Hi guys,
Can anyone tell me if pandaboard is working with master branch of poky? 
I just don't want to waste my time figuring out what I've done wrong, if 
the build is not working anyway.

Thanks,
Radu

On 09/25/2012 04:43 PM, Radu Moisan wrote:
> Hi guys,
> I tried to start pandaboard with latest from master but it got stuck 
> booting the kernel.
> This is all I got, do you have any idea what am I missing?
>
>
> U-Boot SPL 2011.12-dirty (Sep 24 2012 - 17:18:42)
> Texas Instruments OMAP4430 ES2.3
> Bypassing DPLL failed 4a008180
> OMAP SD/MMC: 0
> reading u-boot.img
> reading u-boot.img
>
>
> U-Boot 2011.12-dirty (Sep 24 2012 - 17:18:42)
>
> CPU  : OMAP4430 ES2.3
> Board: OMAP4 Panda
> I2C:   ready
> DRAM:  1 GiB
> MMC:   OMAP SD/MMC: 0
> Using default environment
>
> In:    serial
> Out:   serial
> Err:   serial
> Hit any key to stop autoboot:  0
> reading boot.scr
>
> ** Unable to read "boot.scr" from mmc 0:1 **
> reading uImage
>
> 4176612 bytes read
> Booting from mmc0 ...
> ## Booting kernel from Legacy Image at 82000000 ...
>    Image Name:   Linux-3.1.0
>    Image Type:   ARM Linux Kernel Image (uncompressed)
>    Data Size:    4176548 Bytes = 4 MiB
>    Load Address: 80008000
>    Entry Point:  80008000
>    Verifying Checksum ... OK
>    Loading Kernel Image ... OK
> OK
>
> Starting kernel ...
>
> Uncompressing Linux... done, booting the kernel.
>
>
> Thanks,
> Radu
>
>
> _______________________________________________
> meta-ti mailing list
> meta-ti@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti