From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0000604]: sound loop problem
Date: Thu, 28 Oct 2004 02:22:26 +0200 [thread overview]
Message-ID: <50696d5d196b45ca7d1893f3f6497bde@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=604>
======================================================================
Reported By: chomwitt
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Issue ID: 604
Category: PCI - atiixp
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
Distribution: slackware10
Kernel Version: 2.6.7
======================================================================
Date Submitted: 10-26-2004 01:29 CEST
Last Modified: 10-28-2004 02:22 CEST
======================================================================
Summary: sound loop problem
Description:
i get a sound loop which gets correctet only
while moving the mouse!
======================================================================
----------------------------------------------------------------------
chomwitt - 10-28-04 02:17
----------------------------------------------------------------------
aadebug output
ALSA Audio Debug v0.0.8 - Thu Oct 28 01:02:33 EEST 2004
http://alsa.opensrc.org/
aadebug Kernel ----------------------------------------------------
Linux garibaldh20 2.6.7
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=13 Thu Oct 28 00:25:29
EEST 2004 i686 unknown
unknown GNU/Linux
Loaded Modules --------------------------------------------
snd_pcm_oss 51368 0
snd_mixer_oss 19328 1 snd_pcm_oss
snd_atiixp 18472 0
snd_ac97_codec 67920 1 snd_atiixp
snd_pcm 80904 2 snd_pcm_oss,snd_atiixp
snd_timer 22788 1 snd_pcm
snd 46820 6
snd_pcm_oss,snd_mixer_oss,snd_atiixp,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc 9480 2 snd_atiixp,snd_pcm
Proc Config -----------------------------------------------
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_PCM_OSS=m
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_AD1816A=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
Modprobe Conf --------------------------------------------
alias snd-card-0 snd-atiixp
alias sound-slot-0 snd-atiixp
Proc Asound -----------------------------------------------
Advanced Linux Sound Architecture Driver Version 1.0.6a
Compiled on Oct 28 2004 for kernel 2.6.7.
0 [IXP ]: ATIIXP - ATI IXP
ATI IXP rev 0 at 0xe8003000, irq 10
0: [0- 0]: ctl
16: [0- 0]: digital audio playback
24: [0- 0]: digital audio capture
33: : timer
00-00: ATI IXP AC97 : ATI IXP AC97 : playback 1 : capture 1
Dev Snd ---------------------------------------------------
Warning: /dev/snd does not exist
CPU -------------------------------------------------------
model name : Intel(R) Celeron(R) CPU 2.80GHz
cpu MHz : 2801.084
RAM -------------------------------------------------------
MemTotal: 191744 kB
SwapTotal: 240932 kB
Hardware --------------------------------------------------
00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5833 (rev 02)
00:14.5 Multimedia audio controller: ATI Technologies Inc SoundMAX
Integrated Digital Audio
----------------------------------------------------------------------
chomwitt - 10-28-04 02:22
----------------------------------------------------------------------
some more information:
this is the /proc/interrupt
0: 5757032 XT-PIC timer
1: 2574 XT-PIC i8042
2: 0 XT-PIC cascade
5: 100000 XT-PIC ohci_hcd
9: 4 XT-PIC acpi
10: 9584 XT-PIC ohci_hcd, yenta, yenta, ATI IXP
11: 2 XT-PIC ehci_hcd, ohci_hcd, ohci_hcd
12: 601 XT-PIC i8042
14: 16262 XT-PIC ide0
15: 21 XT-PIC ide1
NMI: 0
LOC: 5757240
ERR: 0
lspci | grep -i audio
00:14.5 Multimedia audio controller: ATI Technologies Inc SoundMAX
Integrated Digital Audio
(someone suggested to me to remove apic,acpi,hpet from kernel.
i did that , recompiled , but the problem remained )
Issue History
Date Modified Username Field Change
======================================================================
10-26-04 01:29 chomwitt New Issue
10-26-04 01:29 chomwitt Distribution => slackware10
10-26-04 01:29 chomwitt Kernel Version => 2.6.7
10-27-04 21:07 chomwitt Note Added: 0002280
10-28-04 02:14 chomwitt Note Added: 0002281
10-28-04 02:17 chomwitt Note Added: 0002282
10-28-04 02:22 chomwitt Note Added: 0002283
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE
LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click
next reply other threads:[~2004-10-28 0:22 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-10-28 0:22 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-03-22 2:19 [ALSA - driver 0000604]: sound loop problem bugtrack
2005-09-14 14:01 bugtrack
2004-11-23 21:36 bugtrack
2004-11-10 11:56 bugtrack
2004-10-28 0:17 bugtrack
2004-10-28 0:14 bugtrack
2004-10-27 19:07 bugtrack
2004-10-25 23:29 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50696d5d196b45ca7d1893f3f6497bde@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.