From: Wolfgang Grandegger <wg@grandegger.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] mpc52xx/motionpro: fix monitor size and update default environment
Date: Sat, 29 Sep 2012 21:27:00 +0200 [thread overview]
Message-ID: <50674B84.9080702@grandegger.com> (raw)
Since a while, the size of the u-boot.bin image is larger than
256kB. This requires moving the environment sectors by one. As
we are at it, we also update a few other custom settings.
Signed-off-by: Wolfgang Grandegger <wg@denx.de>
---
include/configs/motionpro.h | 44 +++++++++++++++++++++++++-----------------
1 files changed, 26 insertions(+), 18 deletions(-)
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index f6a4497..1e19ffa 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -2,7 +2,7 @@
* (C) Copyright 2003-2007
* Wolfgang Denk, DENX Software Engineering, wd at denx.de.
*
- * Based on PRO Motion board config file by Andy Joseph, andy at promessdev.com
+ * Based on Motion-PRO board config file by Robert McCullough, rob at promessinc.com
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -100,6 +100,7 @@
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_ETHADDR 00:50:C2:40:10:00
#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
@@ -111,21 +112,21 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"hostname=motionpro\0" \
- "netmask=255.255.0.0\0" \
- "ipaddr=192.168.160.22\0" \
- "serverip=192.168.1.1\0" \
- "gatewayip=192.168.1.1\0" \
+ "netmask=255.255.255.0\0" \
+ "ipaddr=192.168.1.106\0" \
+ "serverip=192.168.1.100\0" \
+ "gatewayip=192.168.1.100\0" \
"console=ttyPSC0,115200\0" \
"u-boot_addr=400000\0" \
"kernel_addr=400000\0" \
"fdt_addr=700000\0" \
"ramdisk_addr=800000\0" \
"multi_image_addr=800000\0" \
- "rootpath=/opt/eldk/ppc_6xx\0" \
- "u-boot=motionpro/u-boot.bin\0" \
- "bootfile=motionpro/uImage\0" \
- "fdt_file=motionpro/motionpro.dtb\0" \
- "ramdisk_file=motionpro/uRamdisk\0" \
+ "rootpath=/opt/eldk-4.2/ppc_6xx\0" \
+ "u-boot=/tftpboot/motionpro/u-boot.bin\0" \
+ "bootfile=/tftpboot/motionpro/uImage\0" \
+ "fdt_file=/tftpboot/motionpro/motionpro.dtb\0" \
+ "ramdisk_file=/tftpboot/motionpro/uRamdisk\0" \
"multi_image_file=kernel+initrd+dtb.img\0" \
"load=tftp ${u-boot_addr} ${u-boot}\0" \
"update=prot off fff00000 +${filesize};" \
@@ -135,25 +136,32 @@
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
- "fat_args=setenv bootargs rw\0" \
- "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
+ "fat_args=setenv bootargs root=/dev/sda rw\0" \
+ "mtdids=nor0=ff000000.flash\0" \
+ "mtdparts=ff000000.flash:13m(fs),2m(kernel),384k(uboot)," \
+ "128k(env),128k(redund_env)," \
+ "128k(dtb),128k(user_data)\0" \
+ "addcons=setenv bootargs ${bootargs} console=${console}\0" \
+ "addmtd=setenv bootargs ${bootargs} mtdparts=${mtdparts}\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
"${netmask}:${hostname}:${netdev}:off panic=1 " \
"console=${console}\0" \
"net_nfs=tftp ${kernel_addr} ${bootfile}; " \
- "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip; " \
+ "tftp ${fdt_addr} ${fdt_file}; " \
+ "run nfsargs addip addmtd; " \
"bootm ${kernel_addr} - ${fdt_addr}\0" \
"net_self=tftp ${kernel_addr} ${bootfile}; " \
"tftp ${fdt_addr} ${fdt_file}; " \
"tftp ${ramdisk_addr} ${ramdisk_file}; " \
- "run ramargs addip; " \
+ "nfs ${ramdisk_addr} ${serverip}:${rootpath}/images/uRamdisk; " \
+ "run ramargs addip addcons addmtd; " \
"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
- "fat_multi=run fat_args addip; fatload ide 0:1 " \
+ "fat_multi=run fat_args addip addmtd; fatload ide 0:1 " \
"${multi_image_addr} ${multi_image_file}; " \
"bootm ${multi_image_addr}\0" \
""
-#define CONFIG_BOOTCOMMAND "run net_nfs"
+#define CONFIG_BOOTCOMMAND "run fat_multi"
/*
* do board-specific init
@@ -209,7 +217,7 @@
#define CONFIG_SYS_RAMBOOT 1
#endif
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* 384 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (1024 << 10) /* 1 MiB for malloc() */
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */
@@ -274,7 +282,7 @@
#define CONFIG_FLASH_CFI_MTD
#define MTDIDS_DEFAULT "nor0=motionpro-0"
#define MTDPARTS_DEFAULT "mtdparts=motionpro-0:" \
- "13m(fs),2m(kernel),256k(uboot)," \
+ "13m(fs),2m(kernel),384k(uboot)," \
"128k(env),128k(redund_env)," \
"128k(dtb),-(user_data)"
--
1.7.7.6
next reply other threads:[~2012-09-29 19:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-29 19:27 Wolfgang Grandegger [this message]
2012-10-02 22:06 ` [U-Boot] mpc52xx/motionpro: fix monitor size and update default environment Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50674B84.9080702@grandegger.com \
--to=wg@grandegger.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.