[U-Boot] [PATCH 5/7] Tegra30: Cardhu: Add DT files

[Stephen Warren <swarren@wwwdotorg.org>]

On 10/02/2012 04:45 PM, Tom Warren wrote:
> These are stripped down for bringup, They'll be filled out later
> to match-up with the kernel DT contents, and/or as devices are
> brought up (mmc, usb, spi, etc.).

> diff --git a/arch/arm/dts/tegra30.dtsi b/arch/arm/dts/tegra30.dtsi

> +/include/ "skeleton.dtsi"
> +
> +/ {
> +	model = "NVIDIA Tegra30";
> +	compatible = "nvidia,tegra30";
> +
> +	clocks {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		osc: clock {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +		};
> +	};

Nothing uses any of the clock stuff; I don't think we should add this
until it's needed.

> +	gpio: gpio at 6000d000 {
> +		compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio";
> +		reg = <0x6000d000 0x1000>;
> +		#gpio-cells = <2>;
> +		gpio-controller;
> +	};

Similarly, nothing uses this.

> +	serial at 70006000 {
> +		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
> +		reg = <0x70006000 0x40>;
> +		reg-shift = <2>;

This needs the following extra line here:

                interrupts = <0 36 0x04>;

> +		status = "disabled";
> +	};

Although again, nothing uses this, so may as well omit it.

> diff --git a/board/nvidia/dts/tegra30-cardhu.dts b/board/nvidia/dts/tegra30-cardhu.dts
> new file mode 100644
> index 0000000..68563e8
> --- /dev/null
> +++ b/board/nvidia/dts/tegra30-cardhu.dts
> @@ -0,0 +1,35 @@
> +/dts-v1/;
> +
> +/memreserve/ 0x1c000000 0x04000000;
> +/include/ ARCH_CPU_DTS
> +
> +/ {
> +	model = "NVIDIA Cardhu";
> +	compatible = "nvidia,cardhu", "nvidia,tegra30";
> +
> +	aliases {
> +	};

May as well leave that out until it's needed.

> +        memory {
> +                device_type = "memory";
> +                reg = <0x80000000 0xc0000000>;
> +        };

There's an indentation error there.

> +
> +	clocks {
> +		clk_32k: clk_32k {
> +			clock_frequency = <32000>;
> +		};
> +		osc {
> +			clock-frequency = <12000000>;
> +		};
> +	};
> +
> +	clock at 60006000 {
> +		clocks = <&clk_32k &osc>;
> +	};
> +
> +	serial at 70006000 {
> +		status = "ok";
> +		clock-frequency = < 216000000 >;
> +	};
> +};

Similarly, I don't think anything uses any of that.