138a2af Mon Sep 17 00:00:00 2001
From: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
Date: Thu, 23 Aug 2012 21:24:53 +0530
Subject: [PATCH] mx5:Use IMX_GPIO_NR macro
Signed-off-by: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
---
board/freescale/mx51evk/mx51evk.c | 12 ++++++------
board/freescale/mx53ard/mx53ard.c | 8 ++++----
board/freescale/mx53evk/mx53evk.c | 8 ++++----
board/freescale/mx53loco/mx53loco.c | 8 ++++----
board/freescale/mx53smd/mx53smd.c | 4 ++--
5 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/board/freescale/mx51evk/mx51evk.c
b/board/freescale/mx51evk/mx51evk.c
index 514a7ac..55cdbed 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -319,11 +319,11 @@ static void power_init(void)
pmic_reg_write(p, REG_MODE_1, val);
mxc_request_iomux(MX51_PIN_EIM_A20, IOMUX_CONFIG_ALT1);
- gpio_direction_output(46, 0);
+ gpio_direction_output(IMX_GPIO_NR(2,14), 0);
udelay(500);
- gpio_set_value(46, 1);
+ gpio_set_value(IMX_GPIO_NR(2,14), 1);
}
#ifdef CONFIG_FSL_ESDHC
@@ -333,14 +333,14 @@ int board_mmc_getcd(struct mmc *mmc)
int ret;
mxc_request_iomux(MX51_PIN_GPIO1_0, IOMUX_CONFIG_ALT1);
- gpio_direction_input(0);
+ gpio_direction_input(IMX_GPIO_NR(1,0));
mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0);
- gpio_direction_input(6);
+ gpio_direction_input(IMX_GPIO_NR(1,6));
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
- ret = !gpio_get_value(0);
+ ret = !gpio_get_value(IMX_GPIO_NR(1,0));
else
- ret = !gpio_get_value(6);
+ ret = !gpio_get_value(IMX_GPIO_NR(1,6));
return ret;
}
diff --git a/board/freescale/mx53ard/mx53ard.c
b/board/freescale/mx53ard/mx53ard.c
index 2d21584..ee5bd43 100644
--- a/board/freescale/mx53ard/mx53ard.c
+++ b/board/freescale/mx53ard/mx53ard.c
@@ -89,14 +89,14 @@ int board_mmc_getcd(struct mmc *mmc)
int ret;
mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1);
- gpio_direction_input(1);
+ gpio_direction_input(IMX_GPIO_NR(1,1));
mxc_request_iomux(MX53_PIN_GPIO_4, IOMUX_CONFIG_ALT1);
- gpio_direction_input(4);
+ gpio_direction_input(IMX_GPIO_NR(1,4));
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
- ret = !gpio_get_value(1); /* GPIO1_1 */
+ ret = !gpio_get_value(IMX_GPIO_NR(1,1));
else
- ret = !gpio_get_value(4); /* GPIO1_4 */
+ ret = !gpio_get_value(IMX_GPIO_NR(1,4));
return ret;
}
diff --git a/board/freescale/mx53evk/mx53evk.c
b/board/freescale/mx53evk/mx53evk.c
index 8a6e31d..ed23e28 100644
--- a/board/freescale/mx53evk/mx53evk.c
+++ b/board/freescale/mx53evk/mx53evk.c
@@ -214,14 +214,14 @@ int board_mmc_getcd(struct mmc *mmc)
int ret;
mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
- gpio_direction_input(75);
+ gpio_direction_input(IMX_GPIO_NR(3,11));
mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
- gpio_direction_input(77);
+ gpio_direction_input(IMX_GPIO_NR(3,13));
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
- ret = !gpio_get_value(77); /* GPIO3_13 */
+ ret = !gpio_get_value(IMX_GPIO_NR(3,13));
else
- ret = !gpio_get_value(75); /* GPIO3_11 */
+ ret = !gpio_get_value(IMX_GPIO_NR(3,11));
return ret;
}
diff --git a/board/freescale/mx53loco/mx53loco.c
b/board/freescale/mx53loco/mx53loco.c
index cbdcfad..8cb9bd9 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -175,14 +175,14 @@ int board_mmc_getcd(struct mmc *mmc)
int ret;
mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
- gpio_direction_input(75);
+ gpio_direction_input(IMX_GPIO_NR(3,11));
mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
- gpio_direction_input(77);
+ gpio_direction_input(IMX_GPIO_NR(3,13));
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
- ret = !gpio_get_value(77); /* GPIO3_13 */
+ ret = !gpio_get_value(IMX_GPIO_NR(3,13));
else
- ret = !gpio_get_value(75); /* GPIO3_11 */
+ ret = !gpio_get_value(IMX_GPIO_NR(3,11));
return ret;
}
diff --git a/board/freescale/mx53smd/mx53smd.c
b/board/freescale/mx53smd/mx53smd.c
index c237980..cca9e99 100644
--- a/board/freescale/mx53smd/mx53smd.c
+++ b/board/freescale/mx53smd/mx53smd.c
@@ -135,8 +135,8 @@ struct fsl_esdhc_cfg esdhc_cfg[1] = {
int board_mmc_getcd(struct mmc *mmc)
{
mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
- gpio_direction_input(77);
- return !gpio_get_value(77); /* GPIO3_13 */
+ gpio_direction_input(IMX_GPIO_NR(3,13));
+ return !gpio_get_value(IMX_GPIO_NR(3,13));
}
int board_mmc_init(bd_t *bis)
--
1.7.9.5
next reply other threads:[~2012-08-23 16:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-23 16:43 Ashok [this message]
2012-08-23 16:47 ` [U-Boot] [PATCH] mx5:Use IMX_GPIO_NR macro Fabio Estevam
2012-08-27 6:04 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50365DCD.2080408@gmail.com \
--to=ashokkourla2000@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.