All of lore.kernel.org
 help / color / mirror / Atom feed
From: Arnout Vandecappelle <arnout@mind.be>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v2] sylpheed: Fix includedir
Date: Sun, 07 Oct 2012 13:09:57 +0200	[thread overview]
Message-ID: <50716305.9040802@mind.be> (raw)
In-Reply-To: <1349549706-24827-1-git-send-email-gvaxon@gmail.com>

On 06/10/12 20:55, Valentine Barshak wrote:
> The sylpheed headers are installed to the target directory,
> creating full staging directory path in the target rootfs,
> which is wrong.
> This happens because the headers are installed to
> $(DESTDIR)$(includedir), while DESTDIR is $(TARGET_DIR)
> and includedir is set to $(STAGING_DIR)/usr/include in the
> SYLPHEED_CONF_OPT.
>
> The includedir was set to staging include because sylpheed
> incorrectly adds includedir to its include path, and does
> not build with the default includedir set to /usr/include
> in the target filesystem.
>
> This removes includedir setting and also removes it from
> include paths in Makefiles. The same approach is used
> in the OE.
>
> Signed-off-by: Valentine Barshak<gvaxon@gmail.com>

Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

  with a small addition:

> ---
>   package/sylpheed/sylpheed.mk | 11 +++++++++--
>   1 file changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/package/sylpheed/sylpheed.mk b/package/sylpheed/sylpheed.mk
> index 451c4de..100fd67 100644
> --- a/package/sylpheed/sylpheed.mk
> +++ b/package/sylpheed/sylpheed.mk
> @@ -9,11 +9,18 @@ SYLPHEED_VERSION = $(SYLPHEED_VERSION_MAJOR).$(SYLPHEED_VERSION_MINOR)
>   SYLPHEED_SOURCE = sylpheed-$(SYLPHEED_VERSION).tar.bz2
>   SYLPHEED_SITE = http://sylpheed.sraoss.jp/sylpheed/v$(SYLPHEED_VERSION_MAJOR)
>
> -SYLPHEED_CONF_OPT = --disable-gtkspell \
> -                    --includedir=$(STAGING_DIR)/usr/include
> +SYLPHEED_CONF_OPT = --disable-gtkspell
>
>   SYLPHEED_DEPENDENCIES = host-pkg-config libgtk2
>
> +define SYLPHEED_PRECONFIGURE
> +	for i in $$(find $(@D) -name "Makefile*"); do \
> +		sed -i 's:-I$$(includedir)::g' $$i; \
> +	done
> +endef

  Put a small explanatory comment here, e.g.:

# Remove the -I$(includedir) from the Makefile, because it would
# refer to the host's /usr/include.


  Regards,
  Arnout

> +
> +SYLPHEED_PRE_CONFIGURE_HOOKS += SYLPHEED_PRECONFIGURE
> +
>   ifeq ($(BR2_PACKAGE_OPENSSL),y)
>   SYLPHEED_DEPENDENCIES += openssl
>   SYLPHEED_CONF_OPT += --enable-ssl

-- 
Arnout Vandecappelle                               arnout at mind be
Senior Embedded Software Architect                 +32-16-286540
Essensium/Mind                                     http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium                BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F

  reply	other threads:[~2012-10-07 11:09 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-06 18:55 [Buildroot] [PATCH v2] sylpheed: Fix includedir Valentine Barshak
2012-10-07 11:09 ` Arnout Vandecappelle [this message]
2012-10-07 22:39   ` Valentine Barshak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50716305.9040802@mind.be \
    --to=arnout@mind.be \
    --cc=buildroot@busybox.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.