All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ben Gray <ben.r.gray@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: ath6kl-devel@qualcomm.com
Subject: ath6kl ar6004/ar9374 (hw 1.3) WPA/WPA2 supported ?
Date: Wed, 26 Sep 2012 12:02:35 +0100	[thread overview]
Message-ID: <5062E0CB.6040308@gmail.com> (raw)

Hi,

     I have a bunch of UB134 USB dongles which have a ath6kl chip with 
H/W version 0x31c8088a, I'm trying to get them to work with the ath6kl 
driver from the compat-wireless-3.6-rc5-1 package. I've applied this 
(https://patchwork.kernel.org/patch/1203191/) patch to the source and 
pulled the hw1.3 firmware from the linux-firmware git.

     The driver works as far as it can scan AP's and connect to 
unencrypted networks, however WPA/WPA2 doesn't work when I run 
wpa_supplicant. I realise "WPA doesn't work" is a bit vague, and I can 
post the wpa_supplicant and driver logs if that helps, but I've seen 
another post which says they couldn't get WPA to work either, so I'd 
like to know if this is a known issue with the driver and/or firmware? 
Has anyone had any luck getting WPA/WPA2 working with ath6kl hw1.3 ?

     If this is a known issue does anyone know when it might be fixed ?


Thanks in advance,
Ben.


             reply	other threads:[~2012-09-26 11:02 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-26 11:02 Ben Gray [this message]
2012-09-26 11:44 ` ath6kl ar6004/ar9374 (hw 1.3) WPA/WPA2 supported ? Mohammed Shafi
2012-09-26 11:49 ` Jonathan Bagg
2012-09-26 11:57   ` Jouni Malinen
2012-09-26 12:19   ` Mohammed Shafi
2012-09-26 12:35     ` Ben Gray
2012-09-26 14:02       ` Mohammed Shafi
2012-09-26 15:11         ` Ben Gray
2012-09-26 15:14           ` Mohammed Shafi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5062E0CB.6040308@gmail.com \
    --to=ben.r.gray@gmail.com \
    --cc=ath6kl-devel@qualcomm.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.