From: Roland Stigge <stigge@antcom.de>
To: nic_swsd@realtek.com, romieu@fr.zoreil.com, netdev@vger.kernel.org
Subject: r8169 delay / segfault
Date: Fri, 12 Oct 2012 21:35:37 +0200 [thread overview]
Message-ID: <50787109.7080605@antcom.de> (raw)
Hi,
on a Samsung laptop (x86_64, kernel 3.6.0), I get the following messages in the kernel
log after a suspend/resume cycle (doesn't happen after every suspend/resume but sometimes):
Oct 12 21:02:27 darwin kernel: [ 4289.829755] r8169 0000:02:00.0: wake-up capability disabled by ACPI
Oct 12 21:02:27 darwin kernel: [ 4289.830351] r8169 0000:02:00.0: eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Oct 12 21:02:27 darwin kernel: [ 4289.831077] r8169 0000:02:00.0: eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Oct 12 21:02:27 darwin kernel: [ 4289.831671] r8169 0000:02:00.0: eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Oct 12 21:02:27 darwin kernel: [ 4289.832214] r8169 0000:02:00.0: eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Oct 12 21:02:27 darwin kernel: [ 4289.832757] r8169 0000:02:00.0: eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Oct 12 21:02:27 darwin kernel: [ 4289.833303] r8169 0000:02:00.0: eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Oct 12 21:02:27 darwin kernel: [ 4289.834885] r8169 0000:02:00.0: eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Oct 12 21:02:27 darwin kernel: [ 4289.835429] r8169 0000:02:00.0: eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Oct 12 21:02:27 darwin kernel: [ 4289.835972] r8169 0000:02:00.0: eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Oct 12 21:02:27 darwin kernel: [ 4289.836518] r8169 0000:02:00.0: eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Oct 12 21:02:27 darwin kernel: [ 4289.857820] r8169 0000:02:00.0: eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Oct 12 21:02:27 darwin kernel: [ 4289.858371] r8169 0000:02:00.0: eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Oct 12 21:02:27 darwin kernel: [ 4289.858920] r8169 0000:02:00.0: eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[...]
Oct 12 21:04:38 darwin kernel: [ 4422.635491] r8169 0000:02:00.0: eth0: rtl_eriar_cond == 1 (loop: 100, delay: 100).
Oct 12 21:04:38 darwin kernel: [ 4422.635499] r8169 0000:02:00.0: eth0: link up
Oct 12 21:04:56 darwin kernel: [ 4441.319712] ------------[ cut here ]------------
Oct 12 21:04:56 darwin kernel: [ 4441.319733] WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0xe3/0x153()
Oct 12 21:04:56 darwin kernel: [ 4441.319737] Hardware name: 900X3C/900X4C/900X4D
Oct 12 21:04:56 darwin kernel: [ 4441.319741] NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out
Oct 12 21:04:56 darwin kernel: [ 4441.319744] Modules linked in: nf_conntrack_ipv6 nf_defrag_ipv6 xt_LOG xt_limit xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 x
t_state nf_conntrack_ftp xt_conntrack nf_conntrack ip6table_filter ip6_tables iptable_filter ip_tables ebtable_nat ebtables x_tables parport_pc ppdev lp parpo
rt bnep rfcomm binfmt_misc uinput nfsd auth_rpcgss nfs_acl nfs lockd fscache sunrpc loop fuse snd_hda_codec_hdmi snd_hda_codec_realtek joydev arc4 coretemp kv
m_intel kvm btusb iwldvm bluetooth crc32c_intel mac80211 ghash_clmulni_intel iTCO_wdt iTCO_vendor_support aesni_intel aes_x86_64 snd_hda_intel snd_hda_codec s
nd_hwdep snd_pcm aes_generic ablk_helper snd_page_alloc cryptd snd_seq snd_timer snd_seq_device samsung_laptop evdev snd iwlwifi i915 microcode drm_kms_helper
drm soundcore psmouse pcspkr cfg80211 i2c_i801 lpc_ich i2c_algo_bit serio_raw mfd_core rfkill i2c_core battery acpi_cpufreq mperf wmi video ac button process
or ext4 crc16 jbd2 mbcache dm_mod sg sd_mod crc_t10dif ehci_hcd xhci_hcd fan th
Oct 12 21:04:56 darwin kernel: ermal ahci thermal_sys libahci usbcore r8169 mii usb_common libata scsi_mod
Oct 12 21:04:56 darwin kernel: [ 4441.319903] Pid: 0, comm: swapper/1 Not tainted 3.6.0 #1
Oct 12 21:04:56 darwin kernel: [ 4441.319906] Call Trace:
Oct 12 21:04:56 darwin kernel: [ 4441.319910] <IRQ> [<ffffffff8103c914>] ? warn_slowpath_common+0x76/0x8a
Oct 12 21:04:56 darwin kernel: [ 4441.319932] [<ffffffff8103c9c0>] ? warn_slowpath_fmt+0x45/0x4a
Oct 12 21:04:56 darwin kernel: [ 4441.319941] [<ffffffff812b9b62>] ? netif_tx_lock+0x67/0x7a
Oct 12 21:04:56 darwin kernel: [ 4441.319954] [<ffffffff812b9c58>] ? dev_watchdog+0xe3/0x153
Oct 12 21:04:56 darwin kernel: [ 4441.319963] [<ffffffff810492e1>] ? run_timer_softirq+0x19f/0x2b0
Oct 12 21:04:56 darwin kernel: [ 4441.319974] [<ffffffff81068208>] ? trigger_load_balance+0x50/0x1df
Oct 12 21:04:56 darwin kernel: [ 4441.319980] [<ffffffff812b9b75>] ? netif_tx_lock+0x7a/0x7a
Oct 12 21:04:56 darwin kernel: [ 4441.319989] [<ffffffff811b8320>] ? timerqueue_add+0x80/0xa0
Oct 12 21:04:56 darwin kernel: [ 4441.319998] [<ffffffff8104332f>] ? __do_softirq+0xac/0x1d1
Oct 12 21:04:56 darwin kernel: [ 4441.320007] [<ffffffff81073706>] ? ktime_get+0x62/0x6a
Oct 12 21:04:56 darwin kernel: [ 4441.320015] [<ffffffff81078109>] ? clockevents_program_event+0x9a/0xb6
Oct 12 21:04:56 darwin kernel: [ 4441.320025] [<ffffffff81367ebc>] ? call_softirq+0x1c/0x30
Oct 12 21:04:56 darwin kernel: [ 4441.320036] [<ffffffff8100f8fe>] ? do_softirq+0x3a/0x78
Oct 12 21:04:56 darwin kernel: [ 4441.320043] [<ffffffff81043611>] ? irq_exit+0x3a/0x91
Oct 12 21:04:56 darwin kernel: [ 4441.320052] [<ffffffff8102845c>] ? smp_apic_timer_interrupt+0x74/0x82
Oct 12 21:04:56 darwin kernel: [ 4441.320060] [<ffffffff813677ca>] ? apic_timer_interrupt+0x6a/0x70
Oct 12 21:04:56 darwin kernel: [ 4441.320062] <EOI> [<ffffffff81078109>] ? clockevents_program_event+0x9a/0xb6
Oct 12 21:04:56 darwin kernel: [ 4441.320077] [<ffffffff811f8174>] ? intel_idle+0xdf/0x10a
Oct 12 21:04:56 darwin kernel: [ 4441.320084] [<ffffffff811f814f>] ? intel_idle+0xba/0x10a
Oct 12 21:04:56 darwin kernel: [ 4441.320094] [<ffffffff812810b3>] ? cpuidle_enter_state+0xa/0x31
Oct 12 21:04:56 darwin kernel: [ 4441.320100] [<ffffffff812811a7>] ? cpuidle_idle_call+0xcd/0x184
Oct 12 21:04:56 darwin kernel: [ 4441.320107] [<ffffffff81014f30>] ? cpu_idle+0x9c/0xe6
Oct 12 21:04:56 darwin kernel: [ 4441.320117] [<ffffffff81353e4f>] ? start_secondary+0x1d2/0x1d8
Oct 12 21:04:56 darwin kernel: [ 4441.320122] ---[ end trace 2ae2e4a392ef84b6 ]---
Oct 12 21:04:56 darwin kernel: [ 4441.330385] r8169 0000:02:00.0: eth0: rtl_chipcmd_cond == 1 (loop: 100, delay: 100).
Oct 12 21:04:56 darwin kernel: [ 4441.331592] r8169 0000:02:00.0: eth0: rtl_csiar_cond == 1 (loop: 100, delay: 10).
Oct 12 21:04:56 darwin kernel: [ 4441.332727] r8169 0000:02:00.0: eth0: rtl_ephyar_cond == 1 (loop: 100, delay: 10).
Oct 12 21:04:56 darwin kernel: [ 4441.333866] r8169 0000:02:00.0: eth0: rtl_ephyar_cond == 1 (loop: 100, delay: 10).
Oct 12 21:04:56 darwin kernel: [ 4441.343912] r8169 0000:02:00.0: eth0: rtl_eriar_cond == 1 (loop: 100, delay: 100).
Oct 12 21:04:56 darwin kernel: [ 4441.353943] r8169 0000:02:00.0: eth0: rtl_eriar_cond == 1 (loop: 100, delay: 100).
Oct 12 21:04:56 darwin kernel: [ 4441.363973] r8169 0000:02:00.0: eth0: rtl_eriar_cond == 1 (loop: 100, delay: 100).
Oct 12 21:04:56 darwin kernel: [ 4441.374003] r8169 0000:02:00.0: eth0: rtl_eriar_cond == 1 (loop: 100, delay: 100).
Oct 12 21:04:56 darwin kernel: [ 4441.384034] r8169 0000:02:00.0: eth0: rtl_eriar_cond == 1 (loop: 100, delay: 100).
Oct 12 21:04:56 darwin kernel: [ 4441.394065] r8169 0000:02:00.0: eth0: rtl_eriar_cond == 1 (loop: 100, delay: 100).
Oct 12 21:04:56 darwin kernel: [ 4441.404196] r8169 0000:02:00.0: eth0: rtl_eriar_cond == 1 (loop: 100, delay: 100).
Oct 12 21:04:56 darwin kernel: [ 4441.414334] r8169 0000:02:00.0: eth0: rtl_eriar_cond == 1 (loop: 100, delay: 100).
Oct 12 21:04:56 darwin kernel: [ 4441.424383] r8169 0000:02:00.0: eth0: rtl_eriar_cond == 1 (loop: 100, delay: 100).
Oct 12 21:04:56 darwin kernel: [ 4441.434412] r8169 0000:02:00.0: eth0: rtl_eriar_cond == 1 (loop: 100, delay: 100).
Oct 12 21:04:56 darwin kernel: [ 4441.444546] r8169 0000:02:00.0: eth0: rtl_eriar_cond == 1 (loop: 100, delay: 100).
Oct 12 21:04:56 darwin kernel: [ 4441.454683] r8169 0000:02:00.0: eth0: rtl_eriar_cond == 1 (loop: 100, delay: 100).
Oct 12 21:04:56 darwin kernel: [ 4441.454689] r8169 0000:02:00.0: eth0: link up
I copied a bigger part of the kernel log at http://antcom.de/kernel/dmesg.
Please tell me how I can help debugging or what else information you need.
Thanks in advance,
Roland
next reply other threads:[~2012-10-12 19:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-12 19:35 Roland Stigge [this message]
2012-10-12 21:05 ` r8169 delay / segfault Francois Romieu
2012-10-12 22:14 ` Roland Stigge
2012-10-13 9:59 ` Roland Stigge
2012-10-14 21:32 ` Francois Romieu
2012-10-18 21:06 ` Roland Stigge
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50787109.7080605@antcom.de \
--to=stigge@antcom.de \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
--cc=romieu@fr.zoreil.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.