All of lore.kernel.org
 help / color / mirror / Atom feed
From: Martin Peevski <martin@ronetix.at>
To: buildroot@busybox.net
Subject: [Buildroot] Fwd: Re:  Basic questions about using BuildRoot
Date: Sat, 29 Sep 2012 17:09:44 +0300	[thread overview]
Message-ID: <50670128.7090203@ronetix.at> (raw)
In-Reply-To: <5066FE59.9060600@relinux.de>

On 29/09/12 16:57, Stephan Hoffmann wrote:
> Am 29.09.2012 15:17, schrieb Martin Peevski:
>> On 28/09/12 17:02, Martin Peevski wrote:
>>> Also want to ask because I was impossible to configure the Buildroot
>>> using Kernel sources from my computer. Is it possible and how? If
>>> it's impossible I can deliver the sources via internet but they are
>>> not in Git repository, is that problem?
> Hi Martin,
>
> you can use a local linux source tree with the source directory override
> mechanism described here: http://free-electrons.com/blog/buildroot-2011-11/
>>> Thanks in advance!
>>> Martin
>>> _______________________________________________
>>> buildroot mailing list
>>> buildroot at busybox.net
>>> http://lists.busybox.net/mailman/listinfo/buildroot
>>
>>
>> Hi again! Before response to my previous letter I want to tell you
>> that build together the kernel and the rootfs and my ethernet is still
>> not working. Can you help me resolve the problem, please? Is the
>> ethernet dependent on my Buildroot configuration or may be something
>> another?
> Do you have any further diagnostics like kernel messages or such? Do you
> have a working kernel for your board? If yes, did you double-check
> kernel configuration against the known good one? If no, are you sure
> your hardware is working correctly? Can you set an IP address without
> error messages?
>
> Regards
>
> Stephan
>> Thanks, Martin.
>> _______________________________________________
>> buildroot mailing list
>> buildroot at busybox.net
>> http://lists.busybox.net/mailman/listinfo/buildroot
>
I'm not build the Kernel with diagnostic information but I have working 
Kernel and may be rootfs because I have command prompt with buildroot. 
Can execute ifconfig command but the response don't show my IP, shows 
only this:
# ifconfig
lo        Link encap:Local Loopback
           inet addr:127.0.0.1  Mask:255.0.0.0
           UP LOOPBACK RUNNING  MTU:16436  Metric:1
           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:0
           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

I think I'm sure that the Kernel is working because with another rootfs 
my Ethernet is working - can read the IP with ifconfig. But I must use 
the rootfs from Buildroot because the small size of it.

  reply	other threads:[~2012-09-29 14:09 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-15 17:29 [Buildroot] Basic questions about using BuildRoot Martin Peevski
2012-09-15 17:50 ` Thomas De Schampheleire
     [not found]   ` <5054C649.6000006@ronetix.at>
2012-09-15 18:26     ` Thomas De Schampheleire
     [not found]       ` <5055A940.7070802@ronetix.at>
2012-09-16 11:12         ` [Buildroot] Fwd: " Thomas De Schampheleire
     [not found]           ` <5055C935.3050108@ronetix.at>
2012-09-17 10:43             ` Thomas De Schampheleire
2012-09-18 22:06               ` Arnout Vandecappelle
2012-09-20  6:19                 ` Martin Peevski
2012-09-27  8:55                   ` Martin Peevski
2012-09-27  9:53                     ` Thomas Petazzoni
2012-09-27 10:42                       ` Arnout Vandecappelle
2012-09-27 11:57                       ` Martin Peevski
2012-09-27 12:21                         ` Thomas Petazzoni
2012-09-28 14:02                           ` Martin Peevski
2012-09-29 13:17                             ` Martin Peevski
2012-09-29 13:57                               ` Stephan Hoffmann
2012-09-29 14:09                                 ` Martin Peevski [this message]
2012-09-29 14:14                                   ` Stephan Hoffmann
2012-10-01  8:14                                     ` Martin Peevski
2012-10-01  8:29                                       ` Stephan Hoffmann
2012-10-01  8:40                                       ` Samuel Martin
2012-10-01  9:06                                         ` Martin Peevski
2012-10-01  9:11                                           ` Samuel Martin
2012-10-01  9:17                                             ` Martin Peevski
2012-10-01 12:51                                               ` Martin Peevski
2012-10-03 15:05                                               ` Martin Peevski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50670128.7090203@ronetix.at \
    --to=martin@ronetix.at \
    --cc=buildroot@busybox.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.