From: Mahesh Palivela <maheshp@posedge.com>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Subject: [PATCH v4 2/2] mac80211: VHT peer STA caps
Date: Wed, 3 Oct 2012 10:00:42 +0530 [thread overview]
Message-ID: <506BBF72.5070009@posedge.com> (raw)
From: Mahesh Palivela <maheshp@posedge.com>
To save AP's VHT capabilities in mac80211 under STA mode
Signed-off-by: Mahesh Palivela <maheshp@posedge.com>
---
include/net/mac80211.h | 3 +++
net/mac80211/Makefile | 1 +
net/mac80211/ieee80211_i.h | 7 +++++++
net/mac80211/mlme.c | 5 +++++
net/mac80211/util.c | 12 ++++++++++++
net/mac80211/vht.c | 36 ++++++++++++++++++++++++++++++++++++
6 files changed, 64 insertions(+), 0 deletions(-)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index f12df5b..89d5bba 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1122,6 +1122,8 @@ enum ieee80211_sta_state {
* @aid: AID we assigned to the station if we're an AP
* @supp_rates: Bitmap of supported rates (per band)
* @ht_cap: HT capabilities of this STA; restricted to our own TX
capabilities
+ * @vht_cap: VHT capabilities of this STA; Not restricting any capabilities
+ * of remote STA. Taking as is.
* @wme: indicates whether the STA supports WME. Only valid during
AP-mode.
* @drv_priv: data area for driver use, will always be aligned to
* sizeof(void *), size is determined in hw information.
@@ -1134,6 +1136,7 @@ struct ieee80211_sta {
u8 addr[ETH_ALEN];
u16 aid;
struct ieee80211_sta_ht_cap ht_cap;
+ struct ieee80211_sta_vht_cap vht_cap;
bool wme;
u8 uapsd_queues;
u8 max_sp;
diff --git a/net/mac80211/Makefile b/net/mac80211/Makefile
index a7dd110..4911202 100644
--- a/net/mac80211/Makefile
+++ b/net/mac80211/Makefile
@@ -8,6 +8,7 @@ mac80211-y := \
wpa.o \
scan.o offchannel.o \
ht.o agg-tx.o agg-rx.o \
+ vht.o \
ibss.o \
iface.o \
rate.o \
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 1fd7dfc..546da35 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1188,6 +1188,8 @@ struct ieee802_11_elems {
u8 *wmm_param;
struct ieee80211_ht_cap *ht_cap_elem;
struct ieee80211_ht_operation *ht_operation;
+ struct ieee80211_vht_cap *vht_cap_elem;
+ struct ieee80211_vht_operation *vht_operation;
struct ieee80211_meshconf_ie *mesh_config;
u8 *mesh_id;
u8 *peering;
@@ -1416,6 +1418,11 @@ void ieee80211_release_reorder_timeout(struct
sta_info *sta, int tid);
u8 ieee80211_mcs_to_chains(const struct ieee80211_mcs_info *mcs);
+/* VHT */
+void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data
*sdata,
+ struct ieee80211_supported_band *sband,
+ struct ieee80211_vht_cap *vht_cap_ie,
+ struct ieee80211_sta_vht_cap *vht_cap);
/* Spectrum management */
void ieee80211_process_measurement_req(struct ieee80211_sub_if_data
*sdata,
struct ieee80211_mgmt *mgmt,
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 8cefc18..02f4ed5 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -2156,6 +2156,11 @@ static bool ieee80211_assoc_success(struct
ieee80211_sub_if_data *sdata,
sta->supports_40mhz =
sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+ if (elems.vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
+ ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband,
+ elems.vht_cap_elem,
+ &sta->sta.vht_cap);
+
rate_control_rate_init(sta);
if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED)
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 3b35356..af6c54d 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -741,6 +741,18 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len,
else
elem_parse_failed = true;
break;
+ case WLAN_EID_VHT_CAPABILITY:
+ if (elen >= sizeof(struct ieee80211_vht_cap))
+ elems->vht_cap_elem = (void *)pos;
+ else
+ elem_parse_failed = true;
+ break;
+ case WLAN_EID_VHT_OPERATION:
+ if (elen >= sizeof(struct ieee80211_vht_operation))
+ elems->vht_operation = (void *)pos;
+ else
+ elem_parse_failed = true;
+ break;
case WLAN_EID_MESH_ID:
elems->mesh_id = pos;
elems->mesh_id_len = elen;
diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c
new file mode 100644
index 0000000..18f584e
--- /dev/null
+++ b/net/mac80211/vht.c
@@ -0,0 +1,36 @@
+/*
+ * VHT handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/ieee80211.h>
+#include <linux/export.h>
+#include <net/mac80211.h>
+#include "ieee80211_i.h"
+
+
+void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data
*sdata,
+ struct ieee80211_supported_band *sband,
+ struct ieee80211_vht_cap *vht_cap_ie,
+ struct ieee80211_sta_vht_cap *vht_cap)
+{
+ if (WARN_ON_ONCE(!vht_cap))
+ return;
+
+ memset(vht_cap, 0, sizeof(*vht_cap));
+
+ if (!vht_cap_ie || !sband->vht_cap.vht_supported)
+ return;
+
+ vht_cap->vht_supported = true;
+
+ vht_cap->cap = le16_to_cpu(vht_cap_ie->vht_cap_info);
+
+ /* Copy peer MCS info, the driver might need them. */
+ memcpy((u8 *)&vht_cap->vht_mcs,
+ (u8 *)&vht_cap_ie->supp_mcs,
+ sizeof(struct ieee80211_vht_mcs_info));
+}
next reply other threads:[~2012-10-03 4:30 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-03 4:30 Mahesh Palivela [this message]
2012-10-10 8:37 ` [PATCH v4 2/2] mac80211: VHT peer STA caps Johannes Berg
-- strict thread matches above, loose matches on Subject: below --
2012-10-10 8:49 Mahesh Palivela
2012-10-10 8:59 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=506BBF72.5070009@posedge.com \
--to=maheshp@posedge.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.