Re: Newbie question: Angstrom on at91sam9g20

[Mateusz Nowaczyk <mateusz.nowaczyk@wisene.pl>]

On 30.08.2012 10:03, Koen Kooi wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Op 29-08-12 19:25, Mateusz Nowaczyk schreef:
>> Hi, I've been using Angstrom 2011.03 (oe-classic) on a modified
>> at91sam9g20ek board. Unfortunately, it seems that it is no longer updated
>> - it contains obsolete version of dropbear (0.52) ect. I tried switching
>> to the new oe-core based version, but it lacks adequate bsp layer. I also
>> tried manually changing the opkg.conf and installing packages from
>> http://www.angstrom-distribution.org/feeds/v2012.05/ipk/eglibc/armv5te/base/
>>
>>
> but it only caused more problems (can't login at all).
>> How can i get an up-to-date Angstrom for this architecture? Should I
>> stick to the classic OE and manually update recipies, or rather create a
>> bsp layer?
>
> Create a bsp layer

OK, I found the meta-atmel layer here:
https://github.com/rascalmicro/meta-atmel

I got the following error:

~/angstrom/setup-scripts$ MACHINE=at91sam9g20ek bitbake console-image

Pseudo is not present but is required, building this first before the 
main build
ERROR: ParseError at 
/home/mn/angstrom/setup-scripts/sources/meta-atmel/recipes-bsp/u-boot/u-boot.inc:62: 
unparsed line: 'INSANE_SKIP_${PN} = True':  --:--:--
ERROR: Command execution failed: Exited with 1
Is there any way to fix it?