All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Aníbal Almeida Pinto" <anibal.pinto@efacec.com>
To: <netdev@vger.kernel.org>
Subject: Gianfar ethernet drop package
Date: Fri, 24 Aug 2012 17:14:38 +0100	[thread overview]
Message-ID: <5037A86E.2000004@efacec.com> (raw)

Hi,

I have an board with a ppc with a 8379, kernel 3.0.39 and with a Gianfar 
Ethernet Controller Version 1.2.

When connect the board to office network the number of dropped packets 
reported by ifconfig continues to increase.

Following the test made at [1] I use tcpdump and when running it the 
number of drop packages don't have increased.

When executing ethtool eth0 -S it return a rx-dropped-by-kernel != 0. 
And the rest of drop packages

Is possible to get info why the packages are dropped?

What is the relation between ethtool rx-dropped-by-kernel and ifconfig 
drop package ?

The output from ifconfig eth0 and ethtool -S eth0 executed one after other:


# ifconfig eth0
eth0      Link encap:Ethernet  HWaddr 00:1D:11:91:00:00
           inet addr:172.18.208.187  Bcast:0.0.0.0  Mask:255.255.252.0
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:967819 errors:0 dropped:54676 overruns:0 frame:0
           TX packets:467 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:110916831 (105.7 MiB)  TX bytes:45317 (44.2 KiB)
           Base address:0x8000

ethtool -S eth0
NIC statistics:
      rx-dropped-by-kernel: 628278
      rx-large-frame-errors: 0
      rx-short-frame-errors: 0
      rx-non-octet-errors: 0
      rx-crc-errors: 0
      rx-overrun-errors: 0
      rx-busy-errors: 0
      rx-babbling-errors: 0
      rx-truncated-frames: 0
      ethernet-bus-error: 0
      tx-babbling-errors: 0
      tx-underrun-errors: 0
      rx-skb-missing-errors: 0
      tx-timeout-errors: 0
      tx-rx-64-frames: 227705
      tx-rx-65-127-frames: 743446
      tx-rx-128-255-frames: 117818
      tx-rx-256-511-frames: 43480
      tx-rx-512-1023-frames: 21406
      tx-rx-1024-1518-frames: 81741
      tx-rx-1519-1522-good-vlan: 0
      rx-bytes: 239178758
      rx-packets: 1235130
      rx-fcs-errors: 2
      receive-multicast-packet: 293898
      receive-broadcast-packet: 936991
      rx-control-frame-packets: 0
      rx-pause-frame-packets: 0
      rx-unknown-op-code: 0
      rx-alignment-error: 0
      rx-frame-length-error: 0
      rx-code-error: 0
      rx-carrier-sense-error: 1
      rx-undersize-packets: 0
      rx-oversize-packets: 0
      rx-fragmented-frames: 0
      rx-jabber-frames: 1
      rx-dropped-frames: 0
      tx-byte-counter: 51355
      tx-packets: 467
      tx-multicast-packets: 0
      tx-broadcast-packets: 132
      tx-pause-control-frames: 0
      tx-deferral-packets: 0
      tx-excessive-deferral-packets: 0
      tx-single-collision-packets: 0
      tx-multiple-collision-packets: 0
      tx-late-collision-packets: 0
      tx-excessive-collision-packets: 0
      tx-total-collision: 0
      reserved: 0
      tx-dropped-frames: 0
      tx-jabber-frames: 0
      tx-fcs-errors: 0
      tx-control-frames: 0
      tx-oversize-frames: 0
      tx-undersize-frames: 0
      tx-fragmented-frames: 0

[1] - http://www.novell.com/support/kb/doc.php?id=7007165

Thanks.

Regards,
Aníbal

             reply	other threads:[~2012-08-24 16:27 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-24 16:14 Aníbal Almeida Pinto [this message]
2012-08-24 18:17 ` Gianfar ethernet drop package Eric Dumazet
2012-08-27 10:32   ` Aníbal Almeida Pinto
2012-08-27 11:08     ` Eric Dumazet
2012-08-27 13:01       ` Aníbal Almeida Pinto
2012-08-27 13:32         ` Eric Dumazet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5037A86E.2000004@efacec.com \
    --to=anibal.pinto@efacec.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.