From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
To: Damien Cassou <damien.cassou@gmail.com>
Cc: Jingoo Han <jg1.han@samsung.com>,
linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Sachin Kamat <sachin.kamat@linaro.org>
Subject: Re: [PATCH v2] video: exynos_dp: use devm_clk_get function
Date: Thu, 23 Aug 2012 20:38:47 +0000 [thread overview]
Message-ID: <503694D7.9060407@gmx.de> (raw)
In-Reply-To: <877gti1t48.fsf@gmail.com>
On 08/01/2012 04:20 PM, Damien Cassou wrote:
> From: Damien Cassou <damien.cassou@lifl.fr>
>
> The devm_clk_get function allocates memory that is released when a driver
> detaches. This patch uses this function for data that is allocated in the probe
> function of a platform device and is only freed in the remove function.
>
> Additionally, this patch removes a null check after platform_get_resource that
> is redundant with the one done by devm_request_and_ioremap.
>
> Signed-off-by: Damien Cassou <damien.cassou@lifl.fr>
Applied.
Thanks,
Florian Tobias Schandinat
>
> ---
> Changed subject line and description
> drivers/video/exynos/exynos_dp_core.c | 27 +++++++--------------------
> 1 file changed, 7 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
> index c6c016a..00fe4f0 100644
> --- a/drivers/video/exynos/exynos_dp_core.c
> +++ b/drivers/video/exynos/exynos_dp_core.c
> @@ -872,7 +872,7 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
>
> dp->dev = &pdev->dev;
>
> - dp->clock = clk_get(&pdev->dev, "dp");
> + dp->clock = devm_clk_get(&pdev->dev, "dp");
> if (IS_ERR(dp->clock)) {
> dev_err(&pdev->dev, "failed to get clock\n");
> return PTR_ERR(dp->clock);
> @@ -881,31 +881,24 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
> clk_enable(dp->clock);
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - if (!res) {
> - dev_err(&pdev->dev, "failed to get registers\n");
> - ret = -EINVAL;
> - goto err_clock;
> - }
>
> dp->reg_base = devm_request_and_ioremap(&pdev->dev, res);
> if (!dp->reg_base) {
> dev_err(&pdev->dev, "failed to ioremap\n");
> - ret = -ENOMEM;
> - goto err_clock;
> + return -ENOMEM;
> }
>
> dp->irq = platform_get_irq(pdev, 0);
> if (!dp->irq) {
> dev_err(&pdev->dev, "failed to get irq\n");
> - ret = -ENODEV;
> - goto err_clock;
> + return -ENODEV;
> }
>
> ret = devm_request_irq(&pdev->dev, dp->irq, exynos_dp_irq_handler, 0,
> "exynos-dp", dp);
> if (ret) {
> dev_err(&pdev->dev, "failed to request irq\n");
> - goto err_clock;
> + return ret;
> }
>
> dp->video_info = pdata->video_info;
> @@ -917,7 +910,7 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
> ret = exynos_dp_detect_hpd(dp);
> if (ret) {
> dev_err(&pdev->dev, "unable to detect hpd\n");
> - goto err_clock;
> + return ret;
> }
>
> exynos_dp_handle_edid(dp);
> @@ -926,7 +919,7 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
> dp->video_info->link_rate);
> if (ret) {
> dev_err(&pdev->dev, "unable to do link train\n");
> - goto err_clock;
> + return ret;
> }
>
> exynos_dp_enable_scramble(dp, 1);
> @@ -940,17 +933,12 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
> ret = exynos_dp_config_video(dp, dp->video_info);
> if (ret) {
> dev_err(&pdev->dev, "unable to config video\n");
> - goto err_clock;
> + return ret;
> }
>
> platform_set_drvdata(pdev, dp);
>
> return 0;
> -
> -err_clock:
> - clk_put(dp->clock);
> -
> - return ret;
> }
>
> static int __devexit exynos_dp_remove(struct platform_device *pdev)
> @@ -962,7 +950,6 @@ static int __devexit exynos_dp_remove(struct platform_device *pdev)
> pdata->phy_exit();
>
> clk_disable(dp->clock);
> - clk_put(dp->clock);
>
> return 0;
> }
>
>
prev parent reply other threads:[~2012-08-23 20:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <877gti1t48.fsf@gmail.com>
2012-08-01 22:59 ` [PATCH v2] video: exynos_dp: use devm_clk_get function Jingoo Han
2012-08-01 22:59 ` Jingoo Han
2012-08-23 20:38 ` Florian Tobias Schandinat [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=503694D7.9060407@gmx.de \
--to=florianschandinat@gmx.de \
--cc=damien.cassou@gmail.com \
--cc=jg1.han@samsung.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sachin.kamat@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.