Re: [Qemu-devel] [PATCH 2/2] pc: remove DEBUG_BIOS define and QEMU exit I/O ports

["Hervé Poussineau" <hpoussin@reactos.org>]

Andreas Färber a écrit :
> Am 01.08.2012 17:48, schrieb Hervé Poussineau:
>> Anthony Liguori a écrit :
>>> Hervé Poussineau <hpoussin@reactos.org> writes:
>>>
>>>> Anthony Liguori a écrit :
>>>>> On 07/06/2012 04:53 PM, Hervé Poussineau wrote:
>>>>>> QEMU exit (which can be guest triggered) can be replaced by:
>>>>>> -device isa-debugexit,iobase=0x501
>>>>>> -device isa-debugexit,iobase=0x501,access-size=2
>>>>>> -device isa-debugexit,iobase=0x502,access-size=2
>>>>>>
>> [...]
>>
>>>> However, for current ones (1.2 or later), I don't want to have them
>>>> by default as it is an QEMU exit which is guest triggerable.
>>>> Will you accept this approach, where your regression suite will require
>>>> a new parameter "-device isa-debugexit,iobase=0x501" ?
>>> Yes although I'd prefer the iobase not be required to be explicitly
>>> specified.
>> Which one are you using? iobase 0x501 or 0x502? And with access size 1
>> or 2?
> 
> This discussion seems to have died out without result... Hervé, do you
> have a newer patchset with either of the two default addresses?
> 
> Andreas
> 

I may only need to change the default iobase and access-size values in 
first patch. They are currently at 0x501 with an access size of 1, but I 
got no answer from Anthony if those are the values he wants.

Hervé