All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Fwd: Re:  [PATCH] mx6: Remove lowlevel_init.S
Date: Thu, 20 Sep 2012 21:02:38 +0530	[thread overview]
Message-ID: <505B3716.6040502@gmail.com> (raw)
In-Reply-To: <5057660E.4090707@gmail.com>

Hi Fabio,

On 17-09-2012 22:04, Fabio Estevam wrote:
> lowlevel_init.S is not used on mx6, so remove the file and the associated calls.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>   arch/arm/cpu/armv7/mx6/Makefile        |    1 -
>   arch/arm/cpu/armv7/mx6/lowlevel_init.S |   25 -------------------------
>   arch/arm/cpu/armv7/start.S             |   24 ------------------------
>   3 files changed, 50 deletions(-)
>   delete mode 100644 arch/arm/cpu/armv7/mx6/lowlevel_init.S
>
> diff --git a/arch/arm/cpu/armv7/mx6/Makefile b/arch/arm/cpu/armv7/mx6/Makefile
> index cbce411..4f9ca68 100644
> --- a/arch/arm/cpu/armv7/mx6/Makefile
> +++ b/arch/arm/cpu/armv7/mx6/Makefile
> @@ -28,7 +28,6 @@ include $(TOPDIR)/config.mk
>   LIB	= $(obj)lib$(SOC).o
>
>   COBJS	= soc.o clock.o
> -SOBJS   = lowlevel_init.o
>
>   SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
>   OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
SOBJS may be removed from above ones.
> diff --git a/arch/arm/cpu/armv7/mx6/lowlevel_init.S b/arch/arm/cpu/armv7/mx6/lowlevel_init.S
> deleted file mode 100644
> index acadef2..0000000
> --- a/arch/arm/cpu/armv7/mx6/lowlevel_init.S
> +++ /dev/null
> @@ -1,25 +0,0 @@
> -/*
> - * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -.section ".text.init", "x"
> -
> -#include <linux/linkage.h>
> -
> -ENTRY(lowlevel_init)
> -	mov pc, lr
> -ENDPROC(lowlevel_init)
> diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
> index 32658eb..4c7c385 100644
> --- a/arch/arm/cpu/armv7/start.S
> +++ b/arch/arm/cpu/armv7/start.S
> @@ -152,7 +152,6 @@ reset:
>   	/* the mask ROM code should have PLL and others stable */
>   #ifndef CONFIG_SKIP_LOWLEVEL_INIT
>   	bl	cpu_init_cp15
> -	bl	cpu_init_crit
>   #endif
>
>   /* Set stackpointer in internal RAM to call board_init_f */
> @@ -353,29 +352,6 @@ ENTRY(cpu_init_cp15)
>   	mov	pc, lr			@ back to my caller
>   ENDPROC(cpu_init_cp15)
>
> -#ifndef CONFIG_SKIP_LOWLEVEL_INIT
> -/*************************************************************************
> - *
> - * CPU_init_critical registers
> - *
> - * setup important registers
> - * setup memory timing
> - *
> - *************************************************************************/
> -ENTRY(cpu_init_crit)
> -	/*
> -	 * Jump to board specific initialization...
> -	 * The Mask ROM will have already initialized
> -	 * basic memory. Go here to bump up clock rate and handle
> -	 * wake up conditions.
> -	 */
> -	mov	ip, lr			@ persevere link reg across call
> -	bl	lowlevel_init		@ go setup pll,mux,memory
> -	mov	lr, ip			@ restore link
> -	mov	pc, lr			@ back to my caller
> -ENDPROC(cpu_init_crit)
> -#endif
> -
>   #ifndef CONFIG_SPL_BUILD
>   /*
>    *************************************************************************
>

Regards,
Ashok

           reply	other threads:[~2012-09-20 15:32 UTC|newest]

Thread overview: expand[flat|nested]  mbox.gz  Atom feed
 [parent not found: <5057660E.4090707@gmail.com>]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=505B3716.6040502@gmail.com \
    --to=ashokkourla2000@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.