All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: AnilKumar Ch <anilkumar@ti.com>
Cc: wg@grandegger.com, linux-can@vger.kernel.org,
	linux-omap@vger.kernel.org, anantgole@ti.com, nsekhar@ti.com
Subject: Re: [PATCH v9] can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller
Date: Mon, 03 Sep 2012 10:52:22 +0200	[thread overview]
Message-ID: <50446FC6.2020203@pengutronix.de> (raw)
In-Reply-To: <1345461654-439-1-git-send-email-anilkumar@ti.com>

[-- Attachment #1: Type: text/plain, Size: 6581 bytes --]

On 08/20/2012 01:20 PM, AnilKumar Ch wrote:
> Add Runtime PM support to C_CAN/D_CAN controller. The runtime PM
> APIs control clocks for C_CAN/D_CAN IP and prevent access to the
> register of C_CAN/D_CAN IP when clock is turned off.
> 
> Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
> ---
> This patch has been tested on AM335X EVM. Due to lack of hardware
> I am not able to test c_can functionality. I appreciate if anyone
> can test c_can functionality with this patch.

Looks good. I've marked the c_can_priv *priv pointer as const in
c_can_pm_runtime_{get,put}_sync.

thanks, Marc

> 
> This patch is based on "can-next/master" 
> 
> Changes from v8:
> 	- corrected the return path sequence in c_can_probe()
> 
> Changes from v7:
> 	- Incorporated Marc's comments on v7
> 	  * changed device pointer to c_can_priv pointer
> 
> Changes from v6:
> 	- Incorporated Marc's comments on v6
> 	  * changed dev pointer to priv
> 	  * removed platform_device.h include from c_can.c
> 
> Changes from v5:
> 	- Incorporated Marc's comments on v5
> 	  * changed runtime pm calls in c_can driver to handle
> 	    the drivers which are not using platform drivers.
> 	  * added device pointer protection in c_can driver if
> 	    not passed from platform/pci driver.
> 
> Changes from v4:
> 	- Incorporated Vaibhav H review comments on v4.
> 	  * Moved pm_runtime put/get_sync calls to appropriate positions.
> 	- This patch is from "Add DT support to C_CAN/D_CAN controller"
> 	  patch series. Rest of the patches in this series were applied
> 	  so this v5 contains only this patch.
> 
>  drivers/net/can/c_can/c_can.c          |   24 +++++++++++++++++++++++-
>  drivers/net/can/c_can/c_can.h          |    1 +
>  drivers/net/can/c_can/c_can_platform.c |   11 +++++++++--
>  3 files changed, 33 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
> index 4c538e3..966d318 100644
> --- a/drivers/net/can/c_can/c_can.c
> +++ b/drivers/net/can/c_can/c_can.c
> @@ -34,6 +34,7 @@
>  #include <linux/if_ether.h>
>  #include <linux/list.h>
>  #include <linux/io.h>
> +#include <linux/pm_runtime.h>
>  
>  #include <linux/can.h>
>  #include <linux/can/dev.h>
> @@ -201,6 +202,18 @@ static const struct can_bittiming_const c_can_bittiming_const = {
>  	.brp_inc = 1,
>  };
>  
> +static inline void c_can_pm_runtime_get_sync(struct c_can_priv *priv)

I've marked the priv pointer as const.

> +{
> +	if (priv->device)
> +		pm_runtime_get_sync(priv->device);
> +}
> +
> +static inline void c_can_pm_runtime_put_sync(struct c_can_priv *priv)

dito.

> +{
> +	if (priv->device)
> +		pm_runtime_put_sync(priv->device);
> +}
> +
>  static inline int get_tx_next_msg_obj(const struct c_can_priv *priv)
>  {
>  	return (priv->tx_next & C_CAN_NEXT_MSG_OBJ_MASK) +
> @@ -673,11 +686,15 @@ static int c_can_get_berr_counter(const struct net_device *dev,
>  	unsigned int reg_err_counter;
>  	struct c_can_priv *priv = netdev_priv(dev);
>  
> +	c_can_pm_runtime_get_sync(priv);
> +
>  	reg_err_counter = priv->read_reg(priv, C_CAN_ERR_CNT_REG);
>  	bec->rxerr = (reg_err_counter & ERR_CNT_REC_MASK) >>
>  				ERR_CNT_REC_SHIFT;
>  	bec->txerr = reg_err_counter & ERR_CNT_TEC_MASK;
>  
> +	c_can_pm_runtime_put_sync(priv);
> +
>  	return 0;
>  }
>  
> @@ -1053,11 +1070,13 @@ static int c_can_open(struct net_device *dev)
>  	int err;
>  	struct c_can_priv *priv = netdev_priv(dev);
>  
> +	c_can_pm_runtime_get_sync(priv);
> +
>  	/* open the can device */
>  	err = open_candev(dev);
>  	if (err) {
>  		netdev_err(dev, "failed to open can device\n");
> -		return err;
> +		goto exit_open_fail;
>  	}
>  
>  	/* register interrupt handler */
> @@ -1079,6 +1098,8 @@ static int c_can_open(struct net_device *dev)
>  
>  exit_irq_fail:
>  	close_candev(dev);
> +exit_open_fail:
> +	c_can_pm_runtime_put_sync(priv);
>  	return err;
>  }
>  
> @@ -1091,6 +1112,7 @@ static int c_can_close(struct net_device *dev)
>  	c_can_stop(dev);
>  	free_irq(dev->irq, dev);
>  	close_candev(dev);
> +	c_can_pm_runtime_put_sync(priv);
>  
>  	return 0;
>  }
> diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
> index 4e56baa..1437a6d 100644
> --- a/drivers/net/can/c_can/c_can.h
> +++ b/drivers/net/can/c_can/c_can.h
> @@ -153,6 +153,7 @@ struct c_can_priv {
>  	struct can_priv can;	/* must be the first member */
>  	struct napi_struct napi;
>  	struct net_device *dev;
> +	struct device *device;
>  	int tx_object;
>  	int current_status;
>  	int last_status;
> diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
> index d0a66cf..90801c4 100644
> --- a/drivers/net/can/c_can/c_can_platform.c
> +++ b/drivers/net/can/c_can/c_can_platform.c
> @@ -32,6 +32,7 @@
>  #include <linux/clk.h>
>  #include <linux/of.h>
>  #include <linux/of_device.h>
> +#include <linux/pm_runtime.h>
>  
>  #include <linux/can/dev.h>
>  
> @@ -177,8 +178,11 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
>  		goto exit_free_device;
>  	}
>  
> +	pm_runtime_enable(&pdev->dev);
> +
>  	dev->irq = irq;
>  	priv->base = addr;
> +	priv->device = &pdev->dev;
>  	priv->can.clock.freq = clk_get_rate(clk);
>  	priv->priv = clk;
>  
> @@ -189,15 +193,17 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
>  	if (ret) {
>  		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
>  			KBUILD_MODNAME, ret);
> -		goto exit_free_device;
> +		goto exit_clear_drvdata;
>  	}
>  
>  	dev_info(&pdev->dev, "%s device registered (regs=%p, irq=%d)\n",
>  		 KBUILD_MODNAME, priv->base, dev->irq);
>  	return 0;
>  
> -exit_free_device:
> +exit_clear_drvdata:
>  	platform_set_drvdata(pdev, NULL);
> +	pm_runtime_disable(&pdev->dev);
> +exit_free_device:
>  	free_c_can_dev(dev);
>  exit_iounmap:
>  	iounmap(addr);
> @@ -226,6 +232,7 @@ static int __devexit c_can_plat_remove(struct platform_device *pdev)
>  	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	release_mem_region(mem->start, resource_size(mem));
>  
> +	pm_runtime_disable(&pdev->dev);
>  	clk_put(priv->priv);
>  
>  	return 0;
> 


-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 259 bytes --]

  parent reply	other threads:[~2012-09-03  8:52 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-20 11:20 [PATCH v9] can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller AnilKumar Ch
2012-08-27  5:06 ` AnilKumar, Chimata
2012-09-03  8:52 ` Marc Kleine-Budde [this message]
2012-09-03 10:52   ` AnilKumar, Chimata
2012-09-06 23:37 ` Kevin Hilman
2012-09-07  3:28   ` AnilKumar, Chimata
2012-09-07 21:01     ` Kevin Hilman
2012-09-10 10:44       ` AnilKumar, Chimata

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50446FC6.2020203@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=anantgole@ti.com \
    --cc=anilkumar@ti.com \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=nsekhar@ti.com \
    --cc=wg@grandegger.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.