From: Jack Mitchell <ml@communistcode.co.uk>
To: openembedded-devel@lists.openembedded.org
Subject: Re: package gobject-introspection-native-0.9.10-r1: task do_compile: Failed
Date: Mon, 17 Sep 2012 14:48:33 +0100 [thread overview]
Message-ID: <50572A31.90206@communistcode.co.uk> (raw)
In-Reply-To: <CALEMqRG1qnHH-whuSm4fhB9x3jS4qS=6wukswge0phcWoOWG9A@mail.gmail.com>
On 17/09/12 14:13, Lucas wrote:
> Hello list,
>
> excuse me, but I am fairly inexperienced developing with openembedded. I am
> trying to build the beagleboard-demo-image, but get an error and I am not
> sure how to go about fixing it. Could you please advice on how/where I have
> to look to fix the problem. The OpenEmbedded build process is still a
> little unclear to me, so I am not sure where to start. I would be grateful
> for any leads and advice. I updated OpenEmbedded just now before building.
> Below you find the complete output:
>
> lucas@ubuntu:~/Work/oe$ bitbake beagleboard-demo-image
> Loading cache: 100%
> |#############################################################################################################################################|
> Time: 00:00:09
> Loaded 7101 entries from dependency cache.
> NOTE: angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been
> replaced by
> bluez4
> | ETA: 00:02:27
> NOTE: angstrom DOES NOT support fso-apm because regular apmd is good
> enough
> | ETA: 00:02:06
> NOTE: angstrom DOES NOT support bluez-utils because bluez-utils 3.x has
> been replaced by
> bluez4 |
> ETA: 00:01:45
> NOTE: angstrom DOES NOT support ffmpeg because libav is the preferred
> multimedia
> library
> | ETA: 00:01:18
> NOTE: angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been
> replaced by
> bluez4
> | ETA: 00:01:01
> NOTE: angstrom DOES NOT support libiconv because the glibc builtin iconv
> replacement is
> used |
> ETA: 00:00:57
> NOTE: angstrom DOES NOT support xcursor-watchonly-theme because
> xcursor-transparent-theme is good
> enough | ETA:
> 00:00:49
> NOTE: angstrom DOES NOT support hotplug-ng because hotplug functionality is
> provided by
> udev |
> ETA: 00:00:44
> NOTE: angstrom DOES NOT support bluez-utils because bluez-utils 3.x has
> been replaced by
> bluez4 |
> ETA: 00:00:43
> NOTE: angstrom DOES NOT support hotplug2 because hotplug functionality is
> provided by
> udev
> | ETA: 00:00:42
> NOTE: angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been
> replaced by
> bluez4
> | ETA: 00:00:35
> NOTE: angstrom DOES NOT support ffmpeg because libav is the preferred
> multimedia
> library#######
> | ETA: 00:00:28
> NOTE: angstrom DOES NOT support linux-hotplug because hotplug functionality
> is provided by
> udev### |
> ETA: 00:00:26
> NOTE: angstrom DOES NOT support bash-noemu because doesn't work on the
> target################################
> | ETA: 00:00:22
> NOTE: angstrom DOES NOT support libiconv because the glibc builtin iconv
> replacement is
> used##################### |
> ETA: 00:00:21
> NOTE: angstrom DOES NOT support hotplug-ng because hotplug functionality is
> provided by
> udev########################################## |
> ETA: 00:00:12
> NOTE: angstrom DOES NOT support ffmpeg because libav is the preferred
> multimedia
> library##################################################
> | ETA: 00:00:10
> NOTE: angstrom DOES NOT support ffmpeg because libav is the preferred
> multimedia
> library#####################################################
> | ETA: 00:00:08
> NOTE: angstrom DOES NOT support linux-hotplug because hotplug functionality
> is provided by
> udev#################################################### |
> ETA: 00:00:06
> NOTE: angstrom DOES NOT support ipkg because ipkg has been superseded by
> opkg#######################################################################
> | ETA: 00:00:05
> NOTE: angstrom DOES NOT support libiconv because the glibc builtin iconv
> replacement is
> used############################################################# |
> ETA: 00:00:03
> Parsing recipes: 100%
> |###########################################################################################################################################|
> Time: 00:00:57
> Parsing of 7216 .bb files complete (6455 cached, 761 parsed). 7885 targets,
> 310 skipped, 0 masked, 0 errors.
>
> Build Configuration:
> BB_VERSION = "1.12.0"
> METADATA_BRANCH = "master"
> METADATA_REVISION = "c1f52c5"
> TARGET_ARCH = "arm"
> TARGET_OS = "linux-gnueabi"
> MACHINE = "beagleboard"
> DISTRO = "angstrom"
> DISTRO_VERSION = "v2012.09"
> TARGET_FPU = "hard"
>
> NOTE: Resolving any missing task queue dependencies
> NOTE: multiple providers are available for runtime x11vnc (x11vnc,
> libvncserver)
> NOTE: consider defining a PREFERRED_PROVIDER entry to match x11vnc
> NOTE: multiple providers are available for runtime gnash-browser-plugin
> (gnash, gnash-fb)
> NOTE: consider defining a PREFERRED_PROVIDER entry to match
> gnash-browser-plugin
> NOTE: multiple providers are available for runtime xserver-kdrive
> (xserver-kdrive, xserver-kdrive-1300)
> NOTE: consider defining a PREFERRED_PROVIDER entry to match xserver-kdrive
> NOTE: multiple providers are available for runtime abiword (abiword,
> abiword-embedded)
> NOTE: consider defining a PREFERRED_PROVIDER entry to match abiword
> NOTE: multiple providers are available for runtime pstree (pstree, psmisc)
> NOTE: consider defining a PREFERRED_PROVIDER entry to match pstree
> NOTE: Preparing runqueue
> NOTE: Executing RunQueue Tasks
> NOTE: Running task 3417 of 9585 (ID: 8222,
> virtual:native:/home/lucas/Work/oe/openembedded/recipes/gobject-introspection/
> gobject-introspection_0.9.10.bb, do_compile)
> NOTE: package gobject-introspection-native-0.9.10-r1: task do_compile:
> Started
> ERROR: Logfile of failure stored in:
> /home/lucas/Work/oe/tmp/work/x86_64-linux/gobject-introspection-native-0.9.10-r1/temp/log.do_compile.2677
> Log data follows:
> | + do_compile
> | + base_do_compile
> | + '[' -e Makefile -o -e makefile -o -e GNUmakefile ']'
> | + oe_runmake
> | + oenote make
> | + echo NOTE: make
> | NOTE: make
> | + make
> | make all-recursive
> | make[1]: Entering directory
> `/home/lucas/Work/oe/tmp/work/x86_64-linux/gobject-introspection-native-0.9.10-r1/gobject-introspection-0.9.10'
> | Making all in girepository
> | make[2]: Entering directory
> `/home/lucas/Work/oe/tmp/work/x86_64-linux/gobject-introspection-native-0.9.10-r1/gobject-introspection-0.9.10/girepository'
> | make[2]: Nothing to be done for `all'.
> | make[2]: Leaving directory
> `/home/lucas/Work/oe/tmp/work/x86_64-linux/gobject-introspection-native-0.9.10-r1/gobject-introspection-0.9.10/girepository'
> | Making all in giscanner
> | make[2]: Entering directory
> `/home/lucas/Work/oe/tmp/work/x86_64-linux/gobject-introspection-native-0.9.10-r1/gobject-introspection-0.9.10/giscanner'
> | make all-am
> | make[3]: Entering directory
> `/home/lucas/Work/oe/tmp/work/x86_64-linux/gobject-introspection-native-0.9.10-r1/gobject-introspection-0.9.10/giscanner'
> | make[3]: Nothing to be done for `all-am'.
> | make[3]: Leaving directory
> `/home/lucas/Work/oe/tmp/work/x86_64-linux/gobject-introspection-native-0.9.10-r1/gobject-introspection-0.9.10/giscanner'
> | make[2]: Leaving directory
> `/home/lucas/Work/oe/tmp/work/x86_64-linux/gobject-introspection-native-0.9.10-r1/gobject-introspection-0.9.10/giscanner'
> | Making all in tools
> | make[2]: Entering directory
> `/home/lucas/Work/oe/tmp/work/x86_64-linux/gobject-introspection-native-0.9.10-r1/gobject-introspection-0.9.10/tools'
> | make[2]: Nothing to be done for `all'.
> | make[2]: Leaving directory
> `/home/lucas/Work/oe/tmp/work/x86_64-linux/gobject-introspection-native-0.9.10-r1/gobject-introspection-0.9.10/tools'
> | Making all in gir
> | make[2]: Entering directory
> `/home/lucas/Work/oe/tmp/work/x86_64-linux/gobject-introspection-native-0.9.10-r1/gobject-introspection-0.9.10/gir'
> | GICOMP cairo-1.0.gir
> |
> /home/lucas/Work/oe/tmp/work/x86_64-linux/gobject-introspection-native-0.9.10-r1/gobject-introspection-0.9.10/tools/.libs/lt-g-ir-compiler:
> symbol lookup error: /usr/lib/libgirepository-1.0.so.1: undefined symbol:
> g_mutex_lock
> | make[2]: *** [cairo-1.0.typelib] Error 127
> | make[2]: Leaving directory
> `/home/lucas/Work/oe/tmp/work/x86_64-linux/gobject-introspection-native-0.9.10-r1/gobject-introspection-0.9.10/gir'
> | make[1]: *** [all-recursive] Error 1
> | make[1]: Leaving directory
> `/home/lucas/Work/oe/tmp/work/x86_64-linux/gobject-introspection-native-0.9.10-r1/gobject-introspection-0.9.10'
> | make: *** [all] Error 2
> | + die 'oe_runmake failed'
> | + oefatal 'oe_runmake failed'
> NOTE: package gobject-introspection-native-0.9.10-r1: task do_compile:
> Failed
> ERROR: Function 'do_compile' failed (see
> /home/lucas/Work/oe/tmp/work/x86_64-linux/gobject-introspection-native-0.9.10-r1/temp/log.do_compile.2677
> for further information)
> ERROR: Task 8222
> (virtual:native:/home/lucas/Work/oe/openembedded/recipes/gobject-introspection/
> gobject-introspection_0.9.10.bb, do_compile) failed with exit code '1'
> ERROR:
> 'virtual:native:/home/lucas/Work/oe/openembedded/recipes/gobject-introspection/
> gobject-introspection_0.9.10.bb' failed
> lucas@ubuntu:~/Work/oe$
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
Where did your build scripts come from? If they didn't come from [1]
then I would suggest re-trying with the instructions on that page.
[1] http://www.angstrom-distribution.org/building-angstrom
Cheers,
--
Jack Mitchell (jack@embed.me.uk)
Embedded Systems Engineer
http://www.embed.me.uk
--
prev parent reply other threads:[~2012-09-17 13:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-17 13:13 package gobject-introspection-native-0.9.10-r1: task do_compile: Failed Lucas
2012-09-17 13:31 ` Burton, Ross
2012-09-17 13:41 ` Martin Jansa
2012-09-17 13:48 ` Jack Mitchell [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50572A31.90206@communistcode.co.uk \
--to=ml@communistcode.co.uk \
--cc=openembedded-devel@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.