From mboxrd@z Thu Jan 1 00:00:00 1970 From: Who Carez? Date: Mon, 27 Aug 2012 13:28:00 +0000 Subject: [lm-sensors] Configuration file for Intel DQ67EP Mini-ITX board Message-Id: <503B75E0.8080006@pacanka.com> MIME-Version: 1 Content-Type: multipart/mixed; boundary="------------010904060108000208060502" List-Id: To: lm-sensors@vger.kernel.org This is a multi-part message in MIME format. --------------010904060108000208060502 Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: quoted-printable Hello, Attached, you will find the .conf file I use for my DQ67EP. Here are the=20 results I get, with i3-2100t. First raw: Adapter: ISA adapter in0: +0.76 V (min =3D +0.00 V, max =3D +1.74 V) in1: +0.77 V (min =3D +0.00 V, max =3D +0.00 V) ALARM in2: +3.41 V (min =3D +2.98 V, max =3D +3.63 V) in3: +3.41 V (min =3D +2.98 V, max =3D +3.63 V) in4: +1.28 V (min =3D +0.00 V, max =3D +0.00 V) ALARM in5: +1.47 V (min =3D +0.00 V, max =3D +0.00 V) ALARM in6: +1.04 V (min =3D +0.00 V, max =3D +0.00 V) ALARM in7: +3.30 V (min =3D +2.98 V, max =3D +3.63 V) in8: +3.20 V (min =3D +2.70 V, max =3D +3.30 V) fan1: 0 RPM (min =3D 0 RPM, div =3D 128) fan2: 937 RPM (min =3D 0 RPM, div =3D 32) ALARM fan3: 0 RPM (min =3D 0 RPM, div =3D 128) fan4: 0 RPM (div =3D 128) SYSTIN: +35.0=B0C (high =3D +0.0=B0C, hyst =3D +0.0=B0C) ALAR= M sensor=20 =3D diode CPUTIN: +38.0=B0C (high =3D +80.0=B0C, hyst =3D +75.0=B0C) sens= or =3D diode PECI Agent 0: +36.5=B0C (high =3D +80.0=B0C, hyst =3D +75.0=B0C) sens= or =3D=20 Intel PECI PCH_CHIP_TEMP: +51.0=B0C (high =3D +80.0=B0C, hyst =3D +75.0=B0C) PECI Agent 1: +0.0=B0C (high =3D +80.0=B0C, hyst =3D +75.0=B0C) cpu0_vid: +0.000 V intrusion0: OK and now, with the attached file: Adapter: ISA adapter Vcore: +0.77 V (min =3D +0.60 V, max =3D +1.60 V) +12V: +12.29 V (min =3D +11.14 V, max =3D +12.93 V) AVCC: +3.41 V (min =3D +2.98 V, max =3D +3.63 V) +3.3V: +3.41 V (min =3D +2.98 V, max =3D +3.63 V) +5V: +5.12 V (min =3D +4.70 V, max =3D +5.31 V) +1.5V: +1.47 V (min =3D +1.40 V, max =3D +1.60 V) PCH: +1.04 V (min =3D +0.60 V, max =3D +1.60 V) 3VSB: +3.30 V (min =3D +2.98 V, max =3D +3.63 V) Vbat: +3.20 V (min =3D +2.70 V, max =3D +3.30 V) Rear fan: 0 RPM (min =3D 251 RPM, div =3D 128) CPU fan: 958 RPM (min =3D 251 RPM, div =3D 32) DIMM temp: +36.0=B0C (high =3D +80.0=B0C, hyst =3D +75.0=B0C) sensor= =3D diode VR temp: +38.5=B0C (high =3D +80.0=B0C, hyst =3D +75.0=B0C) sensor= =3D diode CPU temp: +36.5=B0C (high =3D +80.0=B0C, hyst =3D +75.0=B0C) sensor= =3D Intel PECI PCH temp: +52.0=B0C (high =3D +80.0=B0C, hyst =3D +75.0=B0C) intrusion0: OK Please see the file. If you have any questions, just reply. :) HTH, [d] --------------010904060108000208060502 Content-Type: text/plain; charset=windows-1252; name="inteldq67ep.conf" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="inteldq67ep.conf" # Created for board DQ67EP using information from Intel Desktop Utilities and BIOS # "FRONT" and "REAR" fan labels correspond to the motherboard # headers, but not necessarily the actual fan locations. chip "nct6775-isa-0290" # Fans label fan1 "Rear fan" set fan1_min 250 # From IDU label fan2 "CPU fan" set fan2_min 250 # From IDU # There is no fan3 on the board ignore fan3 # There is no fan4 on the board ignore fan4 # Voltages # Processor Vcc label in0 "Vcore" set in0_min 0.6 # From IDU set in0_max 1.6 # From IDU # This should be "12 Volts", but computations are strange label in1 "+12V" compute in1 16*@, @/16 set in1_min 11.1 # From IDU set in1_max 12.9 # From IDU # AVCC(?) - Not shown in BIOS or IDU label in2 "AVCC" set in2_min 3.1 # same as +3.3V set in2_max 3.5 # same as +3.3V # +3.3 Volts label in3 "+3.3V" set in3_min 3.1 # from IDU set in3_max 3.5 # from IDU # +5 Volts label in4 "+5V" compute in4 4*@, @/4 set in4_min 4.7 # from IDU set in4_max 5.3 # from IDU # Memory Vcc ("SDRAM Vcc" in IDU) label in5 "+1.5V" set in5_min 1.4 # from IDU set in5_max 1.6 # from IDU # PCH Vcc label in6 "PCH" set in6_min 0.6 # from IDU set in6_max 1.6 # from IDU # +3.3 Volt Standby label in7 "3VSB" set in7_min 3.1 # from IDU set in7_max 3.5 # from IDU # VBAT(?) - Not shown in BIOS or IDU label in8 "Vbat" # It shows +2.050 V, seems to be not used ignore cpu0_vid # Temperatures # Labeled as "SYSTIN" # Guess! label temp1 "DIMM temp" set temp1_max 80 # From IDU set temp1_max_hyst 75 # From IDU # Labeled as "CPUTIN" label temp2 "VR temp" set temp2_max 80 # From IDU set temp2_max_hyst 75 # From IDU # Labeled as "PECI Agent 0" # Guess! label temp3 "CPU temp" set temp3_max 80 # From IDU set temp3_max_hyst 75 # From IDU # Labeled as "PCH_CHIP_TEMP" label temp7 "PCH temp" # Labeled as "PECI Agent 1" # Not used ignore temp8 --------------010904060108000208060502 Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors --------------010904060108000208060502--