From: David Henningsson <david.henningsson@canonical.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Takashi Iwai <tiwai@suse.de>, alsa-devel@alsa-project.org
Subject: Re: [PATCH] ALSA: hda: Make core jack usage unconditional
Date: Mon, 27 Aug 2012 16:27:55 -0700 [thread overview]
Message-ID: <503C027B.1020904@canonical.com> (raw)
In-Reply-To: <1346093603-27675-1-git-send-email-broonie@opensource.wolfsonmicro.com>
2012-08-27 11:53, Mark Brown skrev:
> Currently the HDA drivers have a Kconfig variable SND_HDA_INPUT_JACK
> which disables jack reporting via the ALSA core jack API. This is bad
> since (modulo the current problems with the HDA-specific reporting
> API) it means that all reporting mechanisms will get disabled, not just
> input.
Can you explain what other "reporting mechanisms" you are referring to?
Anyway, I don't mind this patch. As you said, if we're having a kconfig
to turn on/off reporting through the input devices, we could just as
well have it in core so it works for everyone and not just HDA.
> It's also not good that this is open coded in an individual
> driver - if it's useful to have this control it's going to be equally
> useful for any driver with jack detection support so should be handled
> in the core.
>
> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> ---
> sound/pci/hda/Kconfig | 9 +--------
> sound/pci/hda/hda_jack.c | 8 --------
> 2 files changed, 1 insertion(+), 16 deletions(-)
>
> diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
> index 194d625..2c7f626 100644
> --- a/sound/pci/hda/Kconfig
> +++ b/sound/pci/hda/Kconfig
> @@ -2,6 +2,7 @@ menuconfig SND_HDA_INTEL
> tristate "Intel HD Audio"
> select SND_PCM
> select SND_VMASTER
> + select SND_JACK if INPUT=y || INPUT=SND
> select SND_KCTL_JACK
> help
> Say Y here to include support for Intel "High Definition
> @@ -62,14 +63,6 @@ config SND_HDA_INPUT_BEEP_MODE
> Set 1 to always enable the digital beep interface for HD-audio by
> default.
>
> -config SND_HDA_INPUT_JACK
> - bool "Support jack plugging notification via input layer"
> - depends on INPUT=y || INPUT=SND
> - select SND_JACK
> - help
> - Say Y here to enable the jack plugging notification via
> - input layer.
> -
> config SND_HDA_PATCH_LOADER
> bool "Support initialization patch loading for HD-audio"
> depends on EXPERIMENTAL
> diff --git a/sound/pci/hda/hda_jack.c b/sound/pci/hda/hda_jack.c
> index aaccc02..0760d75 100644
> --- a/sound/pci/hda/hda_jack.c
> +++ b/sound/pci/hda/hda_jack.c
> @@ -109,7 +109,6 @@ EXPORT_SYMBOL_HDA(snd_hda_jack_tbl_new);
>
> void snd_hda_jack_tbl_clear(struct hda_codec *codec)
> {
> -#ifdef CONFIG_SND_HDA_INPUT_JACK
> /* free jack instances manually when clearing/reconfiguring */
> if (!codec->bus->shutdown && codec->jacktbl.list) {
> struct hda_jack_tbl *jack = codec->jacktbl.list;
> @@ -119,7 +118,6 @@ void snd_hda_jack_tbl_clear(struct hda_codec *codec)
> snd_device_free(codec->bus->card, jack->jack);
> }
> }
> -#endif
> snd_array_free(&codec->jacktbl);
> }
>
> @@ -225,16 +223,13 @@ void snd_hda_jack_report_sync(struct hda_codec *codec)
> continue;
> state = get_jack_plug_state(jack->pin_sense);
> snd_kctl_jack_report(codec->bus->card, jack->kctl, state);
> -#ifdef CONFIG_SND_HDA_INPUT_JACK
> if (jack->jack)
> snd_jack_report(jack->jack,
> state ? jack->type : 0);
> -#endif
> }
> }
> EXPORT_SYMBOL_HDA(snd_hda_jack_report_sync);
>
> -#ifdef CONFIG_SND_HDA_INPUT_JACK
> /* guess the jack type from the pin-config */
> static int get_input_jack_type(struct hda_codec *codec, hda_nid_t nid)
> {
> @@ -261,7 +256,6 @@ static void hda_free_jack_priv(struct snd_jack *jack)
> jacks->nid = 0;
> jacks->jack = NULL;
> }
> -#endif
>
> /**
> * snd_hda_jack_add_kctl - Add a kctl for the given pin
> @@ -292,7 +286,6 @@ static int __snd_hda_jack_add_kctl(struct hda_codec *codec, hda_nid_t nid,
>
> state = snd_hda_jack_detect(codec, nid);
> snd_kctl_jack_report(codec->bus->card, kctl, state);
> -#ifdef CONFIG_SND_HDA_INPUT_JACK
> if (!phantom_jack) {
> jack->type = get_input_jack_type(codec, nid);
> err = snd_jack_new(codec->bus->card, name, jack->type,
> @@ -303,7 +296,6 @@ static int __snd_hda_jack_add_kctl(struct hda_codec *codec, hda_nid_t nid,
> jack->jack->private_free = hda_free_jack_priv;
> snd_jack_report(jack->jack, state ? jack->type : 0);
> }
> -#endif
> return 0;
> }
>
--
David Henningsson, Canonical Ltd.
https://launchpad.net/~diwic
next prev parent reply other threads:[~2012-08-27 23:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-27 18:53 [PATCH] ALSA: hda: Make core jack usage unconditional Mark Brown
2012-08-27 23:27 ` David Henningsson [this message]
2012-08-28 3:23 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=503C027B.1020904@canonical.com \
--to=david.henningsson@canonical.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.