All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jaehoon Chung <jh80.chung@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [U-BOOT][PATCH] mmc: support the revision check for eMMC4.5
Date: Mon, 03 Sep 2012 14:32:38 +0900	[thread overview]
Message-ID: <504440F6.7020108@samsung.com> (raw)
In-Reply-To: <201209010815.27149.marek.vasut@gmail.com>

Hi Marek,

I will resend this patch with Andy's comment.
If you have any other opinion, let me know plz.

Best Regards,
Jaehoon Chung

On 09/01/2012 03:15 PM, Marek Vasut wrote:
> Dear Jae hoon Chung,
> 
>> Hi,
>>
>> Anybody think about this patch?
>> mmcinfo is produce correctly?
>>
>> if i miss something, let me know, plz.
> 
> Andy?
> 
>> Best Regards,
>> Jaehoon Chung
>>
>> 2012/3/27 Jaehoon Chung <jh80.chung@samsung.com>:
>>> eMMC card is introduced the eMMC4.5.
>>> But now eMMC card is checked up to eMMC4.0.
>>> This patch is supported until eMMC4.5
>>>
>>> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
>>> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
>>> ---
>>>  common/cmd_mmc.c  |    5 ++++-
>>>  drivers/mmc/mmc.c |   25 +++++++++++++++++++++++++
>>>  include/mmc.h     |    8 ++++++++
>>>  3 files changed, 37 insertions(+), 1 deletions(-)
>>>
>>> diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
>>> index 8f13c22..ff150ca 100644
>>> --- a/common/cmd_mmc.c
>>> +++ b/common/cmd_mmc.c
>>> @@ -106,7 +106,10 @@ static void print_mmcinfo(struct mmc *mmc)
>>>        printf("Rd Block Len: %d\n", mmc->read_bl_len);
>>>
>>>        printf("%s version %d.%d\n", IS_SD(mmc) ? "SD" : "MMC",
>>> -                       (mmc->version >> 4) & 0xf, mmc->version & 0xf);
>>> +                       (mmc->version >> 4) & 0xf,
>>> +                       (mmc->version & 0xf) == EXT_CSD_REV_1_5 ?
>>> +                       41 :((mmc->version & 0xf) > EXT_CSD_REV_1_5 ?
>>> +                       (mmc->version & 0xf) - 1 : (mmc->version &
>>> 0xf)));
>>>
>>>        printf("High Capacity: %s\n", mmc->high_capacity ? "Yes" : "No");
>>>        puts("Capacity: ");
>>> diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
>>> index 49c3349..e035012 100644
>>> --- a/drivers/mmc/mmc.c
>>> +++ b/drivers/mmc/mmc.c
>>> @@ -651,6 +651,31 @@ int mmc_change_freq(struct mmc *mmc)
>>>        if (err)
>>>                return err;
>>>
>>> +       switch (ext_csd[EXT_CSD_REV]) {
>>> +       case EXT_CSD_REV_1_0:
>>> +               mmc->version |= EXT_CSD_REV_1_0;
>>> +               break;
>>> +       case EXT_CSD_REV_1_1:
>>> +               mmc->version |= EXT_CSD_REV_1_1;
>>> +               break;
>>> +       case EXT_CSD_REV_1_2:
>>> +               mmc->version |= EXT_CSD_REV_1_2;
>>> +               break;
>>> +       case EXT_CSD_REV_1_3:
>>> +               mmc->version |= EXT_CSD_REV_1_3;
>>> +               break;
>>> +       case EXT_CSD_REV_1_5:
>>> +               mmc->version |= EXT_CSD_REV_1_5;
>>> +               break;
>>> +       case EXT_CSD_REV_1_6:
>>> +               mmc->version |= EXT_CSD_REV_1_6;
>>> +               break;
>>> +       case EXT_CSD_REV_1_4:
>>> +       default:
>>> +               printf("Unknown revision - %x\n", ext_csd[EXT_CSD_REV]);
>>> +               return 0;
>>> +       }
>>> +
>>>        /* No high-speed support */
>>>        if (!ext_csd[EXT_CSD_HS_TIMING])
>>>                return 0;
>>> diff --git a/include/mmc.h b/include/mmc.h
>>> index 30c2375..726da99 100644
>>> --- a/include/mmc.h
>>> +++ b/include/mmc.h
>>> @@ -157,6 +157,14 @@
>>>  #define EXT_CSD_SEC_CNT                        212     /* RO, 4 bytes */
>>>  #define EXT_CSD_HC_ERASE_GRP_SIZE      224     /* RO */
>>>
>>> +#define EXT_CSD_REV_1_0                        0
>>> +#define EXT_CSD_REV_1_1                        1
>>> +#define EXT_CSD_REV_1_2                        2
>>> +#define EXT_CSD_REV_1_3                        3
>>> +#define EXT_CSD_REV_1_4                        4
>>> +#define EXT_CSD_REV_1_5                        5
>>> +#define EXT_CSD_REV_1_6                        6
>>> +
>>>  /*
>>>  * EXT_CSD field definitions
>>>  */
>>> --
>>> 1.7.4.1
>>> _______________________________________________
>>> U-Boot mailing list
>>> U-Boot at lists.denx.de
>>> http://lists.denx.de/mailman/listinfo/u-boot
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
> 

      reply	other threads:[~2012-09-03  5:32 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-03-27  7:16 [U-Boot] [U-BOOT][PATCH] mmc: support the revision check for eMMC4.5 Jaehoon Chung
2012-04-02 18:35 ` Jae hoon Chung
2012-09-01  6:15   ` Marek Vasut
2012-09-03  5:32     ` Jaehoon Chung [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=504440F6.7020108@samsung.com \
    --to=jh80.chung@samsung.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.