All of lore.kernel.org
 help / color / mirror / Atom feed
From: "tiejun.chen" <tiejun.chen@windriver.com>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Subject: Re: [v3][PATCH 2/3] ppc/kprobe: complete kprobe and migrate exception frame
Date: Thu, 13 Sep 2012 18:36:57 +0800	[thread overview]
Message-ID: <5051B749.5040606@windriver.com> (raw)
In-Reply-To: <1347446296.2276.0.camel@pasglop>

On 09/12/2012 06:38 PM, Benjamin Herrenschmidt wrote:
> On Wed, 2012-09-12 at 16:55 +0800, tiejun.chen wrote:
>>> to worry about nor stack frame to create etc...
>>
>> If you don't like this v4, let me know and then I can go back memcpy
>> for next
>> version.
>
> Just open code the whole copy. It should be easy really. As I said, you
> have the src and dst already in registers and you know they are aligned,
> so just put the size of the frame in a register (divided by 4), do an
> mtctr and do a little load_update/store_update loop to do the copy, all
> in the asm.

Is the following Okay?

---
  arch/powerpc/kernel/entry_32.S |   55 +++++++++++++++++++++++++++++++++++-----
  arch/powerpc/kernel/entry_64.S |   45 ++++++++++++++++++++++++++++++++
  2 files changed, 94 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index ead5016..3b56bba 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -32,6 +32,7 @@
  #include <asm/unistd.h>
  #include <asm/ftrace.h>
  #include <asm/ptrace.h>
+#include <asm/cache.h>

  #undef SHOW_SYSCALLS
  #undef SHOW_SYSCALLS_TASK
@@ -831,19 +832,63 @@ restore_user:
  	bnel-	load_dbcr0
  #endif

-#ifdef CONFIG_PREEMPT
  	b	restore

  /* N.B. the only way to get here is from the beq following ret_from_except. */
  resume_kernel:
-	/* check current_thread_info->preempt_count */
+	/* check current_thread_info, _TIF_EMULATE_STACK_STORE */
  	CURRENT_THREAD_INFO(r9, r1)
+	lwz	r8,TI_FLAGS(r9)
+	andis.	r8,r8,_TIF_EMULATE_STACK_STORE@h
+	beq+	1f
+
+	addi	r8,r1,INT_FRAME_SIZE	/* Get the kprobed function entry */
+
+	lwz	r3,GPR1(r1)
+	subi	r3,r3,INT_FRAME_SIZE	/* dst: Allocate a trampoline exception frame */
+	mr	r4,r1			/* src:  current exception frame */
+	li	r5,INT_FRAME_SIZE	/* size: INT_FRAME_SIZE */
+	li	r6,0			/* start offset: 0 */
+	mr	r1,r3			/* Reroute the trampoline frame to r1 */
+
+	/* Copy from the original to the trampoline. */
+	addi	r5,r5,-4
+	addi	r6,r6,-4
+4:	li	r0,L1_CACHE_BYTES/4
+	mtctr	r0
+3:	addi	r6,r6,4			/* copy a cache line */
+	lwzx	r0,r6,r4
+	stwx	r0,r6,r3
+	bdnz	3b
+	dcbst	r6,r3			/* write it to memory */
+	sync
+	cmplw	0,r6,r5
+	blt	4b
+
+	/* Do real store operation to complete stwu */
+	lwz	r5,GPR1(r1)
+	stw	r8,0(r5)
+
+	/* Clear _TIF_EMULATE_STACK_STORE flag */
+	lis	r11,_TIF_EMULATE_STACK_STORE@h
+	addi	r5,r9,TI_FLAGS
+0:	lwarx	r8,0,r5
+	andc	r8,r8,r11
+#ifdef CONFIG_IBM405_ERR77
+	dcbt	0,r5
+#endif
+	stwcx.	r8,0,r5
+	bne-	0b
+1:
+
+#ifdef CONFIG_PREEMPT
+	/* check current_thread_info->preempt_count */
  	lwz	r0,TI_PREEMPT(r9)
  	cmpwi	0,r0,0		/* if non-zero, just restore regs and return */
  	bne	restore
-	lwz	r0,TI_FLAGS(r9)
-	andi.	r0,r0,_TIF_NEED_RESCHED
+	andi.	r8,r8,_TIF_NEED_RESCHED
  	beq+	restore
+	lwz	r3,_MSR(r1)
  	andi.	r0,r3,MSR_EE	/* interrupts off? */
  	beq	restore		/* don't schedule if so */
  #ifdef CONFIG_TRACE_IRQFLAGS
@@ -864,8 +909,6 @@ resume_kernel:
  	 */
  	bl	trace_hardirqs_on
  #endif
-#else
-resume_kernel:
  #endif /* CONFIG_PREEMPT */

  	/* interrupts are hard-disabled at this point */
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index b40e0b4..cc43b64 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -593,6 +593,51 @@ _GLOBAL(ret_from_except_lite)
  	b	.ret_from_except

  resume_kernel:
+	/* check current_thread_info, _TIF_EMULATE_STACK_STORE */
+	CURRENT_THREAD_INFO(r9, r1)
+	ld	r8,TI_FLAGS(r9)
+	andis.	r8,r8,_TIF_EMULATE_STACK_STORE@h
+	beq+	1f
+
+	addi	r8,r1,INT_FRAME_SIZE	/* Get the kprobed function entry */
+
+	lwz	r3,GPR1(r1)
+	subi	r3,r3,INT_FRAME_SIZE	/* dst: Allocate a trampoline exception frame */
+	mr	r4,r1			/* src:  current exception frame */
+	li	r5,INT_FRAME_SIZE	/* size: INT_FRAME_SIZE */
+	li	r6,0			/* start offset: 0 */
+	mr	r1,r3			/* Reroute the trampoline frame to r1 */
+
+	/* Copy from the original to the trampoline. */
+	addi	r5,r5,-8
+	addi	r6,r6,-8
+4:	li	r0,8
+	mtctr	r0	
+3:	addi	r6,r6,8			/* copy a cache line		*/
+	ldx	r0,r6,r4
+	stdx	r0,r6,r3
+	bdnz	3b
+	dcbst	r6,r3			/* write it to memory		*/
+	sync
+	cmpld	0,r6,r5
+	blt	4b
+	sync
+
+	bl	.copy_and_flush
+
+	/* Do real store operation to complete stwu */
+	lwz	r5,GPR1(r1)
+	std	r8,0(r5)
+
+	/* Clear _TIF_EMULATE_STACK_STORE flag */
+	lis	r11,_TIF_EMULATE_STACK_STORE@h
+	addi	r5,r9,TI_FLAGS
+	ldarx	r4,0,r5
+	andc	r4,r4,r11
+	stdcx.	r4,0,r5
+	bne-	0b
+1:
+
  #ifdef CONFIG_PREEMPT
  	/* Check if we need to preempt */
  	andi.	r0,r4,_TIF_NEED_RESCHED
-- 
1.7.9.5

Tiejun

  reply	other threads:[~2012-09-13 11:00 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-11  2:20 [v3][PATCH 1/3] powerpc/kprobe: introduce a new thread flag Tiejun Chen
2012-09-11  2:20 ` [v3][PATCH 2/3] ppc/kprobe: complete kprobe and migrate exception frame Tiejun Chen
2012-09-11  5:51   ` Benjamin Herrenschmidt
2012-09-12  8:38     ` tiejun.chen
2012-09-12  8:43       ` Benjamin Herrenschmidt
2012-09-12  8:55         ` tiejun.chen
2012-09-12 10:38           ` Benjamin Herrenschmidt
2012-09-13 10:36             ` tiejun.chen [this message]
2012-09-13 21:42               ` Benjamin Herrenschmidt
2012-09-11  2:20 ` [v3][PATCH 3/3] ppc/kprobe: don't emulate store when kprobe stwu r1 Tiejun Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5051B749.5040606@windriver.com \
    --to=tiejun.chen@windriver.com \
    --cc=benh@kernel.crashing.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.