From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <50588458.1010802@xenomai.org> Date: Tue, 18 Sep 2012 16:25:28 +0200 From: Gilles Chanteperdrix MIME-Version: 1.0 References: <50588110.6030701@siemens.com> In-Reply-To: <50588110.6030701@siemens.com> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai] [GIT PULL] core-5 for x86 List-Id: Discussions about the Xenomai project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Wolfgang Mauerer Cc: "Kiszka, Jan" , "xenomai@xenomai.org" On 09/18/2012 04:11 PM, Wolfgang Mauerer wrote: > Dear all, > > here's a rebase of the x86-specific bits of core-4 to core-5. I've > included all x86 specific changes that are not yet in core-5, and > also added the patches I sent earlier for core-4. I did not include a > separate patch for the mechanical changes required to apply the > x86 base patch on top of core-5, but can surely do so if desired. I am not quite finished with x86 on 3.4. So, I would like to start 3.5 from the finishing point on 3.4. There are already commits in my branch which you did not take: http://git.xenomai.org/?p=ipipe-gch.git;a=shortlog;h=refs/heads/for-core-3.4 This is assuming that I am the (flaky subsitute for a) maintainer of the x86 architecture. Of course, if someone wants to take over the maintenance of the x86 architecture, I am gladly returning to the ARMs. 4-x86 applied to core-5 > x86/ipipe: Make io_apic_level_ack_pending available for ipipe What is this commit? Neither the text nor the diff are very explicit. -- Gilles.