From: Subodh Nijsure <snijsure@grid-net.com>
To: <linux-mtd@lists.infradead.org>
Subject: RCU warning during UBI file system mount
Date: Sat, 1 Sep 2012 22:19:25 -0700 [thread overview]
Message-ID: <5042EC5D.1010207@grid-net.com> (raw)
Hello,
I am running 3.6-rc4 kernel on my MX28 based board and every time I
mount UBI file system I see following warning.
Anybody else seen this errors, particularly those running it on MXS
platform?
I haven't debugged RCU warnings before any clues as to what is the
source of this warning is, should I be looking at
start_dma_without_bch_irq() code? Would appreciate any pointers in
fixing this...
[ 4.280000] WARNING: at /opt/git/kernel-mainline/kernel/rcutiny.c:75
rcu_idle_enter_common.clone.7+0x90/0xac()
[ 4.280000] Current pid: 1 comm: swapper / Idle pid: 0 comm: swapper
[ 4.280000] Modules linked in:
[ 4.280000] [<c0014eec>] (unwind_backtrace+0x0/0x130) from
[<c001dd94>] (warn_slowpath_common+0x4c/0x64)
[ 4.280000] [<c001dd94>] (warn_slowpath_common+0x4c/0x64) from
[<c001de40>] (warn_slowpath_fmt+0x30/0x40)
[ 4.280000] [<c001de40>] (warn_slowpath_fmt+0x30/0x40) from
[<c0061618>] (rcu_idle_enter_common.clone.7+0x90/0xac)
[ 4.280000] [<c0061618>] (rcu_idle_enter_common.clone.7+0x90/0xac)
from [<c0061670>] (rcu_irq_exit+0x3c/0x78)
[ 4.280000] [<c0061670>] (rcu_irq_exit+0x3c/0x78) from [<c000fe90>]
(handle_IRQ+0x34/0x84)
[ 4.280000] [<c000fe90>] (handle_IRQ+0x34/0x84) from [<c000ec34>]
(__irq_svc+0x34/0x58)
[ 4.280000] [<c000ec34>] (__irq_svc+0x34/0x58) from [<c0394c4c>]
(schedule_timeout+0xdc/0x16c)
[ 4.280000] [<c0394c4c>] (schedule_timeout+0xdc/0x16c) from
[<c0395f34>] (wait_for_common+0xb4/0x160)
[ 4.280000] [<c0395f34>] (wait_for_common+0xb4/0x160) from
[<c02579d0>] (start_dma_without_bch_irq+0x6c/0xa8)
[ 4.280000] [<c02579d0>] (start_dma_without_bch_irq+0x6c/0xa8) from
[<c0258660>] (gpmi_send_command+0x120/0x154)
[ 4.280000] [<c0258660>] (gpmi_send_command+0x120/0x154) from
[<c0256fb4>] (gpmi_cmd_ctrl+0x44/0x6c)
[ 4.280000] [<c0256fb4>] (gpmi_cmd_ctrl+0x44/0x6c) from [<c024f8e0>]
(nand_command_lp+0xe8/0x270)
[ 4.280000] [<c024f8e0>] (nand_command_lp+0xe8/0x270) from
[<c0251e00>] (nand_do_read_ops+0x124/0x444)
[ 4.280000] [<c0251e00>] (nand_do_read_ops+0x124/0x444) from
[<c0252558>] (nand_read+0x54/0x78)
[ 4.280000] [<c0252558>] (nand_read+0x54/0x78) from [<c02499a4>]
(part_read+0x48/0x80)
[ 4.280000] [<c02499a4>] (part_read+0x48/0x80) from [<c0246910>]
(mtd_read+0x88/0xb4)
[ 4.280000] [<c0246910>] (mtd_read+0x88/0xb4) from [<c026b188>]
(ubi_io_read+0xb0/0x3e8)
[ 4.280000] [<c026b188>] (ubi_io_read+0xb0/0x3e8) from [<c026740c>]
(ubi_eba_read_leb+0x198/0x4bc)
[ 4.280000] [<c026740c>] (ubi_eba_read_leb+0x198/0x4bc) from
[<c0266800>] (ubi_leb_read+0xf4/0x16c)
[ 4.280000] [<c0266800>] (ubi_leb_read+0xf4/0x16c) from [<c0155550>]
(ubifs_leb_read+0x24/0x88)
[ 4.280000] [<c0155550>] (ubifs_leb_read+0x24/0x88) from [<c01572f8>]
(ubifs_read_node+0xa8/0x2e4)
[ 4.280000] [<c01572f8>] (ubifs_read_node+0xa8/0x2e4) from
[<c0153c50>] (ubifs_read_sb_node+0x54/0x78)
[ 4.280000] [<c0153c50>] (ubifs_read_sb_node+0x54/0x78) from
[<c0154940>] (ubifs_read_superblock+0xc8c/0x133c)
[ 4.280000] [<c0154940>] (ubifs_read_superblock+0xc8c/0x133c) from
[<c01520ac>] (ubifs_mount+0x73c/0x1bc0)
[ 4.280000] [<c01520ac>] (ubifs_mount+0x73c/0x1bc0) from [<c00a49ec>]
(mount_fs+0x44/0x184)
[ 4.280000] [<c00a49ec>] (mount_fs+0x44/0x184) from [<c00baf90>]
(vfs_kern_mount+0x4c/0xc0)
[ 4.280000] [<c00baf90>] (vfs_kern_mount+0x4c/0xc0) from [<c00bb1a0>]
(do_kern_mount+0x34/0xd0)
[ 4.280000] [<c00bb1a0>] (do_kern_mount+0x34/0xd0) from [<c00bc93c>]
(do_mount+0x15c/0x73c)
[ 4.280000] [<c00bc93c>] (do_mount+0x15c/0x73c) from [<c00bcfa0>]
(sys_mount+0x84/0xc4)
[ 4.280000] [<c00bcfa0>] (sys_mount+0x84/0xc4) from [<c04e4a04>]
(do_mount_root+0x24/0xb0)
[ 4.280000] [<c04e4a04>] (do_mount_root+0x24/0xb0) from [<c04e4b78>]
(mount_block_root+0xe8/0x214)
[ 4.280000] [<c04e4b78>] (mount_block_root+0xe8/0x214) from
[<c04e4e28>] (prepare_namespace+0x8c/0x180)
[ 4.280000] [<c04e4e28>] (prepare_namespace+0x8c/0x180) from
[<c04e4894>] (kernel_init+0x16c/0x1b4)
[ 4.280000] [<c04e4894>] (kernel_init+0x16c/0x1b4) from [<c000ff70>]
(kernel_thread_exit+0x0/0x8)
[ 4.280000] ---[ end trace 4d36b722759fdc4f ]---
[ 4.950000] UBIFS DBG (pid 58): ubifs_bg_thread: background thread
"ubifs_bgt0_0" started, PID 58
-Subodh
next reply other threads:[~2012-09-02 5:25 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-02 5:19 Subodh Nijsure [this message]
2012-09-04 7:46 ` RCU warning during UBI file system mount Artem Bityutskiy
2012-09-04 14:48 ` Paul E. McKenney
2012-09-04 14:48 ` Paul E. McKenney
2012-09-04 15:43 ` Subodh Nijsure
2012-09-04 15:43 ` Subodh Nijsure
2012-09-04 15:43 ` Subodh Nijsure
2012-09-04 19:54 ` Paul E. McKenney
2012-09-04 19:54 ` Paul E. McKenney
2012-09-04 19:54 ` Paul E. McKenney
2012-09-05 3:51 ` Shawn Guo
2012-09-05 3:51 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5042EC5D.1010207@grid-net.com \
--to=snijsure@grid-net.com \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.