From: Evade Flow <evadeflow@gmail.com>
To: buildroot@busybox.net
Subject: [Buildroot] "Incorrect selection of the C library" with Emdebian toolchain
Date: Fri, 24 Aug 2012 09:06:48 -0400 [thread overview]
Message-ID: <50377C68.60502@gmail.com> (raw)
In-Reply-To: <5035736C.1020205@gmail.com>
I guess I'm not going to use Emdebian, afterall. :-/ I'm attempting to
use buildroot, with an external toolchain, just to build a few libraries
(glib, libdbus-1, libcap) so I can run some diagnostics on an ARM
system. Specifically, I'd like to cross-compile bustle-pcap (see
http://www.willthompson.co.uk/bustle/) and run it on a target device at
work to see what the various apps are saying to each other over D-Bus. I
don't (yet) need to build a toolchain or root fs, I'm just looking for
an easy way to cross-compile glib & friends.
When I try to do this using buildroot + Emdebian (with the hard-coded
SYSROOT_DIR 'fix' I mentioned previously), it gets quite far into the
build, but then dbus-glib blows up with the errors show below. If I
attempt the same thing using buildroot + 'Sourcery CodeBench ARM
2011.09', it works fine.
It's frustrating that Emdebian *almost* works. I can't tell whether this
problem is the tip of a very large iceberg, or something that merely
requires a few minor patches to fix. Any recommendations about how
to fix the errors below? Or is it unlikely to be worth the effort?
(I have no need to use Emdebian; I only chose it because I've used
it in the past and I'm somewhat familiar with it.)
----------
make[4]: Entering directory
`/home/evadeflow/projects/buildroot-2012.05/output/build/dbus-glib-0.98/dbus'
CC dbus-glib.lo
CC dbus-gmain.lo
CCLD libdbus-glib-1.la
CCLD dbus-binding-tool
/usr/lib/gcc/arm-linux-gnueabi/4.6/../../../../arm-linux-gnueabi/bin/ld:
warning: libffi.so.6, needed by
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgobject-2.0.so,
not found (try using -rpath or -rpath-link)
/usr/lib/gcc/arm-linux-gnueabi/4.6/../../../../arm-linux-gnueabi/bin/ld:
warning: libz.so.1, needed by
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgio-2.0.so,
not found (try using -rpath or -rpath-link)
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgobject-2.0.so:
undefined reference to `ffi_type_void'
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgobject-2.0.so:
undefined reference to `ffi_type_double'
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgobject-2.0.so:
undefined reference to `ffi_prep_cif'
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgio-2.0.so:
undefined reference to `inflate'
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgio-2.0.so:
undefined reference to `deflateSetHeader at ZLIB_1.2.2'
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgobject-2.0.so:
undefined reference to `ffi_type_sint32'
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgio-2.0.so:
undefined reference to `deflateReset'
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgio-2.0.so:
undefined reference to `deflate'
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgobject-2.0.so:
undefined reference to `ffi_type_float'
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgobject-2.0.so:
undefined reference to `ffi_type_uint64'
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgobject-2.0.so:
undefined reference to `ffi_type_sint64'
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgio-2.0.so:
undefined reference to `deflateInit2_'
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgio-2.0.so:
undefined reference to `inflateGetHeader at ZLIB_1.2.2'
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgio-2.0.so:
undefined reference to `deflateInit_'
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgobject-2.0.so:
undefined reference to `ffi_type_pointer'
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgobject-2.0.so:
undefined reference to `ffi_type_uint32'
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgio-2.0.so:
undefined reference to `inflateEnd'
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgio-2.0.so:
undefined reference to `deflateEnd'
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgio-2.0.so:
undefined reference to `inflateInit_'
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgobject-2.0.so:
undefined reference to `ffi_call'
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgio-2.0.so:
undefined reference to `inflateInit2_'
/home/evadeflow/projects/buildroot-2012.05/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/../lib/libgio-2.0.so:
undefined reference to `inflateReset'
collect2: ld returned 1 exit status
make[4]: *** [dbus-binding-tool] Error 1
make[4]: Leaving directory
`/home/evadeflow/projects/buildroot-2012.05/output/build/dbus-glib-0.98/dbus'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory
`/home/evadeflow/projects/buildroot-2012.05/output/build/dbus-glib-0.98/dbus'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory
`/home/evadeflow/projects/buildroot-2012.05/output/build/dbus-glib-0.98'
make[1]: *** [all] Error 2
make[1]: Leaving directory
`/home/evadeflow/projects/buildroot-2012.05/output/build/dbus-glib-0.98'
make: ***
[/home/evadeflow/projects/buildroot-2012.05/output/build/dbus-glib-0.98/.stamp_built]
Error 2
On 8/22/12 8:03 PM, Evade Flow wrote:
> Hi. I'm having a problem similar to one reported earlier this year (see
> http://goo.gl/lBYtC), namely: SYSROOT_DIR is being computed incorrectly
> for my external toolchain. I'm trying to use Emdebian's ARM cross
> toolchain, which I installed in my Ubuntu 12.04 VM using:
>
> sudo apt-get install gcc-4.6-arm-linux-gnueabi
>
> This puts arm-linux-gnueabi-gcc-4.6 in /usr/bin, and the dependent
> package binutils-arm-linux-gnueabi adds things like
> arm-linux-gnueabi-ar, arm-linux-gnueabi-as, etc in the same location.
> However, the latter package also drops a bunch of files in
> /usr/arm-linux-gnueabi:
>
> /usr/arm-linux-gnueabi
> |-- bin
> | |-- ar
> | |-- as
> | |-- ld
> | |-- ld.bfd
> | |-- ld.gold
> | |-- nm
> | |-- objcopy
> | |-- objdump
> | |-- ranlib
> | `-- strip
> |-- include
> | |-- aio.h
> | |-- aliases.h
> | <--SNIP!-->
> | |-- wait.h
> | |-- wchar.h
> | |-- wctype.h
> | |-- wordexp.h
> | |-- xen
> | `-- xlocale.h
> `-- lib
> |-- crt1.o
> |-- crti.o
> |-- crtn.o
> |-- gcrt1.o
> |-- ld-2.15.so
> |-- ld-linux.so.3 -> ld-2.15.so
> |-- libanl-2.15.so
> <--SNIP--!>
> |-- libstdc++.so.6 -> libstdc++.so.6.0.16
> |-- libstdc++.so.6.0.16
> |-- libthread_db-1.0.so
> |-- libthread_db.so -> libthread_db.so.1
> |-- libthread_db.so.1 -> libthread_db-1.0.so
> |-- libutil-2.15.so
> |-- libutil.a
> |-- libutil.so -> libutil.so.1
> |-- libutil.so.1 -> libutil-2.15.so
> |-- Mcrt1.o
> `-- Scrt1.o
>
> So, as near as I can tell, SYSROOT_DIR should be /usr/arm-linux-gnueabi
> for this toolchain. The following sed command in ext-tool.mk (~ line
> 311) is the problem:
>
> SYSROOT_DIR=`echo $${LIBC_A_LOCATION} | sed -r -e
> 's:usr/lib(64)?/(.*/)?libc\.a::'` ; \
>
> When the above is executed, LIBC_A_LOCATION has the value
> "/usr/arm-linux-gnueabi/lib/libc.a" so the regex doesn't match anything,
> and I get the error "Incorrect selection of the C library".
>
> For now, I've temporarily hacked ext-tool.mk to hard-code SYSROOT_DIR to
> '/usr/arm/arm-linux-gnueabi', which seems to work. Just figured I should
> tell some folks who may be able to implement a 'real' fix... :-}
prev parent reply other threads:[~2012-08-24 13:06 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-23 0:03 [Buildroot] "Incorrect selection of the C library" with Emdebian toolchain Evade Flow
2012-08-23 8:50 ` Thomas Petazzoni
2012-08-23 16:14 ` Evade Flow
2012-08-24 13:06 ` Evade Flow [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50377C68.60502@gmail.com \
--to=evadeflow@gmail.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.